Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
- Provides a 4-pole flat trailer connector for the vehicle
- Quick and Easy
- No Cutting, Splicing or Taping
- Just Plug in the T-One Connector and You're Ready to Tow
- Solid One Piece Construction
- 16 Gauge Bonded Wire w/ 4-Flat Plug
- "Factory" Appearance
- Simple Do-It-Yourself Instructions on Every Package
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection points are located behind the vehicle tail lights. Wiring harness will remain in cargo area for storage when this connector is installed on minivans. With Dodge Durangos, the 4-pole trailer connector will be stowed underneath the vehicle near the bumper.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: 1 per side (2.1 amps)
- Max. tail lights: (4.2 amps)
Read vehicle's owners manual and instruction sheet for additional information.
Replaces # 18334
This is a custom fit application for the following vehicles.
Use the
HitchHunter(R) to find what fits.
1996 - 2000 Chrysler Town and Country All, Including 4 WD
1996 - 2000 Dodge Caravan All, Including 4 WD
1998 - 2003 Dodge Durango
1996 - 2000 Dodge Grand Caravan All, Including 4 WD
1996 - 2000 Plymouth Grand Voyager Mini Van All, Including 4 WD
1996 - 2000 Plymouth Voyager Mini Van All, Including 4 WD
See Larger
Instructions