Wiring Harness Installation - 2006 Dodge Durango - VideoWiring Harness Installation - 2008 Chrysler Aspen - Video
Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
- Provides a 4-pole flat trailer connector for the vehicle
- Quick and Easy
- No Cutting, Splicing or Taping
- Just Plug in the T-One Connector and You're Ready to Tow
- Solid One Piece Construction
- 16 Gauge Bonded Wire w/ 4-Flat Plug
- "Factory" Appearance
- Connector is Equipped with a Circuit Protected Modulite
- Protects itself and the tow vehicle against harmful electrical shorts and mis-wire situations. Also draws power for the lights on the trailer directly from the vehicle battery instead of through the vehicle's wiring system.
- Simple Do-It-Yourself Instructions on Every Package
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection points are located behind the taillights. A wire must also be run to the battery. The 118390 draws the power for the trailer lights directly from the vehicle battery instead of through the vehicle wiring system bypassing expensive electrical components. The 4-pole trailer connector will be stowed under the vehicle close to the trailer hitch. A mounting bracket is recommended.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: 1 per side (2.1 amps)
- Max. tail lights: (4.2 amps)
Read vehicle's owners manual and instruction sheet for additional information.
Replaces # 18390
This is a custom fit application for the following vehicles.
Use the
HitchHunter(R) to find what fits.
2007 - 2010 Chrysler Aspen All Models
2004 - 2010 Dodge Durango All Models
Instructions
