Valley Odyssey II Inertia Activated Electric Trailer Brake Controller
The new double-axis accelerometer technology continually checks and then
adjusts for varying road terrain. The brake controller also senses the
vehicles rate of deceleration and applies a proportionate amount of braking
power to the trailer as fast as is needed, providing only the smoothest of
stops just like the original Valley Odyssey. Upgrades include 4 memory preset locations for your different trailers, pressure sensitive manual trailer brake activation and enhanced display graphics!
- Features:
-
- Aside from smoother stops, proportional braking means less wear on both the trailer and vehicle brakes
- Works proportionally even traveling in reverse
- Auto-leveling for an even easier installation
- Exclusive 4 Load Range ("Boost") settings for even greater adjustment
- Press-down pressure sensitive manual override will still activate brake lamps
- Easy to read digital display
- Diagnostics system continually checks for shorts and trailer connection
- Power saving mode increases vehicle battery life
- Includes mounting bracket
- Additional mounting brackets are sold separately making it easier to use the same controller in more than one vehicle
- New easy disconnect feature allows removal and storage the controller when not in use
- Vehicle specific wiring adapters are available (sold separately) to make installation simple
- Plug on the back of the controller will work with Valley and Tekonsha quick disconnect harnesses
- Controller will work on most trailers with electronically activated hydraulic brake systems
- Valley Odyssey II is polarity protected - if the positive and negative leads are reversed the unit will isolate itself from power input
- Limited lifetime warranty
- Specs:
-
- Dimensions: 3-5/8" (W) x 4-3/4" (L) x 1-1/2" (H)
- Made for up to four-axle trailer brake systems (8 Brakes)
- 360 degree vertical plane operating range
- Can be mounted pointing straight down or straight up
- 20 degree horizontal mounting range
- Boost levels increase power up 0%, 16%, 25% and 28%
- Power saving sleep mode draws .003 milliamps
- Made in the U.S.A.
- Required: For vehicles without brake control adapters.
-
