Features:
- Advanced technology
- Inertia accelerometer instantly activates brake
- Proportional controller mirrors the braking action of the tow vehicle
- On-the-fly sensitivity adjustment - 5 "boost" levels
- Easy to install and use
- Full digital settings with large readout screen
- Displays power as a percentage (from 5% to 99%)
- Flexible mounting options - self-leveling
- Short proof protected
- Innovative push button for manual braking
Specs:
- Dimensions: 1-1/4" thick x 5" long x 3" wide
- Made for up to 3-axle trailer brake systems (6 brakes)
- Operating range: -20 degrees to +70 degrees
- Unit must be pointed in the direction of travel
- 5 Digital sensitivity settings for different loads and driving conditions
- Pigtail wire leads
- Limited lifetime warranty
Towing large trailers hinders your ability to stop quickly. Protect the investment you made in your trailer and vehicle with the Agility trailer brake control.
The Agility is a proportional brake controller, meaning the trailer decelerates at the same rate as the vehicle. This not only makes for the smoothest of stops but also the most efficient. If both truck and trailer are stopping at the same rate then the truck (or the trailer) brakes are not getting over worked and will therefore last longer. Brakes will also not be overheated after driving through traffic no power will be sent to the trailer brakes when the rig is stopped.
The Agility is designed for use with electric trailer brakes. It is not designed to operate with electric-hydraulic brake systems.
47295 Hopkins Brake Controller
Instructions
