Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
- Provides a 4-pole flat trailer connector for the vehicle
- Quick and Easy
- No Cutting, Splicing or Taping
- Just Plug in the T-One Connector and You're Ready to Tow
- Solid One Piece Construction
- 16 Gauge Bonded Wire w/ 4-Flat Plug
- "Factory" Appearance
- Simple Do-It-Yourself Instructions on Every Package
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection point is located along the inside of the left rear frame rail. The 4-pole trailer connector will be stowed under the vehicle close to the trailer hitch. A mounting bracket is recommended.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: (7.5 amps)
- Max. tail lights: (7.5 amps)
Read vehicle's owners manual and instruction sheet for additional information.
This is a custom fit application for the following vehicles.
Use the
HitchHunter(R) to find what fits.
1987 - 1991 Ford F-100, F-150, F-250, F-350
1987 - 1991 Ford F-100, F-150, F-250, F-350 Except Deep Drop Bumper
1987 - 1991 Ford F-100, F-150, F-250, F-350 with Deep Drop Bumper
1992 - 1996 Ford F-150 Except Deep Drop Bumper
1992 - 1996 Ford F-150 with Deep Drop Bumper
1992 - 1996 Ford F-250 and F-350 Except Deep Drop Bumper
1992 - 1996 Ford F-250 and F-350 with Deep Drop Bumper
1997 - 1997 Ford F-250 and F-350 Heavy Duty
1997 - 1997 Ford F-250 and F-350 Heavy Duty with Deep Drop Bumper
1993 - 1995 Ford Lightning Pickup
Reliability
Performance
Ease Of Use
Installation
Cost-Benefit
super easy
worker from olympia WA
great item, makes the electrical a 5 min job.
Instructions