Top 20 Most Popular Toyota Tacoma Bike Rackschange vehicle

Toyota Tacoma Hitch Bike Racks Questions

• Bike Rack Recommendation to Go Between a 2010 Toyota Tacoma and a Rockwood Popup Camper
  
• I reocmmend a towing rack like # S64955 which is designed for up to 3 bikes. You will just need to use a long enough ball mount such as # 2736, # 80233 or # D-28 so the rack can clamp on properly. Also, when using a towing rack, the combined weight of the bikes and the rack count as tongue weight. The rack features rotating cradles on a single arm so it is compatible with many different bike types. The rotating cradles will allow you to mount bikes with slanted top frame bars level. Of step-
  view full answer...


• Five Bike Trailer Hitch Mount Bike Rack Recommendation for a Cadillac Escalade
  
• We have a few different 5 bike racks, see link, but to handle such a wide variety of bikes I recommend going with the single arm Swagman XP, # S64970. The only bike that might be troublesome is the one for the 2 year old. The top frame tube would have to be more than 7-3/16 inches long to fit on the rack cradle. The rotating cradles will allow you to carry the bikes level without the use of an adapter bar. I have included a link to the installation details for you to view.
  view full answer...


• How Does the Kuat NV Trailer Hitch Mount Bike Rack Secure the Front Wheel of a Bike
  
• The arms that secures the front bike wheel on the Kuat NV, # N101-103, is meant to be positioned so that the hook part of the arm is pressing down on the front tire right in front of the fork. It ratchets down and cannot come loose unless the release button is pressed. To lock the bikes you have to use the integrated cable lock. I have included a link to a video review of the rack for you.
  view full answer...


• Threaded Hitch Pin on Swagman XTC-2 Bike Rack # S64670 Does Not Go All the Way Through Receiver
  
• I spoke with my contact at Swagman and she stated that the threaded hitch pin does not need to be clipped on the other side to be secure. All you will need to do is to tighten it as much as you can with the included tool and it will be fine. If you would prefer to have it so that it is secure on both sides, my contact stated that you will need to use the locking hitch pin, # S64029, and that should fit.
  view full answer...


• Thule T2 Hitch Mounted Folding Bike Rack Clearance for Opening the Tailgate on a Toyota Tacoma
  
• When the bike rack is loaded with bikes, the shank on the Thule T2 Bike Carrier, item # TH916XTR, measures 19 inches from the center of the hitch pin hole to the first bike carrier rail. When the bike rack is tilted up, you will lose clearance, and will have 11 inches between the hitch pin hole and the bike-carrier rails. When the bike rack is tilted away from the truck your tailgate height will determine whether the gate can be opened. You might want to take a look at the video we offer of
  view full answer...


• Will the Swagman Trailhead Trailer Hitch Mount Bike Rack Fit a 2010 Toyota Tacoma
  
• The Swagman Trailhead bike rack # S63360 is designed to fit in either a 1-1/4 inch or 2 inch trailer hitch receiver. Provided your 2010 Toyota Tacoma has one of these hitch sizes (and these are the two most common) then the bike rack will fit. Clearance should not be an issue because the bike rack measures 11 inches from the center of the hitch pin hole to the back of the upright bar. If the measurement from the hitch pin hole on the truck back to clear the rear bumper is less than 11 inches
  view full answer...

Toyota Tacoma Roof Bike Racks Questions

• Roof Rack Bike Rack for a Thule Xsporter Ladder Rack on a 2012 Toyota Tacoma
  
• The Thule Sidearm, # TH594XT, will fit the Xsporter ladder rack # TH500 without the need for other accessories or adapters. We also have the Big Mouth # TH599XTR but you would need adapter # Xadapt2 to fit the Xsporter bars. And we also have the Criterium, # TH598, which requires adapter # Xadapt8, to install to the Xsporter bars. All other Thule racks require removing the front wheel to mount the bikes. I have linked instructions and some videos for you.
  view full answer...


• Will the Swagman Barracuda Bicycle Roof Rack fit the 2-1/2 Inch bars on a 2007 Toyota Tacoma Pickup
  
• The Swagman Barracuda, part # S64730, mounts to cross bars no wider than 2 inches. The Barracuda does not come with cross bars. If your pickup has cross bars (those that run from the driver to passenger side of the vehicle)that are 2-1/2 inches wide then you can use the Thule Ride-On Adapter, part number TH532, to install the bike rack as long as the cross bars are oval and no more than 2-1/2 by 2 inches tall. If your cross bars are round or square and 2-1/2 inches them we do not have an adapter
  view full answer...

Toyota Tacoma Trunk Bike Racks Questions

• Bike Rack Options for a Toyota Tacoma without a Hitch
  
• There is a way to put a bike rack on your Toyota Tacoma without using a hitch, but it is not recommended to use a trunk mounted bike rack on a truck. I would recommend a Thule Insta-Gater Truck Bed Single Bike Rack, part # th501. This rack provides an excellent alternative to a hitch mounted bike carrier, especially if your hitch is already being used for towing. It also attaches to the front wheel so it would not be necessary to remove the front wheel on the bike to mount it to the rack.
  view full answer...

Toyota Tacoma Truck Bed Bike Racks Questions

• Bike Rack Recommendation for a 2013 Toyota Tacoma with the Bed Rail System
  
• We have two bike racks that will work well with the bed rail system on your 2013 Toyota Tacoma. The RockyMounts DriveShaft SD, # RKY1085, that you referenced will fit and works with standard fork mount bikes as well as 15-mm and 20-mm thru axle bikes. I have attached a video showing how this bike rack attaches to a bed rail system for you to check out. If you do not have a thru axle bike, another bike rack that you may be interested in is the RockyMounts Clutch SD, # RKY011. This bike rack w
  view full answer...


• Can RockyMounts Bed Rail Bike Carrier # RKY011 Stay Mounted With Installation of Tonneau Cover
  
• The RockyMounts Truck Bed Rail Bike Carrier, part # RKY011, you have referenced, is designed to be installed on the factory-installed deck rail system rails of your 2012 Toyota Tacoma. The square brackets in the mounting hardware of the bike carrier will slide into the channel of the factory deck rail system. Then, the two bolts are inserted through the bracket and tightened down to hold the bracket in place. If your tonneau cover is installed in the channels of your factory rails, then the b
  view full answer...


• Hardware Size to Install the Yakima BlockHead Single Bike Truck Bed Mounted Rack
  
• The hardware for the Yakima BlockHead bike rack, # Y01117, is not included. Basically you can use any hardware that will fit and that is appropriate for the surface you wish to mount the rack on. I recommend a fastener that requires an uncommon tool to help deter theft. The instructions mention using 1/4 inch (6mm) bolts or screws, washers, and locking nuts. I have included a link to the installation instructions for you.
  view full answer...


• How Secure and Sturdy is Truck Bed 3 Bike Carrier - Topline - Expandable, # UG2500-3
  
• I went out to the warehouse to do a little testing on one of these racks. On the Truck Bed 3 Bike Carrier - Topline - Expandable, # UG2500-3, side to side movement will be limited as the arms are rigid. The clamps do allow for some up and down movement which will reduce the stress on the aluminum arms and so the bikes can move with the bed floor as you drive. The arms are sturdy and it would take a lot of torque, more than a person can produce without tools or machines, to bend or break them
  view full answer...


• Is it Possible to get RockyMounts Clutch SD Truck Bed Rail Bike Carriers Keyed Alike
  
• Most likely if you purchased 3 RockyMounts Clutch SD Truck Bed Rail Bike Carriers # RKY011 you would get three different lock cylinders that would require different keys. What you could do is get RockyMounts Replacement Lock set # RKY0334. This is a replacement key set that comes with four matching lock cylinders that you could replace with the ones in the # RKY011 that you plan on purchasing and you would be good to go.
  view full answer...


• Options for Carrying 4 Bikes In a 2010 Toyota Tacoma Truck Bed with Rail Track Tie Down System
  
• We do have some truck bed mounted bike racks that will work with your 2010 Toyota Tacoma with rail track system, but the Topline system will not fit because direct access to the bed rails is needed to secure the clamps. For in bed 4 bike transport you could use four of the Yakima BlockHead Single Bike Truck Bed Mounted Racks, item # Y01117. Another option for your truck would be a hitch mounted bike rack like the Thule Parkway 4 Bike Hitch Mounted Folding Rack, item # TH956. If you need a
  view full answer...


• Truck Bed Bike Rack for a 2004 Toyota Tacoma for a Bike with a Thru-Axle
  
• We have numerous truck bed bike racks you could potentially use in your 2004 Toyota Tacoma. I have included a link to the options for you. On a bike with a thru-axle you could use # RKY1085 or # RKY1084 if you are looking for a fork mount. For a rack that grabs the frame I recommend the Topline rack # UG2500. It clamps to the bed side and to the bike frame. I have linked a video showing how it works. We also have the Thule Insta-Gater, # TH501 that will hold the wheel. I have linked a vide
  view full answer...


• Will the Swagman Truck Bed Bike Rack fit in a 2002 Toyota Tacoma
  
• The Swagman Pick-Up Truck-Bed Mounted Bike Carrier # S64702 that you referenced should work in the bed of your 2002 Toyota Tacoma as it is designed to fit nearly all compact and full-size truck beds. You could measure your truck bed to be certain though. This product is adjustable from 52 inches to 69 inches. If you find that the distance between your bed rails fits in this range this product will work well for you. For a lock you could get a DeadBolt Lock part # CAB-10. I attached install
  view full answer...


• Will the Topline Truck Bed Bike Rack # UG2500 Work with a BAKFlip Fibermax Cover Installed
  
• Since the track for the BAKFlip fibermax cover is in the way, you will not be able to use the Topline truck bed bike rack # UG2500. Since the cover is a nice accessory, I do not recommend modifying it for the sake of the Topline rack. Instead, take a look at the BeddyJo, # Y01116. This will not interfere with the cover at all since it is secured by the gap between the tailgate and truck bed. I have included a link to a video review for you.
  view full answer...


• Will the Yakima BedHead Bike Rack # Y01133 Fit on a 2005 Toyota Tacoma Access Cab
  
• To determine if the Yakima BedHead Clamp-On Bike Rack, # Y01133, will fit on your 2005 Toyota Tacoma, you will need to look at the top of your truck bed rails. This bike rack is designed to hook on the underside of the trick bed side rails (see photo). There must be a lip present for the hook to grip the rail. If your truck has the bed rail system, then we do have an option for you, however the BedHead will not work. Instead, you could use the RockyMounts Clutch SD Bed Rail Bike Rack, # RKY01
  view full answer...


• Will the Yakima Locking BedHead Bike Rack # Y01133 Fit a 2010 Toyota Tacoma TRD
  
• I spoke with my contact at Yakima. He stated that the BedHead, # Y01133, will not fit your 2010 Toyota Tacoma, but there is a similar product that will. Take a look at the Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack, # Y01118. The main difference is that to install the BlockHead, you will have to drill two holes per BlockHead. I have included a link to the installation details below. There is also a non-locking version; the Yakima BlockHead Single Bike Truck Bed Mounted Rac
  view full answer...


• Will Truck Bed Bike Rack UG2500 Work on a Toyota Tacoma with a Bed Liner
  
• The truck bed bike rack system # UG2500 is installed by clamping directly to the top of the truck bed side wall. If the bed liner on your Tacoma covers the bed rail, you would need to cut the 3 inch diameter hole for installation using a hole saw, which can be purchased at any hardware store. To get a better idea of whether the bike rack will work on your application, I recommend taking a look a the close up pictures on the product page, which show the mounting style on trucks with bed liners
  view full answer...

Do you have a question?

Have a question about the best bike rack for your Toyota Tacoma? click here.