Pulling Winch - Standard Duty - 1,300 lb
All D-L winches are built for multipurpose hauling and lifting operations.
- 1,300 lb capacity winch for horizontal pulling applications
- 7/8" drum hub diameter
- High carbon steel gears
- Permanently lubricated bearings
- Ergonomic handle grip
- Zinc TUFFPLATE finish
- Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish. Results of lab test using 5 percent neutral salt spray confirms our TUFFPLATE finish provides in excess of 500 hours against First Red Rust and in excess of 100 hours of First White Corrosion.
- Handle included
- 5 year limited warranty
- Made in the USA
| Single Speed Pulling Winch Specifications |
|---|
| Model | Rated Capacity (2) | Drum Hub Diameter | Gear Ratio | Handle Length | Max. Mechanical Advantage | Reversible Ratchet | Max. Drum Capacity - Cable (3) | Max. Drum Capacity - Strap |
|---|
| DL14362 | 1,300 lb. | 7/8" | 4.4:1 | 7" | 56 | | 7/32" x 56' | 31' |
(2) Capacity is based in direct pull on the third layer of line on the drum. Capacity is reduced as the line builds up on the drum.(3) Drum capacity based on cable size listed. (Cable is not included.) |
14362 Pulling Winch - Standard Duty - 1,300 lb by Dutton-Lainson Model DL1300A
Winches are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
