Today in our 2012 Audi A3, we're going to install Part # 11192 from Curt. First step is to remove the rear bumper. Now the four torque screws you have to remove at each side of the wheel well. Were done with the driver side, repeat the same process on the passenger side then we will remove both taillights, now the fastener on the inside that we have to loosen up so we can take apart the taillights. If you remove both taillights by using a socket through a port on the inside of the trunk, we'll rotate the lights out so it taps on the backside stand tap. We'll rotate them; pull straight out from the side to remove the lens.