Convert-A-Ball Cushioned Ball Mount Review - Video
Convert-A-Ball Cushioned, 6-way, rotatable ball mount
Aside from having all three ball sizes (1-7/8", 2" and 2-5/16") this product receives pintle rings, spades and clevis pins.
The Cushioned Ball Mount
- Acts as a shock absorber
- Protects the towing vehicle's driveline, hitch assembly and trailer contents
- Easy to install
- Proved effective in reducing bounce and rhythmic vibrations
- Designed for use with underframe receiver hitch with a 2" square socket
- Rated Class IV, V-5 Safe
Specs:
- Measures 3-1/2" from center of pin hole to closest edge of clevis hook
- Measures about 5-1/4" from center of hitch pin hole to closest edge of 2-5/16" hitch ball
- Measures about 5-1/2" from center of hitch pin hole to closest edge of 2" hitch ball
- Measures about 5-3/4" from center of hitch pin hole to closest edge of 1-7/8" hitch ball
- Measures 7-3/4" from center of hitch pin hole to end of ball mount (past the balls)
- Designed for 2" x 2" trailer hitches
- Includes pin for clevis and also pin and clip to hold into trailer hitch
Shanks are 2" x 2" tube with 1/4" wall thickness. Hitch pin hole receives a standard 5/8" hitch pin. Maximum trailer weight of 10,000 lbs. Maximum tongue weight of of 1,000 lbs.
Cutaway view of the shank showing the polyurethane cushions
6W Cushioned 3 Point Ball Mount with Clevis Hitch
Reliability
Performance
Ease Of Use
Installation
Cost-Benefit
Beware shank length
M from Maine
I ordered this ball mount to use with a Hidden Hitch receiver on my Toyota Tundra. In my case the shank length is too short to allow use without an extension. The balls or pintle hits the bumper before the retaining pin can be inserted. Otherwise it is a nice piece of equipment.
