Tow Ready T-One Vehicle Wiring Harness with 4-Pole Connector by Draw-Tite, Hidden Hitch and Reese
- Provides a 4-pole flat trailer connector for the vehicle
- Quick and easy
- No cutting, splicing or taping
- Just plug in the T-One connector and you're ready to tow
- Solid one piece construction
- 16 gauge bonded wire with 4-flat plug
- Factory appearance
- Connector is equipped with an upgraded circuit protected taillight converter
- Protects itself and the tow vehicle against harmful electrical shorts and mis-wire situations.
- Simple do-it-yourself instructions on every package
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection points are located behind the vehicle taillights. The 4-pole trailer connector will be stored in the rear cargo area of the vehicle when not in use.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: 1 per side (2.1 amps)
- Max. tail lights: (5.6 amps)
Read vehicle's owners manual and instruction sheet for additional information.