The Edge EZ Module can be quickly installed to provide additonal horsepower and torque through easy power level adjustments
Edge Products EZ Module is an add-on Engine Control Module (ECM) for the Cummins 5.9L Engine that offers additional features not available on a stock engine. Since it is an "add on" ECM, it uses all the factory data, and then enhances the factory settings to optimize your truck's performance.
- Adds up to 65 Horsepower
- Adds up to 180 Foot Pounds of Torque
- Increases Fuel Economy
- Helps eliminate downshifting while towing
- Maximizes efficiency by monitoring the RPM, Timing, Turbo Boost Pressure, and Fueling Parameters
- Uses engine information to control and enhance timing and fueling
- Easy installation needs no mechanic labor, no drilling, and no computer downloads.
- Completely Weatherproof
Edge Products EZ Module
The Cummins motor is one of the most powerful motors ever put in a pickup truck. The Edge EZ module unleashes the potential of this monster by carefully monitoring RPM, timing, turbo boost pressure and fueling parameters and adjusting fueling and timing to maximize power, torque, and driveability.
The Power Edge EZ is a plug-in module that maximizes engine efficiency by monitoring the RPM, timing, turbo boost pressure and fueling parameters. The module uses this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. The re-mapping of the fueling and timing parameters is done via the CAN-BUS communication system. The CAN-BUS protocol is used to communicate between the Cummins Engine Control Module (ECM) and the Bosch fuel injection pump. All data sent from the EZ is within the limits of the Bosch fuel injection pump. This enables smooth and predictable power delivery without compromising integrity. This increase in power does not increase the exhaust smoke from a stock engine.
The Edge EZ allows maximum fueling at full turbo boost and provides an additional 65-rear wheel horsepower, an additional 180 foot pounds of torque and installs in minutes. Simply plug the EZ connectors into the ECM Data Link connection and MAP sensor. There’s no need to unplug the Bosch fuel injection pump connector, it is completely weatherproof and mounts easily under the hood.
The EZ can also be stacked with other upgrades to deliver even more power. There is not an upgrade on the market today that can deliver as much power and install so simply.
*Legal in California only for racing vehicles which may never be used upon a highway.
|
|
| Close-up pictures of the connectors that plug into the MAP sensor and Data Link Connection.
|
|
The included brass elbow permits turbo boost pressures of greater than 20 psi without the wastegate opening. The EZ module will operate equally well with or without this installed.
|
This is a custom fit application for the following vehicles.
Use the
HitchHunter(R) to find what fits.
2002 - 2002 Dodge Pickup, Ram, Full Size 5.9 Liter Cummins ISB
See Larger
Instructions
