Anti-Rattle Device and Lock for 2" Trailer Hitches

| Product_Image | Alternate | Second_Alternate |  See Larger You may click image to recenter or drag in any direction to view additional detail Close	Quantity in Cart: None Code: 63232 Price: $22.95 Lowest Price Pledge Shipping Weight: 2 pounds Rating:  4 out of 5 This order ships for free. Additional items you add ship for free! Quantity:
No worries about leaving your bike rack on your vehicle when you secure it with this lock that also cuts down on rattle during transport. Locking Hitch Pin with Anti-Rattle Review - Video Trailer Hitch Lock and Anti-Rattle Device. Block with spring is placed inside the ball mount and drawn to the side of the hitch tube when the pin is tightened. This pushes the ball mount or hitch accessory up against the side of the hitch tube, dramatically reducing movement and vibration. A great alternative to the J-Pin and there is no need for a second hole. Fits 2" x 2" Trailer Hitches Pin diameter: 5/8" Overall Length: 6-1/8" Inside Width: 2-5/8" Acts as an anti-rattle device Requires ball mount or hitch accessory to have a hollow shank Wrench included Tow Ready # 63232 Replaces Valley # 76820 Customers who purchased this also ordered 63153 24x60 Railed Cargo Carrier for 2" Trailer 20174 Light Kit for Draw-Tite, Tow Ready, and Rola 7330 Cargo Carrier Stretch Net 988501 etrailer.com Extra Large Cargo Carrier Bag, 20 59502 23x56 Railed Cargo Carrier for 2" Trailer If you need help selecting a product or have questions, you can contact our Customer Service Team at 1-800-298-8924. Find more products like me in: Locks, Accessories and Adapters, 2" Accessories, 2" Hitch Locks, Anti-Rattles, Hidden Hitch Hitches, Valley Carriers Customer Ratings Based on 4 Ratings Reliability Performance Ease Of Use Installation Cost - Benefit Overall Rate This Item Reliability Performance Ease Of Use Installation Cost-Benefit This item is awesome! Erik from Juliustown, NJ The Anti-Rattle Device and Lock for 2" Trailer Hitches is great for use with cargo carriers. When using normal hitch locking pins, there's too much up & down, left to right movement for the cargo carriers. Using this anti rattle lock completely eliminates side to side movement, and greatly reduces the up and down movement. It helps a lot with reducing your cargo carriers from jumping up when you hit a bump. It's easy to install, the one thing that I stress is, when you're removing the anti rattle lock, REMEMBER to UNLOCK it before you untighten it. I untightened it before unlocking it, and by "over" untightening it, I damaged the internal lock and I was unable to unlock it. I eventually had to cut it off. Reliability Performance Ease Of Use Installation Cost-Benefit Good but could be better Tim R. from Buffalo Grove, IL This worked as advertised, with a couple of issues that could be fixed. It came with a star-type lockwasher that would have torn up the paint on my Receiver. I replaced with a copper washer and got no damage but it loosened twice on my trip (about 2000 miles). I can see a couple ways to stop it vibrating loose without using a star washer. The lock works well, but I would have preferred the cylinder to exit at 90 degrees from the pin, so you can crouch down and reach it. As it is, you have to crawl under the car to unlock it. The idea is great, and I would say it's worth what I paid, a couple improvements would make it much better. Haven't had long enough to commennt on Reliability. Reliability Performance Ease Of Use Installation Cost-Benefit Not so "anti rattle" Alan P from Raleigh, NC It's a nice lock, but I would not call it an anti-rattle device. It cuts down the rattle caused by side to side motion between the ball mount and receiver, but it does absolutely nothing for the vertical rattles. Reliability Performance Ease Of Use Installation Cost-Benefit Solid Ed C from OH Works great. Keeps the ball mount and bike rack nice and tight (and quiet!).

Questions, answers, and help information about this product?