1998.5-2002 Dodge 5.9L Jammer Fuel Injectors - Stage 5
Edge Products own line of high-output Jammer fuel injectors for Dodge Cummins light-duty engines are custom designed injectors that include new bodies as-well-as nozzles so there are no core charges. Jammer injectors are available in five configurations which add gains of 50-150 horsepower and 100-300 foot pounds of torque.
The following power gains are representative of a Dodge 5.9L Cummins equipped with the Jammer injectors:
- Stage 1: 50 horsepower - 100 foot pounds of torque
- Stage 2: 75 horsepower - 150 foot pounds of torque
- Stage 3: 100 horsepower - 200 foot pounds of torque
- Stage 4: 125 horsepower - 250 foot pounds of torque
- Stage 5: 150 horsepower - 300 foot pounds of torque
The process used to create these fuel injector nozzles intricately creates eight orifices in the injector tips. Compared to the stock seven-orifice injectors, Jammers achieve better fuel distribution with eight smaller orifices than seven larger ones. The increased number of orifices enables the injectors to deliver more fuel when required while maintaining mileage. The result is more power and improved combustion-chamber cleanliness. Across the board, Jammer injectors can also improve fuel economy by up to 1.5 MPG depending on individual driving style. Edge Products' machining process also matches flow rate to within 1 percent among fuel injectors, further enhancing engine performance - the stock injectors can vary as much as 11 percent per set.
WARNING! Stage 5 injectors are race-only products specifically designed for high-output. Installing them on a vehicle used for daily driving will result in poor drivability. In order to function properly, you should make modifications (such as a racing transmission or fuel system upgrade) prior to installing the injectors. Edge Products strongly recommends you seek advice from a qualified technician about necessary upgrades and make the modifications prior to installing these injectors or your vehicle may not run properly. Additionally, installation of injectors is a complex process that requires tools specific to injectors and should only be performed by a qualified mechanic.
- Race-only product specifically designed for high output
- 8 holes instead of 7 for better distribution of fuel means more power and better mileage
- Increases fuel economy
- Precision quality
- Old part number: #DI150
37105 - 1998.5-2002 Dodge 5.9L Jammer Fuel Injectors - Stage 5
See Larger