Jeep YJ owners are most interested in these products
change vehicle
Jeep YJ Questions and Answers
- Will Hidden Hitch Class III # 87002 Fit a 1989 Jeep Wrangler TJ as Well as a YJ
- The Hidden Hitch Class III hitch you mentioned, part # 87002 will fit a 1997-2003 Jeep Wrangler TJ. I have linked you to the installation instructions.
If you need to wire your Jeep for towing, you can use the hardwire kit, part # 18525.
You might also need the following:
Ball mount, part # 2923
1-7/8 inch trailer ball, part # 19260
2 inch trailer ball, part # 19247
view full answer...
- Bumper with Winch Plate for a 1993 Jeep Wrangler YJ
- The Westin front bumper # 42-2005 does not have a winch plate available for it. But we do have the Bestop HighRock bumper with winch plate, # B4290801, for the 1993 Jeep Jeep Wrangler (YJ). I have included a link to the installation instructions for you to view.
The HighRock bumpers are great because you can add several different accessories to them. There is a grille guard in black, # B4290601, or in stainless steel, # B4290600. There is also the approach/departure roller # B4290501. A bumpe
view full answer...
- What Size Hole Should be Drilled to Install a 4 inch Optronics Clearance Light
- You would want to drill a 4-1/2 inch hole to install the 4-inch Optronics Trailer Light # STL45RB.
You will also need a Straight 3-Wire Pigtail # A45PB to wire in the # STL45RB.
view full answer...
- Does the Sunrider Soft Top Snap On to a 1993 Jeep YJ Wrangler
- If you look at the installation instructions I have linked for the Bestop Sunrider Soft Top with Fold-back Sunroof, # B5169809, you will see that the top does snap on at various points. This top comes with the correct mounting system anyway should there be some variation between what you have and what the top requires for installation. A replacement skin only is not available.
view full answer...
- Is Snowport Plow Compatible with Agri-Cover SnowSport Front Mount Hitch # A40163 for 1995 Jeep YJ
- According to my research, the Agri-Cover SnowSport Front Mount Hitch for a 1995 Jeep YJ # A40163 will work with the SnowSport plow at the proper height as long as the vehicle still has the factory bumper and square headlights.
I have included the installation guide for the Agri-Cover SnowSport HD Snowplow 96 inches # A40040HD. It shows the clearance beneath the properly-installed receiver is 8 inches to 16 inches. The clearance beneath the plow's push frame is 8 inches to 10 inches.
Finall
view full answer...
- Driver and Passenger Replacement Seats for a 1988 Jeep YJ from Bestop
- The passenger seat that is compatible with the Bestop TrailMax II Pro Driver Seat that you referenced is the Bestop TrailMax II Pro Passenger Seat, # B3946015. These seats are also available in a vinyl material as part # B3945015, for the passenger seat and # B3945115 for the driver seat.
If you no longer have the seat riser or slider, then you will also want to pick up a replacement seat riser, # B51254, and the seat slider, # B51255.
For the rear bench seat, you will want to look at the
view full answer...
- Parts Needed to Flat Tow a 1994 Jeep YJ Wrangler Behind a Motor Home
- The first thing you are going to want to check is the vehicle owners manual to determine if the Jeep can be flat towed and if there are any special requirements. Both base plate kits for the 1994 Jeep YJ, # 1409-1 and # 1409-3 are standard kits and will fit your Jeep. The only difference is the design of each kit. Kit # 1409-3 has a crossmember and 1409-1 does not. And since they cost the same you cannot really go wrong with either one.
For a tow bar, I have included a link to all of the tow
view full answer...
- Replacement Top and Roll Cage Cover Recommendation for a 1993 Jeep Wrangler YJ
- The Bestop Sport Bar Cover # B8000915 that you referenced is confirmed to fit your 1993 Jeep YJ and is secured by zipper. Check out the installation instructions I attached that detail the installation process.
If you are looking for a replacement top for the factory hardware of your 1993 Jeep YJ that also includes tinted rear and side windows and untinted half door skins you would want a Bestop Replace-A-Top for Jeep # B5112315.
If you are looking for just the replacement top without the
view full answer...
- How To Flat Tow a Raised 1993 Jeep Wrangler YJ With RoadMaster Falcon All Terrain Tow Bar # RM-522
- Towing a raised 1993 Jeep Wrangler YJ with a motor home-mounted tow bar like the RoadMaster Falcon All Terrain Tow Bar, part # RM-522, which will have an upward or downward slope puts undue strain on the entire towing system.
For that reason, do not tow if the tow bar is not within the Safe Zone. Which means no more than three inches above or below the center of the motor home receiver. Towing a vehicle with a tow bar that is not within the Safe Zone will result in significant wear and tear o
view full answer...
- Trailer Wheel Pilot Hole Diameter is Too Small for New Hub and Drum Assemblies
- If the pilot hole on the wheel was larger than 4-3/4 inches, and the wheel is center on the hub using the lug nut rather than wheel bolts, it would not matter. But since the wheel pilot hole is smaller, you will not be able to use the hubs you purchased without also replacing the wheels.
I went out to the warehouse and measured a Trailer Hub and Drum Assembly, # 42866UC3, to determine the diameter of the center portion that goes through the pilot hole of the wheel. Using some digital dial cal
view full answer...
- Recommend Hitch That Will Fit My 1990 Jeep Wrangler YJ
- I do have a hitch that will fit your 1990 Jeep Wrangler YJ, but the item you selected, Draw-Tite Trailer Hitch, part # 75054 will not fit.
For a Class III 2 Inch hitch like part # 75054, for your Jeep, you will need the Hidden Hitch Trailer Hitch, part # 87002.
The Draw-Tite hitch # 75054 that you selected is designed to fit 1984-2001 Jeep Cherokee, and the 1984 Jeep Wagoneer Downsize.
To complete your towing setup you will need the following items:
Ball Mount, part # 2923
1-7/8 Inc
view full answer...
- Should I Run Lower PSI In My Trailer Tires When Towing An Empty Trailer With My 1993 Jeep YJ
- You always want to have the tires on your trailer inflated to the maximum tire pressure as specified on the tire. If you run the trailer tires at a lower PSI, the thicker sidewall of the trailer tires would cause the tires to heat up quicker and would reduce the life of the tires.
I have linked an FAQ on trailer tires that you may find as a useful reference.
view full answer...
- What Wiring Harness Is Needed To Use The Factory Taillights As Towing Lights On A 1992 Jeep YJ
- You will need the Roadmaster Universal Hy-Power Diode Wiring Kit, # RM-154, which will give you everything you need to wire your Jeep YJ so the taillights will work as towing lights. It comes with diodes that will protect both vehicles wiring systems by preventing feedback.
The Tow Ready T-One Vehicle Wiring Harness, # 118356, is for installing a 4-Pole flat trailer connector on your 1992 Jeep YJ. It is a wiring harness that you would use to connect to a trailer if you were towing a trailer w
view full answer...
- What is the Height of the Seat Back and Head Rests on a BesTop TrailMax II Fold and Tumble Seat
- I called Bestop, and from the top of the seat, where your rear would be, to the top of the headrests when fully extended is 26 inches.
view full answer...
- Will Bestop Element Front Doors # B5180801 Fit a 1988 Jeep YJ Hard Top
- The item you selected, Bestop Element Front Doors, part # B5180801, will fit your 1988 Jeep Wrangler (or YJ). These doors are a great option for summer, and add a bit of style to your Jeep.
The Bestop Element Front Doors # B5180801,will fit 1987-1995 Jeep YJ, 1980-1995 Jeep Wrangler, and the 1980-1986 Jeep CJ-7.
I have linked an FAQ on Jeep Doors.
view full answer...
- Will Rage Motorcycle Carrier, # MX600, fit On Jeep YJ And Carry 300 Pound Scooter
- The Rage Motorcycle Carrier, # MX600, is designed to carry motorcycles with the engine located in the center of the bike because the weight is then evenly distributed on the carrier. On the rear engine scooter over 300 lbs. the weight is all towards the rear of the scooter, so when it is put on the carrier that weight puts stress all on one side of the carrier.
Also the tongue weight capacity of a Class III hitch for your Jeep YJ is 350 lbs. With the tongue weight being at 350 lbs. that would
view full answer...
- Wiring a 1994 Jeep YJ for Towing Behind a Motorhome
- The T-One harness you were looking at is to tow a trailer behind the Jeep. It will not work in reverse to tow the Jeep behind a motorhome. You will need RoadMaster part # RM-154. There are wiring diagrams on the page to show you how to wire it depending on the taillight configuration of your motorhome.
view full answer...
- Dimensions of Vehicle Mounting Bracket on Tow Ready Adjustable Tow Bar # 63180
- I went out to the warehouse and measured the mounting holes in the mounting bracket on the Tow Ready Adjustable Tow Bar, item # 63180. These are 4 inches apart on center. The flat part of the mounting bracket is 2 inches by 5-1/2 inches.
view full answer...
all Jeep YJ questions
