Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
- Provides a 4-pole flat trailer connector for the vehicle
- Quick and Easy
- No Cutting, Splicing or Taping
- Just Plug in the T-One Connector and You're Ready to Tow
- Solid One Piece Construction
- 16 Gauge Bonded Wire w/ 4-Flat Plug
- "Factory" Appearance
- Simple Do-It-Yourself Instructions on Every Package
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection point is located under the vehicle on the passenger side. The 4 pole trailer connector will be stowed close to the trailer hitch. A mounting bracket is recommended.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: (7.5 amps)
- Max. tail lights: (7.5 amps)
Read vehicle's owners manual and instruction sheet for additional information.
|
| Picture of the T-one Connector installed. The connection for 118328 on Full-Size Dodge Vans (1993-98) is normally on the passenger side of the vehicle right behind the bumper.
|
Instructions