Cushioned Trailer Hitch Mounted Pintle Mount by Convert-A-Ball
- Bar has 10 holes to mount pintle
- Mount plate measures 8-3/4" tall x 5" wide
The Cushioned Ball Mount
- Acts as a shock absorber
- Protects the towing vehicle's driveline, hitch assembly and trailer contents
- Installs easily
- Proved effective in reducing bounce and rhythmic vibrations
- Intended for use with underframe receiver hitch with a 2" square socket
- Measures 5-1/2" from the center of the hitch pin hole to the back of the plate
- Measures 3-1/4" from the center of the hitch pin hole to the beginning of the support bracket
- Rated Class IV, V-5 safe
Shanks are 2" x 2" tube with 1/4" wall thickness. Shank hole is 1" diameter. Hitch pin hole receives a standard hitch pin (not included). Maximum trailer weight of 10,000 lbs. Maximum tongue weight of of 2,000 lbs.
Rated Class IV. Rated V-5. Meets SAE Standard J-684.
Be sure that the hitch bar receiver tube is more than 2-3/8" deep if the tube has a closed end.
|
Cutaway view of the shank showing the polyurethane cushions
|
