Worm Gear, Regular Drum Handle Drive - 1,500 lb
Applications requiring safe, controlled movement of loads need the Dutton-Lainson worm gear winch. The reel automatically stops turning whenever cranking is stopped. There is no free wheel mode, no special mechanism required to stop gear movement and they do not require a minimum load for operation.
- Capacity: 1,500 lbs.
- Capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum
- Laminated high carbon steel gears are heat treated for longer life
- Heavy gauge embossed steel base for extra strength
- Permanently lubricated bearings on drive shaft are maintenance free
- Handle drive
- Heavy duty 1/2" variable speed drill may speed up operation
- Powder coated copper bronze finish
- 5 year limited warranty
- Made in the USA
All D-L winches are built for multipurpose hauling and lifting operations. They are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
| Worm Gear Specifications |
|---|
| Model | Winch Description | Rated Capacity (1) | Drum Hub Diameter | Gear Ratio | Handle Length | Max. Mechanical Advantage | Max. Drum Capacity - Cable (2) |
|---|
| DL10950 | Reg. Drum Handle Drive | 1,500 lb. | 1-1/2" | 30:1 | 7" | 240 | 1/4" x 43' |
(1) Capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum. (2) Drum capacity shown is based on cable size listed. (Cable not included.) |
10950 Worm Gear, Regular Drum Handle Drive - 1,500 lb by Dutton-Lainson Model WG1500
See Larger