Tow Ready Circuit Protected ModuLite Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
Features:
- Short circuit protection safeguards itself and the tow vehicle against harmful electrical shorts and mis-wire situations
- Virtually eliminates draw on the vehicle's taillight circuit
- Taillight circuit has been upgraded to work with vehicles using Pulse Width Modulation (PWM), allowing converter to fully turn on, giving trailer lights full brightness during activation
- Powers the trailer's stop, turn, tail and running lights directly from the tow vehicle's battery
- Unit prevents feedback from trailer to vehicle system
- May be used on 2 and 3 wire systems
- When used on 2 wire systems, brake wire on harness must be grounded
- Adapts a 3 wire system on the towing vehicle to a 2 wire system on the trailer
- Will work on vehicles and trailers with either LED, incandescent, or standard bulb taillights
- Works with most vehicles multiplex wiring systems for lighting
- Optional install kit available to help run wire to vehicle battery - 118151
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: 1 per side (2.1 amps)
- Max. tail lights: (5.6 amps)
Read vehicle's owners manual and instruction sheet for additional information.
119176 ModuLite Protector with Circuit Protection
See Larger
Instructions