The Edge Evolution Module can be quickly installed to provide more horsepower and torque with 3 separate performance programs
- Adds up to 100 Additional Horsepower and 200 Foot Pounds of Torque
- Available power levels:
- Level 1: 60 Horsepower - 100 Foot Pounds of Torque
- Level 2: 80 Horsepower - 140 Foot Pounds of Torque
- Level 3: 100 Horsepower - 200 Foot Pounds of Torque
- Ability to remove speed and rev limiters
- Improves driveabilty and performance
- Displays 0-60 and quarter mile times
- Displays and can clear trouble codes
- Displays description of trouble codes to eliminate finding a manual to look them up
- Connects to OBDII port under dash
- Downloads stock software from truck and replaces it with Evolution program. Stock software may be reinstalled on truck at any time
The Edge Evolution will improve driveability and deliver massive horsepower and torque gains. It also has the ability to display and clear trouble codes and adjust the speed and rev limiters. Incredibly, the Edge Evolution is the first programmer to keep on working once the ECU is flashed. By leaving the Edge Evolution attached, it will provide 0-60 and quarter mile times as well as display key parameters such as transmission temperature, RPM, oil temp and exhaust backpressure.
The Edge Evolution automatically makes a backup of your stock program before proceeding to add a new program. This assures that you will have the stock program if/when you desire to reprogram your vehicle to its original stock program.
The Edge Evolution is also a powerful diagnostics tool. Not only can you view trouble codes your vehicle may be displaying - which in turn allows you to fix them, but yoiu can turn off that annoying "Check Engine" light when the problem has been addressed. No more trips to the dealer for a diagnostics scan.
The Edge Evolution's small, lightweight design allows personalized control with the touch of a button. With a backlit LCD screen, seeing and reading codes is now a simple process. The unit not only displays codes, but also displays a description of what these codes mean, which eliminates copying the code down and then finding a manual to look them up.
With the introduction of the Evolution, Edge has entered a new realm of the aftermarket diesel industry. Contained in this tiny module is the capability not only to improve driveability and performance, but also the ability to display and clear trouble codes, remove the speed and rev limiters and adjust power levels.
The Evolution connects directly into the OBDII port underneath the dash. Once connected the stock software is downloaded and the new Evolution software is uploaded onto the trucks ECM. All modifications are done during this process and can be just as easily be switched back to stock at any time.
The Evolution was created with a small lightweight design that allows personalized control with the touch of a button. With a backlit LCD screen, seeing and reading codes has been made simple. The unit not only displays codes, but also displays a description of what these codes mean, which eliminates copying the code down and then finding a manual to look them up.
*Legal in California only for racing vehicles which may never be used upon a highway.
| Horsepower and Torque Gains
|
|
|
|
This is a custom fit application for the following vehicles.
Use the
HitchHunter(R) to find what fits.
1994 - 1996 Ford F-250 and F-350 7.3 Liter Powerstroke
1997 - 1997 Ford F-250 and F-350 Heavy Duty 7.3 Liter Powerstroke
1999 - 2003 Ford F-250 and F-350 Super Duty 7.3 Liter Powerstroke
Instructions
