bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24812
Retail:$313.85
Our Price: $151.47
You Save: $162.38
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 21 lbs
Add to cart
In Stock
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" Visible Cross Tube 24812
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
Draw-Tite trailer hitch for your 2006 Toyota Matrix are available from etrailer.com. Installation instructions and reviews for your Toyota trailer hitch. Expert service, and great trailer hitch prices. etrailer.com carries a complete line of Draw-Tite products. Order your Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24812 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (196)
  • Q & A (0)
  • Photos

2006 Toyota Matrix - Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

  • Class I
  • 1-1/4 Inch Hitch
  • 2000
  • Visible Cross Tube
  • Draw-Tite
  • 200
  • Custom Fit Hitch

This fully welded, corrosion-resistant trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24812 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60898 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24812 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
2,000 lbs.

Tongue Weight (TW):
200 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

Center fascia will need to be removed on XR and XRS models. No drilling required for installation




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24812

Average Customer Rating:  4.8 out of 5 stars   (196 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:
2005 BMW X3

Again, never question the internet, I have a 2005 Matrix RS, so the age of the car should of told me to buy a tap to tap the frame rails, I didn't buy one and had to wait a week to install because you cant get that M12 x 1.25 tap locally. Other than that it all went very well. The 24812 does make you trim the fascia a bit and the other places too. But I prefer that because the hitch is off the ground more. From the install instructions (Note: Toyota Matrix XRS & XR Sport models have added center fascia that must be removed for hitch installation) Heather at etrailer is the best, I ordered 3 of these by mistake and she cleared it up and got me a discount to boot. Thanks Heather. I will be coming back to etrailer for my X3 hitch, little bit bigger job. I included a picture and that scratch on my bumper was already there.
Thanks to my Daughter!!!



by:
2009 Pontiac Vibe

Here are the pictures of the hitch just installed this morning on our 2009 Pontiac Vibe. The hitch was very easy to install and we're very satisfied with the quality. Even at 80 years of age, I was able to do the majority of the wiring myself, but did have my step-son do the last wire that had to go underneath and up to the battery. He also bolted on the hitch. He is a mechanic by trade and was impressed with the ease with which the hitch fit and bolted up. All in all, I am very pleased with this purchase and will recommend your company to others.



by:
2003 Toyota Matrix

I recently decided to buy a trailer hitch for my 2003 Toyota Matrix XR. After searching everywhere, and a million phone calls, I finally found exactly what I was looking for on etrailer.com. I found the customer service to be some of the best I have ever dealt with. I was even contacted personally by Cathy T to help answer some questions I had about my purchase. I received my order in about a week. The installation required very little mechanical knowledge. had to tap the rusty bolt holes in the frame of my car, but after that it was very simple to install. Along with the plug and play wiring harness I ordered, the total installation time took well under an hour, and I was literally towing my trailer home an hour later. Id highly recommend etrailer for the quality of product for the price, and the excellent customer service.



by:

This is the second e-trailer hitch that I have purchase and installed. Hitch came with all required parts and was installed in about two hours. Expanded time on install was caused by the piece that had to be removed prior to install. Hitch itself took about 1/2 hour to install. Complete instruction were included as to how to install. Love these products. With minor modification put the center back on.



by:

Took a few days to ship after confirmation. Arrived with paint chipped off and scratched up. Must have been from previous shipping, etrailer box was in great condition. etrailer.com sticker was put on upsidedown. Other than a little touch up, product is serving it's purpose.

Etrailer Expert

Sierra K.

5/9/2022

Customer Service will reach out to you.



by:
2007 Pontiac Vibe

Great product and price. It took awile to install as the car was nine years old and the welded in nuts were a little corroded and filled with road dirt. Once cleaned out the hitch installed in just a few minutes. I could not be happier with the finished product unless the receiver could have been a 2" model to fit my bike rack. A 1 1/4 to 2" receiver was purchased after market.



by:
2007 Toyota Matrix

Very easy to install. The only "specialty" tool need is a torque wrench.92 lb ft for all six. But only one down side. The mount for the hitch contacts the bumper (shown in photos). But I can trim the pices of bumper off that it touches. Only reason it not five stars. Going on vacation soon and wanted to bring the bikes along.



by:
2003 Pontiac Vibe

Very easy installation on my 2003 Vibe GT. Actual installation was less than 30 min, I spend more time collecting my tools and getting the car up onto the ramps than I did installing the hitch. My southern vehicle did not have any corrosion issues with the bolt holes, 30 sec on each with a wire brush in my drill cleaned them out just fine. The receiver sticks out a bit farther under the bumper than I would have liked, but it does not cause any problems for me.



by:
2006 Toyota Matrix

Easier to install than I though 2006 Toyota Matrix XR.
Didn't have to jack it up to install.
Also installed the T-One wiring harness only tool needed is a drill with a Philips #2 for the ground wire

Had to remove the lower trim in the back but it looks like it won't be missed. bolts for it are 10mm.



by:
2006 Ford Focus

I have bought 2 tow bars from etrailer.com, one for my 2006 Ford Focus from like 5 years ago, and another for my 2004 Pontiac Vibe this past fall. Both arrived on time and were super simple to install. I had trouble installing my Pontiac Vibe tow bar, but that was because the mounting holes on my car were a bit rusted over. I called customer support who walked me through cleaning those out, and I got it installed right away then. Their wiring harnesses are also super easy to install and the directions are clear and concise. I highly recommend etrailer.com for any towing bar and wire harness needs. I now can tow my sailboat wherever I want to go!



by:
2007 Pontiac Vibe

The only issue we had was 16 years of rust in the threads on the car. Once the threads were cleaned with a tap the hitch easily bolted on in a few minutes.



by:
2010 Pontiac Vibe

Installation took less than 10 minutes thanks to the 2007 Vibe having pre-drilled and threaded holes for the hitch.



by:
Pontiac Vibe

I needed a trailer hitch for my vibe.
You
had one.
You sent it to me quickly.
It looks good.



by:
2010 Pontiac Vibe

I purchased a hitch and wire harness for my 2010 Pontiac Vibe from your company and couldn't be more delighted with the product and easy installation.
I'm 64 years old and had no problems at all.( I did view the installation video ) I believe I spend more time running the power from the battery than the hitch or harness.
Everything works great and because of the harness plugs ( not crimp on connectors ) I expect no future problems.
In this world, It's not to often the advertising matches the product.
Your company is the exception!!! Keep up the good work.
Great products and honest representation. Thank you!!!!

Tom

3/19/2015

thevideo wasEXCELLENT



by:

I ordered my trailer hitch on Sunday and it was delivered on Thursday. After cleaning the rust out of the mounting holes on the frame rails I installed the hitch. Installation took only fifteen minutes. My first time dealing with etrailer.com. It will not be my last. Very satisfied.

Chuck J.

10/17/2017

just a trailer hitch. Does what it was designed to do. Still working fine. Thanks for checking.



by:
2003 Toyota Matrix

2003 Matrix XR The hitch was delivered quickly and it installed easily as described. I had to tap the weld nuts on the frame prior to installation.

The edges of the hitch push slightly on the molded plastic fascia of the bumper but no trimming of the bumper was required.

Looking forward to getting a hitch-mounted bike rack!

Rey

11/21/2012

Im planning to buy one to I got xrs what kind you got its ok not to trim spoiler thx

Patrick B.

11/26/2012

We have sent an email to the original reviewer. If he has anything to add, he can come back and follow up.

Steve H.

11/28/2012

Rey: i have an XR. i think with the extra trim on the XRS you might have to cut the plastic - I cant be sure but I think so.cheers

Patrick B.

11/28/2012

Thanks for the info!


by:
2008 Pontiac Vibe

The product arrived as expected and in good condition. The kit takes 15 minutes to put on once you have the weld nuts cleaned out. WD-40 and a wire brush were not sufficient to clean out the weld nuts. I bought a M12 x 1.25 tap. I ran this through each nut once and it allowed for easy threading of the bolts. It would be nice if the tap was included with the hardware or offered as an option to buy. Unless the car is brand new, the tap is what is needed to make this a quick and stress free install. Despite having metric and English tap sets I had to special order this not so common tap to do the job.

Matt M.

8/14/2017

Still working fine. No issues



by:
2003 Toyota Matrix

If your car isn't brand new I highly suggest getting an M12 1.25" tap, without it I would never have been able to put the bolts in. They were far too rusted and filled with gunk.

Otherwise the product itself works as it should and is a pretty good deal.

For etrailer.com I would just include an M12 1.25 tap as most people have brought this same issue up. Up the price a couple bucks and you can break even on it.

Victor A.

6/9/2017

So far so good, after one year of use everything seems to be working perfectly fine.



by:
2004 Pontiac Vibe

Unbelievably Fantastic! Ordered Sun at 2pm, order shipped at 4:32pm, delivered Wed 2:02pm, installed by 4pm.

And it also contained the correct grade 8 washers, unlike the other hitch I ordered thru another site for our other SUZ.

FANTASTIC service! Great job!

Mark

11/23/2018

Working great!!! No problems at all!



by:
2004 Toyota Matrix

Installation was fairly easy. The hitch will fit the XR model after removing the rear spoiler. Hitch fit correctly but came with bolts that were one size too large. I would have left the Draw Tight and etrailer stickers on the hitch but they were put on crooked so I peeled them both off. Overall good product and great experience with etrailer.

Etrailer Expert

Mike L.

6/20/2019

Rather than sending the wrong hardware, what typically happens is that the nuts welded into the frame members get clogged up with road debris and corrosion, which makes the installation hardware difficult to install. The hitch should have arrived with M12x1.25x40mm bolts. If the threads were severely corroded, a thread tap is recommended to clean them. Id urge you to confirm that youve used the correctly sized hardware.



by:
2004 Toyota Matrix

It went on without a hitch (see what I did there). Seriously! Four bolts and run the wiring where it belongs. I did it at night with a headlamp and it worked flawlessly. A year later, it’s still tight and the wiring is solid. Thank you for a seamless and painless experience!

Bobby

4/15/2019

Still works perfectly 2 years out!



by:

We needed to add a trailer hitch to our little car for a bike rack. This was exactly what we needed at a good price. Thank you!



by:

Awesome product, very durable and easy install. I have been using it primarily for a bike rack and could not be happier. The only visible part of the hitch is the receiver itself. Does not impact ground clearance much at all like other hitches.

If your car is older, you will definitely want to run the bolts into the holes before trying to install the hitch to make sure your threads aren’t rusted. In my case, I needed to purchase a thread tap to allow the bolts to easily screw in. This was a simple process and only took about 20 minutes.



by:

fit perfectly. also had ball hitch and trailer light hook-up for my vehicle. Shipped quickly, no damage.

I did have a local shop install this, but would not have been necessary if it had been a new vehicle. The slight re-positioning of the older exhaust broke a part of the exhaust.

The local shop that did the installation thought these were better and a better deal than what THEY had initially considered.

This hitch and receiver has hauled my 12' Jon boat dozens of times for great fishing fun. THANKS for a good, quality product.



by:

Easy to install and worked perfectly!


25
196
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Do I need to cut 2009 Toyota Matrix rear fascia with Hidden Hitch Class #60898?
    No, you will not. Draw-Tite Class I Trailer Hitch Receiver, part # 24812, is the correct hitch for your 2009 Toyota Matrix. It fits all models including those with rear fascia, and does not require cutting of the fascia. Hidden Hitch Class I Trailer Hitch W/ Drawbar, part # 60965, fits only 2003-2008 Toyota Matrix models, so this would not work for your vehicle. This part is no longer available.
    view full answer...
  • Crosstube Dimensions on the Draw Tite Hitch 24812
    The crostube on the Draw Tite hitch part # 24812 measures 1-1/2 inches tall and 1-1/2 inches wide.
    view full answer...
    Image 1 for
  • Does Draw Tite Hitch part # 24812 Fit a 2003 Toyota Matrix XR
    The Draw Tite Hitch part # 24812 that you referenced is a confirmed fit for your 2003 Toyota Matrix XR. The fit notes are a bit confusing, but the hitch fits the XR and non-XR models. The center fascia of the vehicle would need to be removed to install this hitch on the XR models.
    view full answer...
  • Trailer Hitch Recommendation for 2006 Toyota Matrix
    All of the hitches for the 2006 Toyota Matrix XR are going to have about the same ground clearance. The best one in my opinion though is the Draw Tite part # 24812 as it does not require a stabilizer strap when carrying a non-supported load like a bike rack like the Curt hitch does. Since this hitch requires total removal of the rear fascia on the XR models that means the hitch would sit up the highest of the ones available.
    view full answer...
  • Will Installation of Draw-Tite Hitch on 2006 Toyota Matrix XR Require Trimming the Bumper?
    All of the required hardware comes with the Draw-Tite Sportframe # 24812; no additional fastener or bolt kit will be necessary to install it on your 2006 Toyota Matrix. As for the bumper you do have the right idea. Only the XRS and XR Sport will require removal of some of the fascia because of the design of those models. I've added a link to a video showing an install on a 2009 Matrix to give you an idea of the process.
    view full answer...
  • Is Hardware Included with Draw-Tite Hitch 24812?
    Yes, all the necessary hardware and instructions are included with all of our hitches.
    view full answer...
  • Hitch and Ball Mount Compatibility on 2010 Pontiac Vibe
    Your 2010 Pontiac Vibe can be fitted with either of two hitch classes, either a light-duty 1-1/4-inch Class I hitch or a higher-capacity Class II type (also 1-1/4-inch size) depending on the version of the Vibe you have. For reference the hitches we offer for your Vibe are linked at right. It sounds like you have a Class I hitch and a non-compatible Class II ball mount. Some Class I hitches have a stop inside the tube to prevent use of ball mounts that are not rated Class I. We do not...
    view full answer...
  • Is Fascia Trimming Required to Install Draw-Tite Class I Receiver on 2010 Toyota Matrix S
    According to my contacts at Draw-Tite, no fascia trimming or other modification is necessary for installing the Class I Receiver, part # 24812 on your 2010 Matrix S. On the XR and XRS models, trimming would be needed. To see the installation details, click on the provided link.
    view full answer...
  • Trailer is not Level When Towing with Recommended Drawbar
    The instructions (see link below) state that the drawbar must be used in the rise position only, for your Pontiac Vibe. Drawbar 3593 has a rise of 2-1/8 inches, and only the drawbar recommended for a Class I hitch should be used. The manufacturer tests for crash safety on Class I and Class II hitches and their recommendation should be followed. If your drawbar is in the correct position and the trailer is still not level you may need to haul that particular trailer with another vehicle....
    view full answer...
  • Bolt Sizes for a 2006 Toyota Matrix Trailer Hitch 24812
    All of the hitches available to fit your vehicle are Class I hitches. The most common hitch, 24812, was one which fits with or without the rear fascia. The bolts for that hitch are M12 x 1.25 x 40mm. We offer replacement hardware kits part number RHK. I have included a link to the most popular hitch for you 2006 Matrix and to our hardware kits.
    view full answer...
  • What Draw Bar Fits Draw-Tite Class I Hitch Part # 24812
    The Draw-Tite Class I hitch you were looking at, part # 24812 uses a 1-1/4 inch receiver. A class I hitch usually has a stop welded into the receiver tube or a detent punched into it to prevent a class II accessory from being used. If the draw bars you have were intended to be used in a class I hitch, they will work. Keep in mind, Draw-Tite recommends only using the part # 3593 draw bar. If the draw bars that you have measure any longer than 1-1/2 inches from the center of the pin hole...
    view full answer...
  • How to Get Replacement Installation Hardware for a Hitch for a 2003 Pontiac Vibe
    If you can determine the brand and part number of the hitch we can sell you everything you need to install it on your 2003 Pontiac Vibe. With that information you would need to go to the product page of the Replacement Hardware Kit part # RHK, enter the part number in the box, and then select your hitch brand and we will ship you out the correct hardware kit.
    view full answer...
  • My Draw Bar Will Not Fit All the Way Inside My Draw-Tite Hitch 24812 on my Pontiac Vibe
    The stop inside the hitch is not to force customers to purchase certain brand products, but to ensure that a Class II draw bar is not inserted into a Class I hitch. The Draw-Tite hitch you have, part # 24812, is a Class I hitch so if the welded stop inside is preventing the draw bar from going all the way in, you have a Class II drawbar. The recommended draw bar for this particular hitch is part # 3593. This draw bar will fit your hitch and will be at the proper height for trailers that...
    view full answer...
  • Replacement Hitch Installation Hardware for Draw-Tite # 24812 on 2006 Toyota Matrix
    You'd need the Replacement Hardware Kit, part # RHK. Use the provided link, and on the product page, type in # 24812 as the part number and Draw-Tite as the hitch manufacturer. You can see the install details for the Draw-Tite # 24812 by clicking the provided link.
    view full answer...
    Image 1 for
  • Will the Swagman XC2 Wheel Mount Bike Rack # S64650 Fit in Class I Hitch on a 2004 Toyota Matrix XR
    The Swagman XC2 Wheel Mount Bike Rack, item # S64650, does work with Class I hitches. You can rest assured because the 2009 Ford Focus that is pictured with this rack installed is one of my good friends vehicle and it works great on his car. We installed the Class I hitch on his vehicle which is the only size avalable for the Focus at this time. I checked the manufacturer instructions (see link) and see no mention of the rack not fitting in a Class I hitch. If you need a hitch for your...
    view full answer...
  • Recommended Trailer Hitch Receiver for 2009 Toyota Matrix Type S Carrying a Bike Rack
    For your 2009 Toyota Matrix Type S I recommend the Curt Trailer Hitch Receiver # C12228. This is a Class II hitch with a 1-1/4" receiver. It has a maximum tongue weight of 250 lbs to handle your bike rack. This hitch has a gloss black powder coat finish and a limited lifetime warranty. I would choose this hitch over the Draw-Tite # 24812 because of the higher tongue weight capacity. This means it can handle more weight from your bikes. It also does not have the same two bike restriction...
    view full answer...
  • Difference in Class I and Class II Ball Mounts and Can They Interchange
    The correct ball mount or draw bar for the Hidden Hitch Class I 1-1/4 Inch Hitch, part # 24812, on your 2010 Toyota Matrix will be Draw-Tite Ball Mount, part # 3593. When towing with a Class I or Class II trailer hitch, the ball mount that is recommended by the hitch manufacturer should be used. All Class I and Class II trailer hitches are tested and rated with the specific ball mount for that hitch. Using a ball mount that is not recommended by the manufacturer will void the warranty. A...
    view full answer...
  • Do Bolts Need to Be Fished Into The Frame To Install Draw-Tite 24812 Hitch on 2009 Pontiac Vibe
    You won't need to fish any fasteners into the vehicle frame to install the Draw-Tite # 24812 Class I hitch on a 2009 Pontiac Vibe. The vehicle frame member has nuts already welded into place to accept the 6 M12 x 1.25 installation bolts, so the install is pretty simple. If you live in a portion of the country where snow and ice melting chemicals are used on the pavement during the winter, you could have some road crud and corrosion built up in the nuts welded to the frame. If that's the...
    view full answer...
  • Hitch and Bike Rack Recommendation for a 2003 Pontiac Vibe
    2 inch hitches are only used on larger vehicles like trucks and SUVs that have higher towing capacities. For your 2003 Pontiac Vibe you would have to go with a 1-1/4 inch hitch like the part # 24812 and a bike rack compatible with a Class I hitch like this. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I...
    view full answer...
  • Will Hitch that Fits 2005 Toyota Matrix Also Fit 2009 Matrix
    Yes hitches like the Draw Tite part # 24812 fit both a 2005 Toyota Matrix and a 2009 Matrix.
    view full answer...
  • Size and Thread Pitch of Attachment Bolt for Draw-Tite Class I # 24812 for 2004 Pontiac Vibe
    The Draw-Tite Class I # 24812 hitch attaches to nuts welded into the frame of the vehicle using M12 X 40mm bolts which have a 1.25 thread pitch. If the weld nuts in your frame are corroded or clogged up with road grime, before resorting to chasing them with a tap, you can try cleaning them using some spray lubricant like WD-40 and a wire brush like the one on a battery terminal cleaner # DW00254.
    view full answer...
  • Adapting 1-1/4 Receiver Tube For 2 Hitch Accessories - 2004 Pontiac Vibe
    Yes, it is possible, with certain exceptions. The Tow Ready adapter # 80303 should help you in most instances. The hitch I recommend is the Draw-Tite # 24812 Class II. Please bear in mind, even if you adapt a 1-1/4" tube to fit 2" accessories, there are still limitations that will apply. Using the adapter will reduce the weight capacity of the hitch by 50% in terms of both tongue weight and gross trailer weight. In this instance, the Class II hitch that fits your Vibe will be limited to...
    view full answer...
  • Hitch and Kuat Beta Bike Rack Recommendation for a 2007 Toyota Matrix
    Yes, the Kuat Beta Bike Rack part # B202-114 will install in the Class I Draw-Tite part # 24812 that you have on your 2007 Toyota Matrix. This rack is Class I compatible and will slide all the way into the opening of your hitch so that the pin hole would line up so that you could pin it in the hitch. I attached a review video for the rack for you to check out also.
    view full answer...
  • Hitch and Platform Bike Rack Recommendation for a 2003 Toyota Matrix
    The Yakima StickUp is a now discontinued bike rack that can only fit Class II and up hitches. The hitch part # 24812 that you referenced is a Class I hitch so while it would fit your 2003 Toyota Matrix it would not work with the StickUp. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info.
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee DeAnne T
Expert Research:
DeAnne T
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Lori W
Expert Research:
Lori W
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Lindsey S
Written by:
Lindsey S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924