Trailer Wiring Harness Installation - 1999 Mazda Protege
Today on our 1999 Mazda Protg, we'll be installing part number 119175KIT, the draw type four pole wiring kit. After opening the trunk on our Protg, we'll need to start by removing the threshold molding from the trunk. To do this we'll remove the clips here and here as well as--it's the same on the other side. A small screw driver works great for these. Now that we have our clips out, we can go ahead and use our panel tool to reach underneath the threshold and pry up. We'll work all the way across the threshold, making sure to get us close to the clips as possible and once they have all been released, we can go ahead and remove the threshold for re-installation later.
Trailer Hitch Installation - 1999 Mazda Protege - Hidden Hitch
Today, on the 1999 Mazda Protege, we'll be installing Hidden Hitch part number 60927. Here are few measurements to help you in selecting your accessories. From the center of the hitch pin hole to the outermost part of the bumper is three and a quarter inches. And from the top of the receiver tube to the ground is 11-1/4 inches. These will help you in selecting accessories such as a cargo carrier or a bike rack. Now, we'll go ahead with our install.
