Buick Regal owners are most interested in these products

Buick Regal Questions and Answers

Will Thule Cargo Box With Channel Connectors Fit on RhinoRack 2500 Series Roof Rack, Part # DH1250S
For the 4-door Regal with naked roof (no factory-installed side rails or crossbars) we offer 7 different rack systems from Rhino and Yakima and all can be seen on the provided link. I have also included an article on roof racks that may help you as you consider your options. The available racks offer various lengths and shapes of crossbars and also differing weight capacities. I was able to find your vehicle specifications online, but I could not confirm the roof weight capacity so you will want
view full answer...

How to Determine the Wire Functions of a 4-way on a 2002 Buick Regal
Most likely you would just use the black wire in place of the yellow wire, but I would recommend you wire by function that way you know exactly what is going to what. If this 4-way is on the vehicle connector I would use a circuit tester like our part # 40376 and test the functions on the 4-way by having a friend apply the different tail light functions and then use the circuit tester to see which wire has power. Check out the video I attached that shows how to do this. Now to test the wires
view full answer...

Trailer Hitch Options for a 2004 Buick Regal
We do offer two trailer hitches for your 2004 Buick Regal. Our most popular hitch for your vehicle is the Draw-Tite Class I Sport Frame Hitch, part # 24660. This hitch comes with a tongue weight capacity of 200 lbs and a gross towing weight capacity of 2000 lbs. These weight ratings can also be limited by the tongue weight and towing weight capacity of your vehicle. We also offer the Draw-Tite Class II Hitch, part # 36241, that comes with higher tongue and towing weight capacities of 300 lbs
view full answer...

How to Measure Ball Mount Rise for Draw-Tite Sportframe Ball Mount # 3594 on a 2002 Buick Regal
Ball mount rise, or drop, is determined by inserting the ball mount into the hitch on your vehicle and measuring from the top of the hitch opening to the top of the ball mount platform. I added a photo showing how the rise and length would be measured on the Draw-Tite Ball Mount # 3594. We also have an informational article that explains how to choose the correct ball mount for your application. All Class I and Class II trailer hitches are tested and rated with the specific ball mount for tha
view full answer...

Thule K-Summit Tire Chains, # TH02230K44, for a 2002 Buick Regal
The Premium Self-adjusting Snow Tire Chains by Thule - K-Summit, # TH02230K44, has an adapter that fits over a lug nut on the wheel and gets tightened down to secure the center portion of the chains to the wheel. I have included a link to a video showing how the chains work. These chains are among the easiest to install since they are self adjusting and do not require a lot of clearance in the wheel well to operate. They work well in snow and ice. You would have to remove the plate that cover
view full answer...

Recommended Bike Rack for a 2002 Buick Regal
The Thule Passage 3 Bike Carrier Trunk Mounted Bike Rack Carrier # TH911XT is not recommended because the vehicle is unable to support the weight at the point where the carrier must be placed. The best option is to install a hitch like the Draw-Tite Class I Sportframe Trailer Hitch Receiver Hitch # 24660 and installing a bike rack into it like the SportRack 2 Bike Hitch Mounted Rack with Wheel Mount Cradles # A30901. I have included a link to the instructions for the hitch and videos for
view full answer...

What Trailer Connector Wiring Fits a 2002 Buick Regal and how do I Install It
You will need to use the 4-Pole Hardwire Kit, part # 18252. The kit includes the circuit tester and quick splices needed to complete the installation. We have an online video that shows how to do this on a Dodge Neon, but the procedure will be the same.
view full answer...