Just got a hitch for my 2007 Honda CR-V and the install was very easy. The directions said it would be a 40 minute install but it only took about 30. You had to pull alot of plastic out in the cargo area to put the wiring harness on but it snapped right back in place. Jeremy, Waynesburg, PA
The Thule Cap Rack System is constructed of heavy-duty, fully welded, rust free, anodized aluminum. Thule's exclusive heavy-duty, tri-slot load bar system is included with the cap rack system to provide nearly limitless accessory flexibility. This means that you can save time and money, by quickly adding or removing the accessories you need to get the job done. The Thule Cap Rack System is ideal for all pickup designs with fiberglass and aluminum caps. It has a low-profile design with an articulating base that will mount to uneven roof lines. The ease of use, and wide range of available accessories on the Thule Cap Rack make getting your equipment and supplies on and off your truck as easy as possible, to save your valuable time and eliminate unneeded aggravation. The unique t-track design provides an aerodynamic profile to minimize wind noise, while the included rubber inserts protect your equipment and the rack from damage. Thule's Cap Rack System can carry up to 500 lbs. The 65" long tri-slot load bars and the 4" tall powder coated zinc die cast feet feature an easy one person installation. Also included with Thule's Cap Rack System are four powder coated aluminum load stops and four pivoting bases with rubber gaskets to prevent unwanted leaks. Thule's Cap Rack System is a great looking equipment hauling system for your truck and with the included Lifetime Warranty you can be sure it will last.
Heavy duty tri-slot load bars, for maximum capacity and versatility
Custom solution for fiberglass and aluminum caps
Low profile design with articulating base for mounting to uneven roof lines
Many accessories available
Aerodynamic design reduces wind noise
Easy, one person installation
Fully welded, anodized aluminum
Rust free
Holds up to 500 lbs.
Two 65" long load bars
Four 4" tall powder coated zinc die cast feet
Four powder coated aluminum load stops
Four pivoting bases, with rubber gaskets
Stainless steel and aluminum mounting hardware included
Thule Professional Ladder Lift System Thule's innovative ladder lift system is designed to help you load ladders without hurting your back or damaging your truck. Features easy to access side ladder loading at a load height of an unheard-of 40". Gas shocks power the function that will lift the ladder up which can handle the weight of your ladder, up to 100 lbs.
Thule Professional Ladder Tilt System With side loading access, Thule's ladder tilt system provides an easier way to load an extension ladder onto the roof of your vehicle. Constructed of rust-free aluminum, two tilting arm assemblies mount onto Thule load bars with a weight capacity of 100 lbs.
Thule Professional Ladder Rack Roller This roller by Thule Professional allows for unobstructed use of the top of the load bars, making loading long items easier merely by sliding it onto the rack.
Thule Professional Set of Two Quick Clamp Locking Ladder Holders Ladder holders eliminate the need to ever tie down a ladder again! This saves you time, money and aggravation, among other things. The holders accommodate any extension ladder as they quickly secure and lock the ladder to your truck or van rack.
Thule Professional Tilting Load Stop Ladder Rack Accessories - 2 Pack Thule's load stops are designed to tilt away while loading, then tilt back up to hold the items into place securely during transport. This accessory to the Thule Pro ladder racks tilts away so its there when you need it yet doesn't get in the way when you don't.
Thule Professional Load Stops (Ladder Rack Accessories) - 4 Pack Thule's adjustable load stops are designed to be set in the top of the ladder rack cross bars, which allows them to slide into any desired position. The load stops prevent loads from shifting around while in transit. This versatile accessory can also be used as an additional tie down point, if needed.
Thule Professional Ladder Rack Eye Bolt Thule's adjustable eye bolt can be easily integrated into any side of Thule's Tri-Slot Load Bar and quickly locks down wherever needed for use as a tie down point for your gear and also works as a divider.
Thule Professional Awning This roof rack accessory gives you excellent protection from weather conditions while also providing shade for both yourself and your equipment. Two height adjustable supports are made of durable aluminum as well as the weatherproof case that houses the retractable awning which provides approximately 50 square feet of covered work space.
Thule Professional Conduit Box Thule's great looking brushed stainless steel conduit box provides security when storing and transporting conduit, tubes, rods, pipes and other long items.
Thule Professional Ladder Rack 4" Conduit Kit Thule's ladder rack conduit kit contains everything you need to convert a 4" PVC pipe into a weatherproof, locking conduit case for transporting all types of tubes, pipes, and (of course) conduit on your vehicle's ladder rack.
Thule Professional Ladder Rack 6" Conduit Kit Thule's ladder rack conduit kit contains everything you need to convert a 6" PVC pipe into a weatherproof, locking conduit case for transporting all types of tubes, pipes, and (of course) conduit on your vehicle's ladder rack.
See Larger
Thule Professional Cap Ladder Rack System Installation - Video
Instructions
