Tow Ready Universal Brake Control Wiring Adapter for Pre-Wired Nissan Vehicles:
- 2005-07 Nissan Frontier
- 2004-08 Nissan Titan
- 2005-08 Nissan Pathfinder
- 2004-08 Nissan Armada
Tech Tip: The harness will be located underneath and left of the steering column, taped to another harness near the emergency brake predal. It is a 6-pin connector that mates with the 18266 brake control wiring adapter.
The brake control wiring adapter is used to simplify the electric brake controller installation. The 4 wires on the adapter are butt-connected to the 4 wires coming out of the electric brake controller. The harness is then plugged in to a port under the dash. In most cases, the factory will have run the rest of the wires to the 7-way trailer connector in the back of the vehicle.
See Larger
Instructions
