Pulling Winch - 2 Speed Heavy Duty - 3,500 lb
All D-L winches are built for multipurpose hauling and lifting operations.
- Capacity: 3,500 lbs
- 2-speed winch for horizontal pulling applications
- 1-5/16" drum hub diameter
- High carbon steel heat-treated gears
- Permanently lubricated bearings
- Reversible ratchet
- Ergonomic handle grip
- Quick-attach handle allows easy change from high speed to low gear, for heavier loads
- Zinc TUFFPLATE finish
- Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish. Results of lab test using 5 percent neutral salt spray confirms our TUFFPLATE finish provides in excess of 500 hours against First Red Rust and in excess of 100 hours of First White Corrosion.
- Hand break standard
- Handle included
- 5 year limited warranty
- Made in the USA
| Double Speed Pulling Winch Specifications |
|---|
| Model | Rated Capacity (2) | Drum Hub Diameter | Gear Ratio | Handle Length | Max. Mechanical Advantage | Reversible Ratchet | 2-Speed Operation | Max. Drum Capacity - Cable (3) | Max. Drum Capacity - Strap |
|---|
| DL14881 (1) | 3,500 lb. | 1-5/16" | 12:1 / 6:1 | 9-1/2" | 135 | yes | yes | 3/8" x 37' | - |
(1) Hand brake standard equipment.(2) Capacity is based in direct pull on the third layer of line on the drum. Capacity is reduced as the line builds up on the drum.(3) Drum capacity based on cable size listed. (Cable is not included.) |
14881 Pulling Winch - 2 Speed Heavy Duty - 3,500 lb by Dutton-Lainson Model DL3500B
Winches are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
