Tow Ready Circuit Protected Taillight Converter with 4-Flat End by Draw-Tite, Hidden Hitch and Reese
Adapts import and domestic vehicles with separate turn and stop lights (3-Wire System) to standard trailer taillight wiring (2-Wire System). In a three wire system, a separate wire is used to carry each of the stop, turn, and running light functions to the taillight assembly. On most trailers, the stop and turn signal functions are sent through the same wire.
Features:
- Short circuit protection safeguards itself and the tow vehicle against harmful electrical shorts and mis-wire situations
- Circuit automatically resets once the module cools
- Adapts a 3 wire system on the towing vehicle to a 2 wire system on the trailer
- Will not work on vehicles with LED taillights
- Works with most vehicle with multiplex wiring system for lighting
- Includes circuit tester and (5) scotch locks to aid in installation.
- Also includes 4-pole trailer connector cover and LED test lights.
Specs:
- Wire pigtails measure 18" long
- 4-pole trailer connector is 60" long from converter box
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: 1 per side (2.1 amps)
- Max. tail lights: (7.5 amps)
Read vehicle's owners manual and instruction sheet for additional information.
Kit Includes:
- Circuit protected tail light converter (119175)
- Circuit tester
- To help find wires behind vehicle taillights
- (5) Scotch Locks
- Makes tapping into wires quick and easy
- LED 4 Pole Cover with Tester
- Protects 4-pole trailer connector from the elements and lets you know everything is working properly
119175KIT Circuit Protected Taillight Converter with 4-Flat End, Circuit Testers and Scotch Locks
See Larger
