I received my hitch and installed it in about a half hour.
I have been towing this and that for almost 40 years. I've bought about every manafacturers product, and when one was not available, I've made some pretty nice ones myself.
The Hidden Hitch that you sent me for my Honda Element was beautiful in its simplicity and design.
assuming that it is going to do its job (that is: stay on the car, and not damage it) I send you my compliments! NICE JOB! Really good looking , nice and tight under the bumper, easiest install ever, very slick plastic cover for the receiver. You guys (and gals?) did a really good job...thanks! Bob, Yorktown Heights, NY
Adapts import and domestic vehicles with separate turn and stop lights (3-Wire System) to standard trailer taillight wiring (2-Wire System).
In a three wire system, a separate wire is used to carry each of the stop, turn, and running light functions to the taillight assembly. On most trailers, the stop and turn signal functions are sent through the same wire.
Features:
Short circuit protection safeguards itself and the tow vehicle against harmful electrical shorts and mis-wire situations.
Adapts a 3 wire system on the towing vehicle to a 2 wire system on the trailer.
Includes circuit tester and (5) scotch locks to aid in installation.
Also includes 4-pole trailer connector cover with LED test lights.
Specs:
Wire pigtails measure 18" long
4-pole trailer connector is 60" long from converter box
Will work on vehicles with LED taillights
Warning:
Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
Max. stop/turn light: 1 per side (2.1 amps)
Max. tail lights: (5 amps)
Read vehicle's owners manual and instruction sheet for additional information.
See Larger
Wiring Harness Installation - 2007 Chevy Aveo - Video
