- Used on Dexter 5,200 lbs and 6,000 lbs axles, or on spindles requiring a 2-1/8" or 2-1/4" I.D. Grease Seal
- Capacity: 2,600 lbs per each
- Drum Size: 12" x 2"
- Bolt Pattern: 6 on 5-1/2 (see information below)
- Bearings, cap and seal not included
- Bearings: 25580 inner / LM67048 outer
- Grease seal: 10-1 (single lip seal) or 10-10 (for double lip & e-z lube axles)
- Grease cap: 45896 (standard axles) or 21-1-1 (ez lube axles)
How to Measure Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number is the diameter of the circle the holes sit on. To determine the diameter on wheels with an even number of bolt holes, measure center-to-center on bolt holes directly across from each other on the circle (Example: 8 on 6-1/2 would mean 8 bolt holes with 6-1/2" center-to-center diameter). When the number of bolt holes is odd, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from it on the circle (Example: 5 on 4-1/2 would mean 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolts).
