Today on our 1996 Chevy Blazer, we're going to install a curt hitch part number C13020. Each process we do here on the driver side is going to be repeated identically on the passenger side. A total of six attachment points, three on each sides. Our fasteners will be our 1/2" carriage bolt and block along with a 1/2 plunge knot because this vehicle doesnt have a spare tire, we're ready to go ahead and put our hitch directly into position. We'll use our bolt and block to go from inside to frame rail out to hold into position once we get into place.Now, it's a good time to get an extra set of hands that will hold the hitch into place while installing your fasteners. We'll install each fasteners finger tight until we get them all in place.
Today on this 2000 Chevrolet Blazer we are going to be installing part number 36244 from Draw-Tite. This also applies to Hidden Hitch part number 90183. We are going to go ahead and show you the mounting locations for our hitch. Its going to be the two factory bumper bolts that are holding your bumper in position, as well as the larger oval hole near the rear of the vehicle. It is going to be the same on the passenger side as well. :26