Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
- Provides a 4-pole flat trailer connector for the vehicle
- Quick and Easy
- No Cutting, Splicing or Taping
- Just Plug in the T-One Connector and You're Ready to Tow
- Solid One Piece Construction
- 16 Gauge Bonded Wire w/ 4-Flat Plug
- "Factory" Appearance
- Simple Do-It-Yourself Instructions on Every Package
- Connector Incorporates Circuit Protected Taillight Converter
- Protects itself and the tow vehicle against harmful electrical shorts and mis-wire situations.
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection points are located behind the taillights. 4-way trailer connector will be stowed under the vehicle. A mounting bracket is recommended.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: 1 per side (2.1 amps)
- Max. tail lights: (5 amps)
Read vehicle's owners manual and instruction sheet for additional information.
Replaces 18400
Reliability
Performance
Ease Of Use
Installation
Cost-Benefit
Fast and easy install
George C from Fl
The best easy install around.... only took 15 minutes and that time was mostly spent on taking the tail lights off and putting back on. Having some problems now after several years so might just buy another one!!
Instructions
