Ford Aerostar owners are most interested in these products

Ford Aerostar Questions and Answers

Will the Curt X5 Fit a Pro Series 5th Wheel Trailer Hitch and Fit Over a Bed Mat
Curt states that bed mats can affect the fit of the X5 # 16310. Basically if the Curt X5 can be pinned in like normal then it can be used with a bed mat. If it cannot then you would need to trim the mat in the shape of the X5 in order to get it to pin in and lock properly. Because every truck and bed mat combination is going to be slightly different there is no set list of vehicles and mat combinations available to determine if it will fit or not. The pin hole center for the X5 is approximat
view full answer...

Brake Lights Not Working on Trailer Towed By 1996 Ford Aerostar
If you are using an aftermarket connecter, when the trailer connector was installed a tail light converter might not have been used. If this is the case, you will not be getting the signal for the brake lamps. This would explain the issue you are having. If this is an OEM trailer connector, typically the towing circuits are protected by fuses located in the engine compartment. Check the fuses and replace if needed. Trailer tail lights have the brake lamp and the turn signal combined onto the
view full answer...

Towing Mirror Recommendations for a 1995 Ford Aerostar
The CIPA door mount towing mirror, # 11650, is a universal fit item designed to fit most vehicles so there is a very high chance it will fit your 1995 Ford Aerostar. I have included a link to a video review of the mirror that also shows how it installs so you have a better idea of the fit. We also have some custom fit mirrors for your van. CIPA mirrors # 11501 and # 11502 will fit over your existing mirrors as long as they look like the mirror I have pictured here for you.
view full answer...

Is There A Hitch Available for the 1995 Ford Aerostar that Allows The Spare to be Retained
The Draw-Tite Trailer Hitch # 36215 that you referenced does not require that the spare tire be removed to be installed on a 1995 Ford Aerostar extended or standard body. To complete your towing setup you may be interested in purchasing the following products: etrailer Ball Mounts # 989900 Draw-Tite Wiring # 119175KIT (instructions and installation video attached)
view full answer...

Will My OEM Full-Size Spare Fit With Draw-Tite Hitch # 75028 On 1995 Ford Aerostar Extended AWD
Yes, when using the Draw-Tite Trailer Hitch, part # 75028, you will still be able to keep the OEM full-size spare on your 1995 Ford Aerostar Extended AWD. The 6000lbs weight distribution rating means that if you use a weight distribution system with the Draw-Tite # 75028 trailer hitch such as the Reese system # RP66087, the hitch will have a gross towing capacity of up to 6000lbs and a maximum tongue weight capacity of 600lbs. Part # RP66087 is a weight distribution system that features dual-
view full answer...

Correct Wires on a 1991 Ford Aerostar to Install Hopkins Vehicle Wiring Converter # HM48915
In order to find the correct wires for installation of the Hopkins Vehicle Wiring Converter, # HM48915, you will need a circuit tester like # 3808. This wiring harness is designed for use on vehicles that have amber or independent bulb turn signals which should be what is on your 1991 Ford Aerostar. First, ground the white wire to a bare metal surface. Next, using the circuit tester, probe the wires behind the driver side tail light until you find the one that carries a constant signal when t
view full answer...

Wiring Harness for 1996 Ford Aerostar
We have the Upgraded Circuit Protected Taillight Converter Hardwire Kit with 4 Pole End (Includes Testers), code # 119175KIT, which you can hardwire in your 1996 Ford Aerostar normal body. This wiring kit comes with quick splices, which makes tapping into your wires so quick and easy, and a circuit tester which will help you identify the wires behind your tail lights. If you are towing and have a 7-way plug or 6-way plug on your trailer, you can take your 4-way plug to a 7-way with the Brake
view full answer...

Trailer Tail Lights Come On when Brakes are Not Used with a 2004 Ford Windstar
The problems might be related. I would first replace that burned out bulb, and if the problem is not fixed, use a circuit tester, like part # 40376, and check each pin on your connector while that function is activated. (For example, pin for yellow wire-left turn signal, pin for green wire-right turn signal, pin for brown wire-running lights.) You might also use that tester and check your converter to make sure it's working as it should. Make sure there is signal going in one side of the box, an
view full answer...

What Part do I need to Convert My 1990 Ford Aerostar that has Separate Turn and Brake Lights
What you will need is a Tail light converter like part # 119175KIT. This item takes the two separate signals from the brake and turn signal functions, and allows them to use the same wire and bulb on the trailer. The kit contains everything you need to complete the installation.
view full answer...

Cargo Barrier for a 1988 Ford Areostar
The Draw-Tite Universal Pet Barrier, part # 20045 would work great for your needs. The barrier is height adjustable up to 45 inches, and is adjustable for widths up to 65 inches.
view full answer...

Availibility of Replacement Hardware Kit for Draw-Tite Class III Hitch Part # 36215
We offer replacement hardware for that hitch. Simply use part # RHK, and in the box asking for the manufacturer, type in Draw-Tite, and type in 36215 as the part number.
view full answer...