Brake Winch - Plated with Black Powder Coat Reel - 1,500 lb
1,500 lb capacity brake winch for industrial use. Capacity is based on the direct line pull on the third layer line drum. Capacity is reduced as line builds up on drum. Extra heavy duty construction for long life. Gear cover enclosed braking mechanism, 1-1/8" reel hub diameter. Load locks in place when handle is released. Great for grain augers, boat lifts, pickup cranes, etc. Lift and lower with ease. 150 lb minimum load required for winch to function properly. Zinc TUFFPLATE base and hardware, powder-coated black reel. Handle included.
All D-L winches are built for multipurpose hauling and lifting operations.
- Capacity: 1,500 lbs
- Extra heavy duty construction
- Gear cover enclosed mechanism
- 1-1/8 " reel hub diameter
- Load locks into place
- 150 lb. minimum load
- Zinc TUFFPLATE base and hardware
- Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish. Results of lab test using 5 percent neutral salt spray confirms our TUFFPLATE finish provides in excess of 500 hours against First Red Rust and in excess of 100 hours of First White Corrosion.
- Powder-coated black reel
- Handle included
- 5 year limited warranty
- Made in the USA
| Brake Winch Specifications |
| Model |
Rated Capacity |
Min. Operating Load Required |
Drum Hub Diameter |
Gear Ratio |
Handle Length |
Max. Mechanical Advantage |
Max. Drum Capacity - Cable (3) |
Max. Drum Capacity - Strap |
| DL10770 |
1,500 lb.(1) |
150 lb. |
1-1/8" |
6:1 |
12-1/4" |
106.9 |
1/4" x 52' |
- |
(1) Capacity is based on direct line pull on the third layer of line on drum. Capacity is reduced as line builds up on drum.(3) Drum capacity based on cable size listed. (Cable is not included.) B Series winches will only work with cables. They are not strap adaptable. |
10770 Brake Winch - Plated with Black Powder Coat Reel - 1,500 lb by Dutton-Lainson Model B1500
Winches are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
