Worm Gear, Split Reel Loop Drive - 1,500 lb
Applications requiring safe, controlled movement of loads need the D-L worm gear winch. The reel automatically stops turning whenever cranking is stopped. There is no free wheel mode, no special mechanism required to stop gear movement and they do not require a minimum load for operation. The split drum will allow cable to pull from opposite directions.
- Capacity: 1,500 lbs.
- Capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum
- Laminated high carbon steel gears are heat treated for longer life
- Heavy gauge embossed steel base for extra strength
- Permanently lubricated bearings on drive shaft are maintenance free
- Split Reel allows operation of 2 lines for greater versatility
- Loop drive allows the winch to be mounted out of reach and operated with an extension pole fitted to engage the loop
- Heavy duty 1/2" variable speed drill may speed up operation
- Powder coated copper bronze finish
- 5 year limited warranty
- Made in the USA
All D-L winches are built for multipurpose hauling and lifting operations. They are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
| Worm Gear Specifications |
|---|
| Model | Winch Description | Rated Capacity (1) | Drum Hub Diameter | Gear Ratio | Handle Length | Max. Mechanical Advantage | Max. Drum Capacity - Cable (2) |
|---|
| DL10956 | Split Reel Loop Drive | 1,500 lb. | 1-1/2" | 30:1 | -- | -- | 1/4" x 43' (21-1/2' per side) |
(1) Capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum. (2) Drum capacity shown is based on cable size listed. (Cable not included.) |
10956 Worm Gear, Split Reel Loop Drive - 1,500 lb by Dutton-Lainson Model WG1500SRLD
