Select Your Vehicle

View Cart

Top 20 Most Popular Toyota Sienna Bike Rackschange vehicle



#1Thule Hitching Post Pro - Folding Tilting 4 Bike Rack w Anti-Sway - 1-1/4" and 2" Hitches

Thule

Rating:
141 reviews

TH934XTR

Retail:$219.00

Price:$199.00


Product Summary:

view all Hitch Bike Racks

Hanging Rack

4 Bikes

Steel

Locks Not Included


Product Specs:

Fits 1-1/4 and 2 Inch Hitch

Class 1 - 3 Compatible

Frame Mount - Anti-Sway

Tilt-Away Rack
Fold-Up Rack

Thule


more information       


Questions from Toyota Sienna owners about this Bike Rack

  • To install a bike rack on your 2014 Toyota Sienna, you'd first need to install a trailer hitch, if you don't have one already. The Curt Class III trailer hitch, part # C13105 would be an excellent choice. The Class III hitch uses the more common 2 inch receiver opening, which would give you a better selection of hitch mounted accessories like a bike rack like the Thule Hitching Post Pro # TH934XTR or a cargo carrier like the Curt # C18153. For carrying 4 bikes, you cannot go...
    view full answer...

  • The Thule Hitching Post Pro bike carrier # TH934XTR does fit both 1-1/4 inch and 2 inch trailer hitches using the included sleeve that fits on the bike carrier shank. With the adapter sleeve on it fits 2 inch hitches. If given the option of a 1-1/4 inch or 2 inch hitch I always recommend the 2 inch hitch. A 2 inch trailer hitch is going to be sturdier and have more accessory options than 1-1/4 inch hitches. And since this carrier has a threaded hitch bolt to limit movement...
    view full answer...






#2Pro Series Eclipse 4 Bike Rack for 2" Hitches - Tilting

Pro Series

Rating:
227 reviews

63124

Retail:$157.49

Price:$125.95


Product Summary:

view all Hitch Bike Racks

Hanging Rack

4 Bikes

Steel

Locks Not Included


Product Specs:

Fits 2 Inch Hitch

Class 3

Frame Mount - Standard

Tilt-Away Rack

Pro Series


more information       





#3Thule Apex 5 Bike Rack for 2" Hitches - Tilting

Thule

Rating:
23 reviews

TH9026

Price:$449.95


Product Summary:

view all Hitch Bike Racks

Hanging Rack

5 Bikes

Steel

Bike and Hitch Lock


Product Specs:

Fits 2 Inch Hitch

Class 3

Frame Mount - Anti-Sway

Tilt-Away Rack
Fold-Up Rack

Thule


more information       


Questions from Toyota Sienna owners about this Bike Rack

  • Yes, the frame adapter is the Thule Womens and Alternative Frame Bike Adapter Bar, part # TH982. This adapter bar works for children, womens, or alternative frame bicycles and allows your to mount the bike level on your Thule Apex 5 Bike Carrier, part # TH9026. The Thule Womens and Alternative Frame Bike Adapter Bar, part # TH982XT, will work great with your Thule Apex 5 Bike Carrier, part # TH9026 on your 2004 Toyota Sienna with 2 inch hitch. I have linked a video overview...
    view full answer...

  • Since you have a Class II trailer hitch with a 1-1/4 inch receiver, there is only 1 bike rack option if you wanted a 5 bike rack. Take a look at the Yakima RidgeBack 5, # Y02459. This rack can hold 5 bikes and it fits either a Class II, 1-1/4 or Class III, 2 inch trailer hitch receiver. It has a straight shank so if you where to measure from level ground up to the bottom of the receiver opening, that will tell you the amount of ground clearance there will be. The arms and...
    view full answer...

  • The suspension enhancement is going to help prevent any sag when the vehicle is loaded and hopefully it will be enough for you to avoid having to load and unload out in the street! There aren't an overwhelming amount of options for 5-bike racks, see link. I would go with the Vertex, # TH9030XT personally but I do have another option you may not have considered. If you are able to keep just one of the bikes, the smallest one, inside the van, then you could use the swing...
    view full answer...






#4Thule Apex Swing 4 Bike Rack for 2" Hitches - Swinging

Thule

Rating:
38 reviews

TH9027

Price:$499.95


Product Summary:

view all Hitch Bike Racks

Hanging Rack

4 Bikes

Steel

Bike and Hitch Lock


Product Specs:

Fits 2 Inch Hitch

Class 3

Frame Mount - Anti-Sway

Swing-Away Rack
Fold-Up Rack

Thule


more information       


Questions from Toyota Sienna owners about this Bike Rack

  • We have installed Curt trailer hitch # C13105 on a 2012 Toyota Sienna and found that from the center of the hitch pin hole straight back to clear the rear bumper measured 5-1/2 inches. On the Thule Apex swinging rack # TH9027, from the center of the hitch pin hole to the anti-rattle knob portion is 4 inches so it would interfere with the bumper. What I recommend is the Thule Vertex swinging rack, # TH9031XT. This rack does not have that anti-rattle knob so it would fit without...
    view full answer...

  • Beginning with a hitch, I'd recommend the Curt Class III, part # C13105. I'll link you to installation instructions and an install video showing the hitch being installed on a 2013 Sienna. The procedure for your 2014 model would be almost identical. For a bike rack, I've got an alternative suggestion for you. Take a look at the Softride Dura Parallelogram, part # SR26247. The Dura tilts away from the vehicle, allowing your rear hatch to fully open, as you can see in the product...
    view full answer...

  • There is not much clearance from the center of the hitch pin hole to the anti-rattle knob on the Thule Apex swinging bike rack # TH9027, only 4-1/4 inches. You will need to measure the distance from the center of the hitch pin hole straight back to the distance required to clear the rear bumper. It is is less than 4-1/4 inches then you can use the Apex. I included a picture with some important measurements for you. Another option besides the Vertex, # TH9031XT, is the Yakima...
    view full answer...

  • You should not have any issue using the Thule Apex Swing 4 Bike Carrier, # TH9027, on your 2009 Toyota Sienna. I spoke with my contact at Thule and this bike rack weights 53.5 lbs and has a weight capacity of 140 lbs. Even at maximum load this rack is well under the tongue weight capacity of your hitch. You should also check the tongue weight capacity of your vehicle and never exceed the capacity of the lowest rated tongue weight. I would also recommend the Thule Bike Adapter...
    view full answer...

  • The trailer hitch that I recommend for your 2011 Toyota Sienna is the Curt Class III Trailer Hitch, # C13105. This trailer hitch has a 2 x 2 inch receiver which is compatible with most hitch mount accessories. I have attached installation instructions and our installation video for you to check out if you plan on performing the install yourself. For the bike rack, you have two different style options. We offer the platform style bike racks like the Thule T2 Bike Rack, # TH916XTR....
    view full answer...

  • Yes, the Hidden Hitch part # 87586 would be the correct hitch to get for your 2011 Toyota Sienna that would allow you to install the Thule Apex Bike Rack part # TH9027. Check out the review video I attached that shows this rack being demoed on a similar Sienna as yours. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike Adapter # 64005 to...
    view full answer...

  • The hitch that was installed on the 2013 Toyota Sienna in the video you referenced was the Hidden Hitch part # 87586. Check out the video I attached that shows this hitch being installed on this vehicle. Since we were able to fit the Thule Apex Swing 4 Bike Rack # TH9027 on your vehicle with this hitch I would recommend you get both the Hidden Hitch and the Apex as both are great products. The Hidden Hitch # 87586 is a Class III hitch with plenty of capacity that would carry...
    view full answer...

  • The rack I recommend that is a confirmed fit for your 2011 Toyota Sienna and 1998 Toyota RAV4 is the Thule Apex Swing 4 Bike Carrier part # TH9027. Not only does this rack have every feature on most standard racks like anti-sway cradles, arced arms, anti-rattle locking hitch pin, and integrated cable lock it also has the ability to swing away from your vehicle with bikes loaded to give you complete rear cargo access on your vehicles whenever needed. This rack will have plenty...
    view full answer...






#5Thule Parkway 4 Bike Rack for 2" Hitches - Tilting

Thule

Rating:
69 reviews

TH956

Price:$199.95


Product Summary:

view all Hitch Bike Racks

Hanging Rack

4 Bikes

Steel

Locks Not Included


Product Specs:

Fits 2 Inch Hitch

Class 3

Frame Mount - Standard

Tilt-Away Rack

Thule


more information       


Questions from Toyota Sienna owners about this Bike Rack

  • First, to use the Thule Parkway 4 Bike Hitch Mounted Folding Rack, # TH956, you would need to add a trailer hitch to your 2006 Toyota Sienna. I recommend the Hidden Hitch Trailer Hitch, part # 87415. This hitch has a 2 inch receiver opening that is compatible with the Thule Parkway or any other 2 inch bike rack. With a 2 inch hitch, there is a wider selection of bike racks and hitch accessories that you can use. One thing to consider is the distance from the center of the...
    view full answer...






#6Hollywood Racks Sport Rider SE 4-Bike Platform Rack - 2" Hitches - Frame Mount

Hollywood Racks

Rating:
38 reviews

HR1400

Retail:$443.99

Price:$399.59


Product Summary:

view all Hitch Bike Racks

Platform Rack

2 Bikes
4 Bikes

Steel

Bike and Hitch Lock


Product Specs:

Fits 2 Inch Hitch

Class 3

Wheel and Frame Mount

Tilt-Away Rack
Fold-Up Rack

Hollywood Racks


more information       


Questions from Toyota Sienna owners about this Bike Rack

  • The distance from the center of the pin hole to the edge of the closest wheel loop is 12 inches on the Hollywood Racks Sport Rider SE bike rack # HR1400. Based on the hitch install we did on a 2005 Toyota Sienna, the distance from the pin hole to the edge of the bumper was around 6 inches, so you should have enough clearance to use the Sport Rider SE rack. Double check this measurement on your Sienna in case there are any variances. I am including links to the installation...
    view full answer...

  • Yes, when folded down the Hollywood Racks Sport Rider SE 4-Bike Carrier # HR1400 that you referenced will have enough clearance for you to open the rear door without bikes loaded. The reason I know this is because we tested the 2 bike version of this rack part # HR1450 on a 2013 Toyota Sienna like yours and it had plenty of clearance when folded down for the door to open. I attached the review video for this product for you to check out that shows this. For a bike rack that...
    view full answer...






#7Yakima DoubleDown 4 Bike Hitch Mounted Folding Rack for 1-1/4" & 2"

Yakima

Rating:
59 reviews

Y02424

Retail:$219.00

Price:$197.10


Product Summary:

view all Hitch Bike Racks

Hanging Rack

4 Bikes

Steel

Locks Not Included


Product Specs:

Fits 1-1/4 and 2 Inch Hitch

Class 2 - 3 Compatible

Frame Mount - Anti-Sway

Tilt-Away Rack
Fold-Up Rack

Yakima


more information       





#8Thule Passage 3 Bike Carrier - Trunk Mount

Thule

Rating:
29 reviews

TH911XT

Price:$159.95


Product Summary:

view all Trunk Bike Racks

Frame Mount - Anti-Sway

3 Bikes

Locks Not Included


Product Specs:

Dual Arm

Folding

Hanging Rack

Thule


more information       


Questions from Toyota Sienna owners about this Bike Rack

  • The Thule Passage 3 Bike Rack part # TH911XT that you referenced is confirmed to fit your 2007 Toyota Sienna and would work well for you. Check out the review video I attached. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike Adapter # 64005 to provide a horizontal top tube on your bikes to provide an attachment point. I attached a review...
    view full answer...

  • For a 3-bike rack to fit both your 2004 Pontiac Grand Prix with factory spoiler and your 2002 Toyota Sienna van, I would recommend the Yakima KingJoe 3 Bike Trunk Rack, item # Y02620. If the spoiler on your Grand Prix is not the factory option, the KingJoe rack will not fit. The Thule Speedway 3 Bike Carrier, item # TH911XT, will work on your 2002 Toyota Sienna van, but is not recommended for use on the Grand Prix with rear spoiler.
    view full answer...






#9Upright Roof Bike Carrier

Swagman

Rating:
75 reviews

S64720

Retail:$52.00

Price:$46.80


Product Summary:

view all Roof Bike Racks

Frame Mount

5mm Fork
9mm Fork
15mm Fork
9mm Thru-Axle
15mm Thru-Axle
20mm Thru-Axle

Steel

Bike Lock


Product Specs:

Round Bars
Square Bars
Factory Bars

Disc Brake Compatible

Clamp On - Standard

Black

Swagman


more information       


Questions from Toyota Sienna owners about this Bike Rack

  • The Rooftop Bike Carrier, item # S64720, comes with two sets of U-bolts to attach the carrier to your factory cross bars. The smaller size U-bolts measure 2 inches by 2 inches so your cross bars would have to be less than 2 inches thick and 2 inches wide or less. The larger U-bolts are 2 inches by 3-1/4 inches and your cross bars would have to be less than 2 inches thick and 3-1/4 inches wide or less. The Distance between your cross bars can be no less than 28 inches to use...
    view full answer...

  • The answer to your question will depend on the both the width of your bikes at their widest point and the weight capacity of your existing roof rack. If your Sienna has the factory roof rack, the capacity should be listed in the owners manual. If you are using an aftermarket rack, you will need to check with the manufacturer. Each rack weighs around 6-1/2 lbs. Make sure that the weight of the three racks plus the bikes does not exceed the weight capacity of the roof rack. I...
    view full answer...

  • Check the weight capacity of the roof in your vehicle owner manual, but you should be able to fit two of these on your 2005 Toyota Sienna. The limiting factor is not these carriers, but rather the bikes themselves. Be aware of how wide the handle bars are and make sure they will not interfere with each other.
    view full answer...






#10Swagman XTC4 4-Bike Rack for 2" Hitches - Platform Style

Swagman

Rating:
93 reviews

S64665

Retail:$410.00

Price:$351.00


Product Summary:

view all Hitch Bike Racks

Platform Rack

4 Bikes

Steel

Bike and Hitch Lock


Product Specs:

Fits 2 Inch Hitch

Class 3

Wheel and Frame Mount

Fold-Up Rack

Swagman


more information       


Questions from Toyota Sienna owners about this Bike Rack

  • I have a solution that will enable you to carry 4 bikes on your 2008 Toyota Sienna that allows you to fold the bike rack up when not in use. For a trailer hitch, I recommend the Curt # C13105. This hitch has a measurement from the center of the hitch pin hole to the outermost edge of the bumper of 4 inches. This hitch has the shortest distance available at this time. I have attached a brief installation video on a 2007 Sienna. You are correct about the Swagman XTC4 # S64665...
    view full answer...






#11Hollywood Racks Traveler 5 Bike Carrier for 2" Hitches - Tilting

Hollywood Racks

Rating:
5 reviews

HR9200

Retail:$219.99

Price:$197.99


Product Summary:

view all Hitch Bike Racks

Hanging Rack

5 Bikes

Steel

Locks Not Included


Product Specs:

Fits 2 Inch Hitch

Class 3

Frame Mount - Anti-Sway

Tilt-Away Rack
Fold-Up Rack

Hollywood Racks


more information       





#12Softride Element Parallelogram Tilting 4 Bike Rack for 1-1/4" and 2" Hitches

Softride

Rating:
31 reviews

SR26248

Price:$223.00


Product Summary:

view all Hitch Bike Racks

Hanging Rack

4 Bikes

Steel

Locks Not Included


Product Specs:

Fits 1-1/4 and 2 Inch Hitch

Class 2 - 3 Compatible

Frame Mount - Standard

Tilt-Away Rack
Fold-Up Rack
Swing-Away Rack

Softride


more information       





#13Softride Dura Parallelogram 4 Bike Rack for 1-1/4" and 2" Hitches - Tilting

Softride

Rating:
58 reviews

SR26247

Price:$300.00


Product Summary:

view all Hitch Bike Racks

Hanging Rack

4 Bikes

Steel

Bike and Hitch Lock


Product Specs:

Fits 1-1/4 and 2 Inch Hitch

Class 2 - 3 Compatible

Frame Mount - Anti-Sway

Tilt-Away Rack
Swing-Away Rack

Softride


more information       





#14Swagman Trailhead 4 Bike Rack for 1-1/4" and 2" Hitches - Tilting

Swagman

Rating:
28 reviews

S63380

Retail:$190.00

Price:$171.00


Product Summary:

view all Hitch Bike Racks

Hanging Rack

4 Bikes

Steel

Locks Not Included


Product Specs:

Fits 1-1/4 and 2 Inch Hitch

Class 1 - 3 Compatible

Frame Mount - Anti-Sway

Tilt-Away Rack
Fold-Up Rack

Swagman


more information       





#15Swagman XP - Folding 5 Bike Rack for 2" Trailer Hitches

Swagman

Rating:
5 reviews

S64970

Retail:$376.00

Price:$338.40


Product Summary:

view all Hitch Bike Racks

Hanging Rack

5 Bikes

Steel

Bike Lock


Product Specs:

Fits 2 Inch Hitch

Class 3

Frame Mount - Standard

Tilt-Away Rack

Swagman


more information       


Questions from Toyota Sienna owners about this Bike Rack






#16Yakima KingJoe Pro 3 Bike Rack - Folding Arms - Trunk Mount

Yakima

Rating:
18 reviews

Y02625

Price:$185.00


Product Summary:

view all Trunk Bike Racks

Frame Mount - Anti-Sway

3 Bikes

Locks Not Included


Product Specs:

Dual Arm

Folding

Hanging Rack

Yakima


more information       


Questions from Toyota Sienna owners about this Bike Rack

  • Yes, the Yakima KingJoe Pro, # Y02625, will fit your 2007 Toyota Sienna. I have also included a link to all of the trunk mount bike racks that will fit your van. If you will be carrying womens, childrens, or alternative frame bikes, I recommend using the Tube Top adapter bar, # Y02531, for greater ground clearance and to carry the bikes more level. I have linked a video that shows how the adapter works.
    view full answer...






#17Highland SportWing 4 Bike Rack for 2" Hitches - Aluminum

Highland

Rating:
27 reviews

1370400

Retail:$272.50

Price:$223.95


Product Summary:

view all Hitch Bike Racks

Hanging Rack

4 Bikes

Aluminum

Locks Not Included


Product Specs:

Fits 2 Inch Hitch

Class 3

Wheel Only Mount

Fixed Rack

Highland


more information       





#18Swagman XC 2-Bike Rack Platform Style for 1-1/4" and 2" Trailer Hitches

Swagman

Rating:
261 reviews

S64650

Retail:$185.00

Price:$160.95


Product Summary:

view all Hitch Bike Racks

Platform Rack

2 Bikes

Steel

Locks Not Included


Product Specs:

Fits 1-1/4 and 2 Inch Hitch

Class 1 - 3 Compatible

Wheel and Frame Mount

Fixed Rack

Swagman


more information       





#19Hollywood Racks Sport Rider SE2 2-Bike Platform Rack - 2" Hitches - Frame Mount

Hollywood Racks

Rating:
31 reviews

HR1450

Retail:$329.99

Price:$296.99


Product Summary:

view all Hitch Bike Racks

Platform Rack

2 Bikes

Steel

Bike and Hitch Lock


Product Specs:

Fits 2 Inch Hitch

Class 3

Wheel and Frame Mount

Tilt-Away Rack
Fold-Up Rack

Hollywood Racks


more information       





#20Thule Passage 2 Bike Carrier - Trunk Mount

Thule

Rating:
124 reviews

TH910XT

Price:$139.95


Product Summary:

view all Trunk Bike Racks

Frame Mount - Anti-Sway

2 Bikes

Locks Not Included


Product Specs:

Dual Arm

Folding

Hanging Rack

Thule


more information       


Questions from Toyota Sienna owners about this Bike Rack

  • I do have a bike rack solution for you but trunk mount bike racks will not fit the 2011 Toyota Sienna because the vehicle can not support the weight of a rack and bikes at the points where it would have to mount to the van. The remaining options are a roof rack or a hitch. A trailer hitch is the more cost effective and safest option and the bikes will be easier to load. You could also use the hitch to tow if you ever needed to or carry a cargo carrier. For a trailer hitch...
    view full answer...

  • The Thule Passage Two-Bike Trunk Mounted Bike Rack you referenced, part # TH910XT is indeed a fit for your 2009 Toyota Sienna. I have also linked you to the rest of the trunk mounted racks that would be a fit for your vehicle. You might also want to take a look at the Raceway 2 bike model, part # TH9001PRO. Instead of 6 straps and buckles used to attach the rack to the vehicle, the Raceway uses 4 ratcheting cables that are much easier to use. Simply spool out the cables, attach...
    view full answer...

  • I did some research online trying to get a good look at the spoiler on the liftgate of that vehicle. Here is the bottom line on minivan spoilers. If there is a gap between the spoiler and the vehicle that would allow the mounting straps to pass through and attach to the top of the door WITHOUT passing over the spoiler, a trunk mounted bike rack could be used. However, since your spoiler does NOT have a gap and the straps or cables would have to pass over the top of the spoiler,...
    view full answer...

  • I checked with Thule and this Thule Trunk Bike Rack # TH910XT that you referenced will work on your 2009 Toyota Sienna. Check out the review video and installation instructions I attached for you also. If you plan on transporting any womens or alternative framed bikes without a horizontal top tube you may also be interested in purchasing a Thule Womens and Alternative Frame Bike Adapter Bar # TH982XT to provide a horizontal top tube for the rack to attach to easier. Check out...
    view full answer...







Toyota Sienna Hitch Bike Racks Videos

Yakima FullTilt Hitch Bike Racks Review - 2013 Toyota Sienna

Today on our 2013 Toyota Sienna, were going to be doing a test fit on the Yakima Full Tilt. This is a folding and tilting 4 bike rack. Its been designed for use 1-1/4 or 2 hitches. Part number is Y02462. To begin our test fit, well slide the shank of the rack right into the receiver tube of our hitch. We need to slide it in far enough, so where the small silver pin appears on our pinhole.



Yakima FullSwing Hitch Bike Racks Review - 2013 Toyota Sienna

Today on our 2013 Toyota Sienna we're going to be test fitting the Yakima FullSwing. This is a swing-away-style folding arm 4-bike rack. It's been designed for use in 2" hitches. Part number on it is Y02465. Now to begin our test fit we need to slide the shank of the rack right into the receiver tube of our hitch. We'll slide it in far enough so that the silver pin appears in our hitch pinhole. We'll then come to the rear and tighten down the red triangle-shaped knob.



Saris Freedom SuperClamp Hitch Bike Racks Review - 2013 Toyota Sienna

Rate your transcript OrderClientKevin BrossRef #20479Order #TC0854442168 Today on our 2013 Toyota Sienna, we're going to do a test fit on the Saris Freedom SuperClamp. This is a platform style 2 bike rack. It's been designed for use in either the 1-1/4 inch or 2 inch hitches. Part number on it is SA4025. Now to begin our test fit, we need to slide the shank of the rack into the receiver tube of our hitch. As we do this, we want to line up our threaded hole with our hitch pin hole. We can then take our anti-rattle bolt which is provided, and we'll thread that in from the left to the right.



Saris Freedom Hitch Bike Racks Review - 2013 Toyota Sienna

Today on our 2013 Toyota Sienna we're going to do a test fit on the Saris Freedom. This is a platform style, 4 bike rack. It will tilt away from your vehicle and tilt up against your vehicle for easy storage. The part number on this is SA4414B. This rack has been designed for use in 2 inch hitches. To begin our test fit we'll slide the shank of it right into the receiver tube of our hitch. As we slide it in, we need to go in far enough so that our pin hole lines up with our hitch pin hole.



Saris Axis Hitch Bike Racks Review - 2013 Toyota Sienna

Rate your transcript OrderClientKevin BrossRef #20473Order #TC0845111149 Today on our 2013 Toyota Sienna we're going to be doing a test-fit of the Saris Axis. This is a folding and tilting 3 bike rack. It's been designed so you can use it with 1-1/4" or 2" hitches. The part number is SA843B. To begin our test fit we need to slide the shank of the rack right into the receiver tube of our hitch. We got a threaded hole here that we need to line up with our hitch pin hole. Once we have that lined up we'll take our provided bolt.



Saris Axis Hitch Bike Racks Review - 2013 Toyota Sienna

Rate your transcript OrderClientKevin BrossRef #20472Order #TC1064578756 Today on our 2013 Toyota Sienna, were going to test fit the Saris Axis. This is a folding and tilting 2-bike rack. Its been design for use with 1-1/4 or 2 hitches. The part number of the 2-bike configuration is SA832B. We also have this available in a 3-bike as SA833B and a 4-bike as part number SA834B. To being our test fit, well slide the shank of the rack right into the receiver tube of our hitch.



Rhino Rack Hitch Bike Racks Review - 2013 Toyota Sienna

Rate your transcript OrderClientKevin BrossRef #20469Order #TC0891083968 Today on our 2013 Toyota Sienna we're going to be talking a look and doing a test fit on the Rhino Rack folding and tilting 4-bike rack. It's been designed for use with the 1-1/4" or 2" hitch. Part number on it is RBC044. Now to begin our test fit we'll slide the shank of the rack right into the receiver tube of our hitch. As we do we want to line up our threaded hole with our hitch pinhole. We'll then take the anti-rattle bolt which is provided and thread that in. Just run it down util it's hand tight. Now as you can see we've got quite a bit of play there in our connection point where the rack and the vehicle meet so we'll use a wrench to tighten our bolt down.



Kuat NV Hitch Bike Racks Review - 2013 Toyota Sienna

Rate your transcript OrderClientKevin BrossRef #20465Order #TC0881539957 Today on our 2013 Toyota Sienna we're going to be test fitting the Kuat Envy. This is a platform style, folding and tilting 4 bike rack. It's been designed for use in 2 inch hitches. The part number on the black and chrome that I have here is N105-107. This is also available in a gunmetal gray and orange. That part number is N101-103. To begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch.



Saris Bike Porter Hitch Bike Racks Review - 2013 Toyota Sienna

Today on our 2013 Toyota Sienna we're going to be doing a test fit on the Saris Bike Porter. This is a folding and tilting 4-bike rack. It's been designed for 1-1/4" or 2" hitches. Part number on it is SA404B. Now this is also available in a 2-bike configuration; that part number is SA402B. To begin our test fit we'll slide the shank of the rack right into the receiver tube of our hitch. As we do, we want to line up our threaded hole with our hitch pinhole.



Yakima HoldUp Hitch Bike Racks Review - 2012 Toyota Sienna

Today, on our 2012 Toyota Sienna, we're going to be test-fitting the Yakima Holdup 2-bike platform style rack for 2-inch hitches. Part #Y02443. We'll begin our test-fit by inserting the shank of the rack into the hitch on our vehicle. inaudible 00:00:20 You'll want to watch for the hitch pin holes to line up. With those in line we'll go ahead and take the included anti-rattle hitch lock and thread that into the hole. On this particular rack, you'll want to remember, you have to thread it in from passenger side to driver side.



Yakima FullTilt Hitch Bike Racks Review - 2007 Toyota Sienna

Today on our 2007 Toyota Sienna we're going to be test fitting the Yakima FullTilt. This is a folding and tilting 4-bike rack. They've designed it for use with the 1-1/4" or the 2" hitches. Its part number is Y02462. Now to begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. We want the small silver pin that will be sticking out of the left side to appear in the hitch pinhole.



Thule Helium Aero Hitch Bike Racks Review - 2007 Toyota Sienna

Today on our 2007 Toyota Sienna, we're going to be test fitting the Thule Helium Aero. This is a folding and tilting two bike rack. It's been designed for use in 1 1/4 and 2 inch hitches. It's part number is TH9042. To begin the test fit, we're going to slide the shank of the rack right into the receiver tube of our hitch. As we slide it in, we hold out on the black attached pin, line up our pin holes and then place the attached pin through our hitch pin hole. We'll then come here to the anti-rattle bolt, or device rather, knob and tighten that down.



Yakima RidgeBack Hitch Bike Racks Review - 2012 Toyota Sienna

Today on our 2012 Toyota Sienna, we're going to be test fitting the Yakima RidgeBack 4 Bike Rack for 1-1/4- and 2-inch hitches, part #Y02458. We'll begin our test fit by inserting the shank of the rack into our hitch. This does have the anti-rattle device on it and sometimes it helps to guide it in. We'll go ahead and line up the hitch pin holes and inserted the included hitch pin. With that in place, we'll tighten down the anti-rattle device located here at the base of the rack. This will help to take any extra play out of the shank of the rack helping to eliminate movement overall as you're going down the road.



Yakima FullTilt Hitch Bike Racks Review - 2012 Toyota Sienna

Today on our 2012 Toyota Sienna, we're going to be test fitting the Yakima FullTilt 4-Bike Rack for 1 1/4 inch and two-inch hitches, part number Y02462. We'll begin our test-fit by inserting the shank of the rack into the hitch on our vehicle. It helps to keep a hand on the anti-rattle device so that it slides in better. You will also notice that this has self-locking hitch pi located here, so it will actually just snap into place when you get it in the right spot. Now with our hitch pin in place, we'll go ahead and tighten down the anti-rattle knob. This will help take any extra play out of the shank of the rack helping to eliminate movement overall as you're going down the road. As you can see, we're nice and tight there.



Yakima FullSwing Hitch Bike Racks Review - 2012 Toyota Sienna

Today on our 2012 Toyota Sienna we are going to be test fitting the Yakima FullSwing 4-bike rack for 2" hitches. Part Number Y02465. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. You may want to keep a finger on the anti-rattle device to help guide it in. You'll notice this rack does have the self-locking hitch pin so you'll just want to push it in until you get it in the right position. And it will lock into place.



Saris Freedom Hitch Bike Racks Review - 2012 Toyota Sienna

Today on our 2012 Toyota Sienna, we're going to be test fitting the Saris Freedom 4 bike platform-style rack for 2 inch hitches, part number SA4414B. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. You'll want to watch for the hitch pin holes to line up. With those in line, you can insert the threaded anti-rattle hitch bolt. We'll go ahead and thread that down, hand tight, and then finish it off with our wrench. Make sure you're turning the wrench the right way helps. This'll help take any extra play out of the shank of the rack, and helps to eliminate movement overall going down the road. We'll attach the clip to the other side and grab a couple measurements.



Yakima HighLite Hitch Bike Racks Review - 2012 Toyota Sienna

Today on our 2012 Toyota Sienna, we're going to be test fitting the Yakima HighLite, 2 bike rack for inch and a quarter and 2 inch hitches. Part number Y02438. We'll begin our test fit by inserting the shank of our rack, into our hitch. You'll want to watch for the hitch pin holes to line up once you have that inserted. Sometimes it helps to keep a hand on the anti-rattle device so that it slides in smoother. We'll go ahead and insert the attached hitch pin and tighten up the anti-rattle device here at the base of the mast.



Saris Axis Hitch Bike Racks Review - 2012 Toyota Sienna

Today on our 2012 Toyota Sienna, we're going to be test-fitting the Saris Access 3 bike rack for inch and a quarter and 2 inch hitches. Part number SA843B. We'll begin our test fit by inserting the shank of the rack into our hitch on our Sienna. You'll want to watch for the hitch pin holes to line up. With those in line, we'll go ahead and take the anti-rattle hitch lock and thread that into place. We'll go ahead and get this as tight as we can by hand, and then we'll finish it off with a wrench.



Saris Freedom Hitch Bike Racks Review - 2012 Toyota Sienna

Today on our 2012 Toyota Siena we're going to be test fitting the Saris Freedom two bike platform style rack for inch and a quarter and two inch hitches, part number 4412B. We'll begin our test fit by inserting the shank of the rack into our hitch. This rack does come with the adapter for inch and a quarter to two inch and it does just slide right on there. It helps to keep a hand on it as you're inserting it into the hitch and as you line up the hitch pinholes. With our hitch pinholes in line we'll go ahead and insert the threaded anti-rattle hitch bolt and we'll get that hand-tight. With it tightened by hand we'll take our wrench and finish it off. This will help take any extra movement out of the shank of the rack and helping to eliminate movement overall going down the road. We'll then attach the clip to the other side. The closest point of our rack to the vehicle is going to be the wheel cradle.



Saris Axis Hitch Bike Racks Review - 2012 Toyota Sienna

Today on our 2012 Toyota Sienna, we're going to be test fitting the Saris Axis 2-bike rack for 1 1/4 and 2-inch hitches, part number SA832B. We'll begin our test fit by inserting the shank of the rack into the hitch on our Sienna. It does have the adapter which is easily removable. You'll want to keep a hand on it as you insert it and line up the hitch pinholes. With the hitch pinholes in line, we'll go ahead and insert the threaded anti-rattle hitch bolt. We'll tighten this.





Toyota Sienna Roof Bike Racks Videos

Thule Sprint Roof Bike Racks Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're going to be doing the test fit of the Thule Sprint Rooftop Mounted Bike Carrier. It's going to be fork mounted and attached to our factory raised roof rails and factory crossbar. First thing you're going to want to do is make sure that you have the strap undone from the little T slot, that way it can easily receive your bar. Next, place it up on top the vehicle and line up that front pad with your front crossbar, then you can simply slide the back one down and into place where you need it. Go ahead and set it down and adjust it as needed. Let's attach the front one first.



Inno Roof Bike Racks Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're going to be doing a test fit of the Inno Multi Fork Lock bike rack. This is going to be for your roof rack system to mount a single bike with forks. Part number INA392. Up here you can see that we do have our factory raised roof rails, as well as our factory cross bars. We're going to show you how this mounts to that. First step you're going to do is make sure that you have the top unlocked and the strap dropped down and out. Now if you open up this, you'll be able to open up that bottom door too, and have access to where the strap goes.



Inno Roof Bike Racks Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna we're going to be doing a test fit of the Inno Fork Lock III which is going to be your rooftop mounted bike carrier for 1 single bike to be fork-mounted. It's going to be part number INA391 and it's going to come in that nice silver aluminum finish. We're going to show you how it mounts up here on top of our raised factory roof rails with the factory crossbars. First step we're going to need to do is go ahead and unlock and pull off the top cover. That'll give us access to this little lever here which will allow the bottom clamp to come around and undo so we can get around that front crossbar. On the backside here, this one simply just slides on. If you can see the groove there it'll slide on to that bolt and allow us to clamp it on that way.



Yakima FrontLoader Roof Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna were going to be test fitting the Yakima FrontLoader. This is a wheel mount roof bike rack, part number Y02103. With our Yakima RailGrab Roof Rack System already installed on the Sienna, well begin our test fit by placing our bike rack directly onto our crossbar. Here at the front, well want the two outer legs of our clamp to be in front of our crossbar, while the single middle one will be behind it. Well then tighten the black T-handle located at the front of the rack, and that will secure our front clamp. With the front secure we can move to the rear. Here were going to loosen the black T-handle, remove the T-bolt from the lower portion of the clamp, bring that portion around the underside of our crossbar, reinsert our T-bolt, and tighten that black T-handle back down. Its now time to load up our bike. Well begin by undoing our rear wheel strap and making sure that the larger portion of our front wheel clamp is fully extended.



Yakima ForkLift Roof Mounted Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna we are going to be test-fitting the Yakima Forklift, a fork-mount roof bike rack, part number Y02098. With our Yakima Rail Grab roof rack system already installed on the Sienna, we will begin our test-fit by placing our bike rack directly onto our crossbars. Here at the front, we are going to remove the skewer, which is reverse-thread. Slide back the black, plastic cover and loosen the black T handle. This will allow us to remove the T bolt from the lower portion of our clamp. We will then bring that portion around the underside of our load bar. Re-insert our T bolt and tighten down that black T handle to secure it.



Thule Circuit Roof Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna, we're going to be test fitting the Thule Circuit. This is a fork mount roof bike rack, part number TH526. With our Thule Rapid Crossroads Roof Rack system already installed on the Sienna, we're going to begin our test fit by placing our bike rack directly up onto our load bars. Here at the front, we'll need to remove the skewer. Do that by removing this nut, and also the spacer, and our skewer will simply pull out. We'll then lift on the black and gray lever, and as you can see that releases the front portion of our clamp. We'll remove the T-bolt from the lower portion, bring it around the underside, re-insert our T-bolt here at the rear, and lift up on the front of the clamp til we get it into the highest point, it'll connect. We'll then pull down on the black and gray lever to secure the front of our rack, and we'll re-insert our skewer.



Thule Big Mouth Roof Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna were going to be test fitting the Thule Big Mouth. This is a frame clamp style roof bike rack, part number TH599XTR. Weve got our Thule Crossroads roof rack system already installed on our Sienna, so we begin our test fit by placing our bike rack up onto our load bars. These are the clamps. This metal bracket portions going to come around the underside of our load bar, so well need to separate the T bolts from those clamps to allow it to do that. With our T bolts separated well now move our rack backwards, allowing those clamps to come around the underside of our bars.



RockyMounts PitchFork Roof Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna we're going to be test fitting the Rocky Mounts Pitchfork. This is a fork mount roof bike rack, part number RKY0438. We've got the Tooly Crossroads Refrac System already installed on our Sienna. We are going to begin our test fit by just placing our bike rack up onto our load bars. We'll need to remove our front skewer as well as the black plastic cover to access the two Allen bolts located underneath. With our skewer removed we'll take an Allen key, place it down into the Allen bolt and loosen.



Thule Sprint Fork Mount Bike Rack Review - 2014 Toyota Sienna

Speaker: Today, on our 2014 Toyota Sienna, were going to be test-fitting the Thule Sprint. This is a fork mount roof bike rack, part number TH528. Well begin our test fit by placing our bike rack up under a load bar. Here at the front, we want to bring the black rubber coated metal strap around the underside. Well then fit it right here into the head of the carrier. On the back side, well turn this black lever.



Swagman Fork Down Roof Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna, we're going to be test fitting the Swagman Fork Down. This is a fork mount roof bike rack, part number S64710. We've got the Thule Rapid Crossroads roof rack system that we've already installed on this Sienna, so we'll begin our test fit by placing our bike rack directly up on to our load bars. At the front, we're going to bring a U-bolt around the underside of our load bar and thread two wing nuts on to it. We've got a second U-bolt that we're going to fit on the front here. This one as well, we'll get two wing nuts threaded on to it. We'll then tighten down all four of the wing nuts to secure the front clamp of our rack here. All right. With that nice and secure, we can move to the rear.



RockyMounts TieRod Stretch Roof Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna, we're going to be test fitting the Rocky Mounts Tierod Stretch. This is a fork-mount roof bike rack, Part Number RKY1011. We already have the Thule Crossroads Roof Rack System installed on our vehicle. So, we'll begin our test fit by placing our bike rack up onto our load bars. As we do this, we'll want to bring the two black rubber-coated metal straps around the underside of our front-load bar. We can then remove the black cover. We'll bring the straps and fit them up into the appropriate slots here at the head of the carrier. Then we can take our Allen tool and tighten it down.



Kuat TRIO Roof Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna, we are going to be test fitting the Kuat Trio. This is a fork mount roof bike rack part number RU01. We have our thule rapid crossroad roof rack system already installed on our Sienna. We'll begin our test fit by placing our bike rack directly up onto our load bars. At the front we are going to bring one of the black rubber coated metal u bolts and two of the cylinder knots. Place the u bolt up through the rack and then place the cylinder knot on top and just thread it on there.



Swagman Upright Roof Mounted Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna, we're going to be test-fitting the Swagman Upright. This is a frame clamp style roof bike rack, part number S64720. We've got our Thule Rapid Crossroads Roof Rack system already installed on this Sienna here, so we'll begin our test fit by placing our bike rack directly up onto our crossbars. Here at the front, we're going to bring one of our U-bolts around the underside of our load bar and fit it up through the head of the carrier. We'll have a threaded portion coming out in front and behind our load bar. We'll then take a black wing-nut, thread it on here in the front and in the rear.



Thule Big Mouth Roof Bike Rack Review - 2013 Toyota Sienna

Today on our 2013 Toyota Sienna we'll be test fitting a Thule Big Mouth Roof Mounted Bike Rack part number TH599XTR. With the Thule Crossroad Roof Rack system on our vehicle, we'll begin our test fit by placing the bike rack up onto the vehicles load bars. Starting at the front of the bike rack, we'll position the front brackets around the underside of the front bar and make sure that the T-bolts insert into the slots of the front brackets. We'll then use the black wingnuts to tighten them down. We'll the move to the rear and remove one of the black wingnuts. We'll position the black plate around the underside of the rear bar and reinstall our wingnut. Once everything is all tightened down and secured we're ready to load up our bike.



RockyMounts PitchFork Roof Bike Rack Review - 2013 Toyota Sienna

Today on our 2013 Toyota Sienna, well be test fitting the Rocky Mounts pitchfork roof-mounted bike rack, part number RKY0438. With the Thule Crossroads roof rack system on our vehicle, well begin our test fit by placing the bike rack up onto the vehicles load bars. Well then remove the black plastic cover at the front, as well as removing the skewer to access the two Allen bolts. Well remove the two Allen bolts at the front of the carrier to position the gold bracket around the underside of the front bar. Well then reinstall the Allen bolts, keeping them loose.Now, moving to the rear, well remove the black wing nut to position the bracket around the underside of the rear bar. Well install the gold bolt into the holes, and reinstall our black wing nut, tightening it down.



Swagman Fork Down Roof Bike Rack Review - 2013 Toyota Sienna

Today on our 2013 Toyota Sienna well be test fitting the Swagman Fork Down roof mounted bike carrier, part number s64710. With a Thule Aeroblade roof rack system assembled onto our vehicle, well begin our test fit by placing the Swagman directly onto our load bars. Here at the front platform, well take our u-bolts and bring them up through the platform making sure that they go around the underside of our front load bar. Then we can use two wing nuts to tighten it in place. Well do this for both sides of the front platform. Here at the rear, well take the u-bolt and drop it through the top of the bike carrier making sure that the u-bolt goes around our rear load bar.



Thule Circuit Roof Bike Rack Review - 2012 Toyota Sienna

Today on our 2012 Toyota Sienna, we're testing the Thule Circuit roof mounted bike carrier, part number TH526. With the factory roof rack system assembled onto our vehicle, we'll begin our test set by placing the circuit directly onto our crossbars. We'll lift up the cam action lever at the front and bring our front clamp around our front bar. We'll put the bolt in the appropriate spot in the underside of the clamp and tighten using a wing nut. We'll get it hand tight and then close the cam action lever to finish securing the front part of our bike carrier. Now we'll move to the rear, bringing our rear clamp around our rear crossbar.



Swagman Fork Down Roof Bike Rack Review - 2012 Toyota Sienna

Today, on our 2012 Toyota Sienna, we'll be test fitting the Swagman Fork Down, fork style roof mounted bike carrier, part number S64710. To begin our test fit, we'll place the carrier directly under our crossbars. We'll start at the front by bringing the u-bolt brackets up underneath the crossbar and through our bracket platform. We'll secure it by tightening down two wing nuts. We can repeat the same process for the other side of the bracket platform. Once we have those tight, we'll move to the rear, we'll drop our u-bolt through our bike carrier, making sure it goes around our crossbar and through our black bracket, tightening and securing with our wing nuts. Once we have that tight, we can make sure that the wheel strap at the rear is undone and that our skewer at the front is loose.



RockyMounts TieRod Stretch Roof Bike Rack Review - 2012 Toyota Sienna

Today, on our 2012 Toyota Sienna, we'll be test fitting the Rocky Tie-Rod Stretch Roof Mounted Bike Carrier, part number RKY1011. To begin our test fit, we'll place the carrier directly under our crossbars. We'll bring the rubber coated straps at the front around our front crossbar fitting them back into the head of the carrier. We'll then use an Allen key to tighten the bolt which will then tighten the straps. We can go ahead and replace our black plastic cover. We'll move to the rear and bring our rear bracket around our rear crossbar. Feed the bolts through and tighten with an Allen key.





Toyota Sienna Hitch Bike Racks Questions

  • We have installed Curt trailer hitch # C13105 on a 2012 Toyota Sienna and found that from the center of the hitch pin hole straight back to clear the rear bumper measured 5-1/2 inches. On the Thule Apex swinging rack # TH9027, from the center of the hitch pin hole to the anti-rattle knob portion is 4 inches so it would interfere with the bumper. What I recommend is the Thule Vertex swinging rack, # TH9031XT. This rack does not have that anti-rattle knob so it would fit without...
    view full answer...

  • To determine which bike rack would fit the best on your 2009 Toyota Van you will need to measure from the center of the hitch pin on your hitch out to the furthest point out on the rear of your vehicle. The Kuat Rack # N101 has a distance of 9-1/2 inches from the center of the hitch pin out to the nearest upright portion of the rack, whereas the Thule T2 Bike Rack # TH916XTR has a distance of 7-7/8 inches from the center of the hitch pin out to the nearest part of the pivoting...
    view full answer...

  • Yes, the frame adapter is the Thule Womens and Alternative Frame Bike Adapter Bar, part # TH982. This adapter bar works for children, womens, or alternative frame bicycles and allows your to mount the bike level on your Thule Apex 5 Bike Carrier, part # TH9026. The Thule Womens and Alternative Frame Bike Adapter Bar, part # TH982XT, will work great with your Thule Apex 5 Bike Carrier, part # TH9026 on your 2004 Toyota Sienna with 2 inch hitch. I have linked a video overview...
    view full answer...

  • First, to use the Thule Parkway 4 Bike Hitch Mounted Folding Rack, # TH956, you would need to add a trailer hitch to your 2006 Toyota Sienna. I recommend the Hidden Hitch Trailer Hitch, part # 87415. This hitch has a 2 inch receiver opening that is compatible with the Thule Parkway or any other 2 inch bike rack. With a 2 inch hitch, there is a wider selection of bike racks and hitch accessories that you can use. One thing to consider is the distance from the center of the...
    view full answer...

  • Since you want to carry at least three bikes with the 2002 Toyota Corolla the only option for that would be a trunk rack since the only hitches available for this vehicle are Class I which can only carry up to 2 bikes. For a three bike trunk rack confirmed to fit this vehicle check out the Hollywood Racks Expedition part # HRF6-3. This rack only weighs 20 lbs and would do well for you. Check out the review video I attached for more info. Now for the 2011 Toyota Sienna you...
    view full answer...

  • As long as you have a Class III hitch with a 2 inch opening like the Draw Tite hitch part # 36513 on your 2011 Toyota Sienna the Yakima SwingDaddy 4-Bike Rack # Y02464 that you referenced would work great for you. This rack is a great rack that will swing out and give you complete rear cargo access with bikes loaded. I attached a review video for you to check out as well. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may...
    view full answer...

  • First, for a hitch, when given the choice I always recommend a 2 inch over a 1-1/4 inch. In addition to the higher capacity, a 2 inch hitch will offer you more options for accessories like bike racks and cargo carriers. I recommend the Hidden Hitch trailer hitch # 87586. We have installed this hitch on a 2012 Sienna and on it the measurement from the hitch pin hole back to clear the rear bumper was 4 inches. This is important for choosing accessories. I have linked a video and...
    view full answer...

  • I believe the hitch in the video in question is Curt hitch # C13105. The Draw-Tite hitch # 75696, and Hidden Hitch # 87586 both have a J-pin hole in front of the regular hitch pin hole. The hitch in the video, linked for reference, does not have a J-pin hole which would indicate it is likely the Curt hitch. When we installed these hitches on a 2013 Sienna the Curt hitch was 6 inches from the center of the hitch pin hole to the rear edge of the bumper and the Draw-Tite and Hidden...
    view full answer...

  • Beginning with a hitch, I'd recommend the Curt Class III, part # C13105. I'll link you to installation instructions and an install video showing the hitch being installed on a 2013 Sienna. The procedure for your 2014 model would be almost identical. For a bike rack, I've got an alternative suggestion for you. Take a look at the Softride Dura Parallelogram, part # SR26247. The Dura tilts away from the vehicle, allowing your rear hatch to fully open, as you can see in the product...
    view full answer...

  • The hitch on the Toyota Sienna does sit low. The Kuat NV4 bike rack # N101-103 platforms will be up several inches higher but on an incline steep enough or if you hit a bump or dip the right way, because the rack is so long, you may still see scraping on the bottom of the rack. The rack can fold up as you can see in the pictures and it can also tilt down. However, it differs from vehicle to vehicle on whether or not you can open the rear hatch withe the rack titled and the...
    view full answer...

  • To install a bike rack on your 2014 Toyota Sienna, you'd first need to install a trailer hitch, if you don't have one already. The Curt Class III trailer hitch, part # C13105 would be an excellent choice. The Class III hitch uses the more common 2 inch receiver opening, which would give you a better selection of hitch mounted accessories like a bike rack like the Thule Hitching Post Pro # TH934XTR or a cargo carrier like the Curt # C18153. For carrying 4 bikes, you cannot go...
    view full answer...

  • The Thule Helium, # TH9042, tilts down but it does not swing off to the side and you cannot leave the bikes on the rack when tilting down. A rack like the Element, # SR26248, will allow you to keep the bikes on it while tilting down. We do offer swinging bike racks like the Thule Apex, # TH9027, that will swing off to the side and you can leave the bikes on it. The swinging bike racks only fit a 2 inch trailer hitch receiver. The Element fits a 1-1/4 inch or 2 inch receiver. I...
    view full answer...

  • I do have a solution for you, the Hidden Hitch part # 87586 that is confirmed to fit your 2012 Toyota Sienna sticks out an additional 1-1/2 inches than the Curt Hitch part # 13105 so it should work well for you to carry the Yakima FullSwing 4 Bike Rack part # Y02465. Check out the install video I attached for the hitch and review video for the rack. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing...
    view full answer...

  • The Curt 2-inch hitch # C13105 on your 2005 Toyota Sienna AWD has a substantial 350-lb tongue weight rating which makes it ideal for high-capacity bike carriers like the Swagman # S64691. The weight of carriers like this can approach 90 lbs, and with the addition of 4 bikes (depending on their type and weight) you could easily approach 250 lbs total tongue weight. A good starting point for determining fit compatibility is to take a measurement of your vehicle hitch position....
    view full answer...

  • We do have options to both tow your pop-up camper and to carry 4 bikes at the same time, but you will not be able to raise the ball height using the Swagman 4-Bike Towing Rack # S64675 on your 2006 Toyota Sienna. The bike rack I recommend is the Swagman Pop Up Camper Roof Mount 4 Bike Rack # S80550. It carries up to 4 bikes and mounts on the roof of most pop-up trailers and features foam bumpers to help prevent wear and tear on the campers roof and adjustable tire rails to...
    view full answer...

  • The distance from the center of the pin hole to the edge of the closest wheel loop is 12 inches on the Hollywood Racks Sport Rider SE bike rack # HR1400. Based on the hitch install we did on a 2005 Toyota Sienna, the distance from the pin hole to the edge of the bumper was around 6 inches, so you should have enough clearance to use the Sport Rider SE rack. Double check this measurement on your Sienna in case there are any variances. I am including links to the installation...
    view full answer...

  • On the Swagman Titan, # S63410, the single bike capacity is 35 pounds. The capacity of the rack as a whole is 100 pounds. So if you had four 30 pound bikes loaded that would exceed the capacity of the rack, you are correct. We have other 4 bike racks that can accept more weight. The Thule Vertex, # TH9029XT, for example can handle 140 pounds total (35 pounds per bike). But with its straight shank, the Vertex is not going to offer any additional ground clearance. I have included...
    view full answer...

  • I have a solution that will enable you to carry 4 bikes on your 2008 Toyota Sienna that allows you to fold the bike rack up when not in use. For a trailer hitch, I recommend the Curt # C13105. This hitch has a measurement from the center of the hitch pin hole to the outermost edge of the bumper of 4 inches. This hitch has the shortest distance available at this time. I have attached a brief installation video on a 2007 Sienna. You are correct about the Swagman XTC4 # S64665...
    view full answer...

  • There is not much clearance from the center of the hitch pin hole to the anti-rattle knob on the Thule Apex swinging bike rack # TH9027, only 4-1/4 inches. You will need to measure the distance from the center of the hitch pin hole straight back to the distance required to clear the rear bumper. It is is less than 4-1/4 inches then you can use the Apex. I included a picture with some important measurements for you. Another option besides the Vertex, # TH9031XT, is the Yakima...
    view full answer...

  • The arm on the SportRack Single Arm Bike Rack, # SR2604, does not fold down, the arm is stationary. Because of this design, you would not be able to fold the arm down. For a bike rack that does have folding arms, I recommend looking at the Thule Parkway 4 Bike Rack, # TH956. This bike rack would be an excellent choice and the price difference is small compared to the added convenience, see video link. You might also check out the Yakima DoubleDown, # Y02424, which will fit...
    view full answer...

  • Only the SNug-Tite lock, # THSTL2, should be used with the Thule Vertex, # TH9030XT. Bike rack manufacturers usually make their locks, or more specifically the threaded bolt, unique to their bike racks so most of the locks do not interchange among brands. The best solution is to always stick with the item you know is going to work. In this case the Snug-Tite lock.
    view full answer...

  • You should not have any issue using the Thule Apex Swing 4 Bike Carrier, # TH9027, on your 2009 Toyota Sienna. I spoke with my contact at Thule and this bike rack weights 53.5 lbs and has a weight capacity of 140 lbs. Even at maximum load this rack is well under the tongue weight capacity of your hitch. You should also check the tongue weight capacity of your vehicle and never exceed the capacity of the lowest rated tongue weight. I would also recommend the Thule Bike Adapter...
    view full answer...

  • Any time you use a hitch adapter to go from a 1-1/4 inch hitch to a 2 inch hitch you cut the capacity of the hitch in half, so we generally try to avoid that as much as possible. Adapters like this also create more movement and noise in the hitch which can be annoying. For you 2006 Toyota Sienna there is a Class III hitch with a 2 inch opening available that would be your best option for carrying a bike rack intended for a 2 inch hitch. I would recommend you go with the...
    view full answer...

  • I spoke with my contact at Yakima and they do not make a longer zip strip for the SwingDaddy, # Y02464, but I do have a solution for you. I recommend using the Swagman Easy-Out Bike Adapter Bar, # 64005. Not only will this allow you to secure your Electra Tiger Shark Cruiser to the rack but it will allow you to do so without touching the frame. Check out the video that I have attached.
    view full answer...

  • We have tested the Yakima FullSwing 4 Bike Rack, # Y02465, on a 2012 Toyota Sienna and the bike rack did not hit the bumper, but it was pretty close. I have attached the video for you to check out. We have not received any complaints from Sienna owners that these bike racks have hit their bumper, but bumper clearance will also depend on the brand of the trailer hitch that is installed on the fan. For example, A Curt trailer hitch for the Sienna is more recessed under the bumper...
    view full answer...

  • Yes, you can use the Thule T2 bike rack, # TH917XTR, on your 2013 Toyota Sienna. This particular rack fits in a Class I or II trailer hitch with a 1-1/4 inch hitch. If you have a 2 inch hitch, Class III or higher, on your Sienna then you would use # TH916XTR which is the same rack only for 2 inch hitches. I have linked videos for both racks for you.
    view full answer...

  • The Thule Hitching Post Pro bike carrier # TH934XTR does fit both 1-1/4 inch and 2 inch trailer hitches using the included sleeve that fits on the bike carrier shank. With the adapter sleeve on it fits 2 inch hitches. If given the option of a 1-1/4 inch or 2 inch hitch I always recommend the 2 inch hitch. A 2 inch trailer hitch is going to be sturdier and have more accessory options than 1-1/4 inch hitches. And since this carrier has a threaded hitch bolt to limit movement...
    view full answer...

  • In order to determine if there is sufficient room for the folding option of a rack to work, you'll need to start by taking a quick measurement from the hitch pin hole to the outer most edge of the bumper on your Toyota Sienna. I have attached an article which will walk you through this. Once you have this measurement you will want to choose a bike rack which has a greater distance from the hitch pin hole to the nearest part of the rack when folded up. This measurement is typically...
    view full answer...

  • Since you have a Class II trailer hitch with a 1-1/4 inch receiver, there is only 1 bike rack option if you wanted a 5 bike rack. Take a look at the Yakima RidgeBack 5, # Y02459. This rack can hold 5 bikes and it fits either a Class II, 1-1/4 or Class III, 2 inch trailer hitch receiver. It has a straight shank so if you where to measure from level ground up to the bottom of the receiver opening, that will tell you the amount of ground clearance there will be. The arms and...
    view full answer...

  • I walked out to our warehouse, pulled part # S64351 and assembled it. I measured the distance from the center of the hitch pin hole to the center of the lowest bar mount on the top of the bike rack and it measured 40 inches. So you will need to measure the distance from the ground to the center of the hitch pin hole, then add 40 inches to that distance, which will give you the height that the cross bar on your bicycle will be at. While your bike is on the ground, measure...
    view full answer...

  • The Hollywood Racks Sport Rider SE Carrier, # HR1450R, with Trike Adapter, # HRTRK-ADP, would be a great option for carrying your adaptive tricycle. This easy to use platform style rack with padded hooks and adjusting wheel mounts fits 2 inch hitch receivers and will carry a trike with a wheelbase up to 74 inches, width up to 36 inches, and tire width maximum of 3 inches. As an added bonus, a hitch lock and 8 ft long cable lock are included for increased security. Just a reminder,...
    view full answer...

  • The trailer hitch that I recommend for your 2011 Toyota Sienna is the Curt Class III Trailer Hitch, # C13105. This trailer hitch has a 2 x 2 inch receiver which is compatible with most hitch mount accessories. I have attached installation instructions and our installation video for you to check out if you plan on performing the install yourself. For the bike rack, you have two different style options. We offer the platform style bike racks like the Thule T2 Bike Rack, # TH916XTR....
    view full answer...

  • To use the Swagman Quad # S64691 bike rack on your 2011 Sienna, you'll first need to install a Class III trailer hitch receiver. The Curt # C13105 would be a fine choice. The installation is pretty straightforward. I'll link you to the installation instructions and an install video. By reading the instructions and watching the video, you should have a pretty good idea if the install is something you'd feel comfortable attempting yourself. Once the hitch is installed, the...
    view full answer...

  • The Swagman Semi 4.0 4-Bike Platform Rack # S64696-97 that you referenced has a shipping weight of 120 lbs. So it's actual weight will be just a few lbs lighter minus the shipping materials. Check out the review video I attached for this rack.
    view full answer...

  • The Yakima HoldUp 4 Bike Rack # Y02443-2 that you referenced weighs right at 104 lbs. I attached a review video for this rack for you to check out as well.
    view full answer...

  • If you are interested in being able to have rear cargo access on your 2012 Toyota Sienna with a Curt Hitch part # C13105 installed I have a solution for you. Check out the Thule Apex Swing 4 Bike Carrier # TH9027. This rack can swing out with bikes loaded to give you complete rear access to the cargo area of your vehicle. I attached a review video of this rack on a 2012 Sienna like yours for you to check out as well. If you plan on carrying any womens or alternative framed...
    view full answer...

  • The only bike rack we have that will accommodate a trike as well as a two wheeled bike is the Hollywood Racks Sport Rider SE2 # HR1450R-TRKADP2. This hitch mount bike rack will hold one trike and one two wheel bike. The maximum trike track width this carrier will hold is 36 inches. The weight capacity of this bike rack is 100 pounds. It has a built-in anti-rattle device, with an easy-to-access handle on the front of the carrier. This rack also comes with an 8 foot cable lock to...
    view full answer...

  • It is easy to check if the ProSeries Q-Slot Platform 2/4 Bike Rack # PS63138 will fit the hitch on your 2014 Toyota Sienna. Your 2014 Sienna could be fitted with either of two hitch sizes, either a 1-1/4-inch Class II or a higher-capacity 2-inch Class III hitch. The linked articles on hitch sizes and classes show how to measure your receiver opening. In order to use the ProSeries Q-Slot bike rack as a 4-bike carrier you need to have a 2-inch hitch on the Sienna, such as the...
    view full answer...

  • We may have a solution for you, but we do not offer any bike carriers that can handle the weight of the bikes you said you need to carry. I recommend a Yakima Rack and Roll Trailer, part # Y08107. This trailer can accommodate the bikes you mentioned with no problem and keep your Sienna rear cargo area available. This trailer has a weight capacity of 250 lbs, and the crossbars can be adjusted from a 4 inch to 48 inch spread. The bike rack I recommend for the recumbent bike...
    view full answer...

  • The Pro Series Q-Slot Platform-Style 2 Bike Rack # PS63134 that you purchased has a 1-year limited warranty. The warranty covers any manufacturer defects, but it would not cover damage caused by another car striking the rack. It would seem that the driver of the other car should buy you a new rack as he/she is the one at fault. You might check with your insurance company for more info.
    view full answer...

  • Given that your trailer hitch is close to the ground and that the vehicle will likely sag when loaded and ready to go the Apex # TH9025, might not be the best option. The Apex has a straight shank which means the rack will be no higher than the receiver once installed. There are a couple of solutions. First, if you are set on the Apex, you could use some suspension enhancement to prevent the vehicle from sagging. Timbren springs like # TTORSEN04, would work well for this....
    view full answer...

  • Using a quality trunk-mounted bike rack like the Thule Raceway part # TH9001PRO would be a cost-effective way of transporting two bikes without the expense of installing a hitch on your Sienna. Rather than the buckles and strap other racks use to attach to the vehicle, the Raceway uses 4 ratcheting cables that allow the rack to be installed or removed in seconds. If you would prefer a hitch mounted bike rack, hitches are available for your Sienna. The Curt Class III receiver,...
    view full answer...

  • I have exactly what you need. Check out the Brophy Hitch Reducer part # HT02. This a metal hitch reducer that will let you use your 1-1/4 inch bike rack in the 2 inch hitch that is on your 2014 Toyota Sienna.
    view full answer...

  • Yes, the Hidden Hitch part # 87586 would be the correct hitch to get for your 2011 Toyota Sienna that would allow you to install the Thule Apex Bike Rack part # TH9027. Check out the review video I attached that shows this rack being demoed on a similar Sienna as yours. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike Adapter # 64005 to...
    view full answer...

  • You could raise the bike rack using multi-pupose ball mount # D210. It has an upper receiver that is 3-9/16 inches higher measured from the top of the receiver opening to the bottom of the raised receiver on the ball mount. The benefit of using this ball mount is that it will not reduce the tongue weight capacity of the hitch like other products would. The Yakima SwingDaddy, # Y02464 would not offer any additional ground clearance because the shank comes straight out of the...
    view full answer...

  • Yes, when folded down the Hollywood Racks Sport Rider SE 4-Bike Carrier # HR1400 that you referenced will have enough clearance for you to open the rear door without bikes loaded. The reason I know this is because we tested the 2 bike version of this rack part # HR1450 on a 2013 Toyota Sienna like yours and it had plenty of clearance when folded down for the door to open. I attached the review video for this product for you to check out that shows this. For a bike rack that...
    view full answer...

  • For your 2007 Toyota Sienna I recommend the Curt Class lll Round Tube Hitch, part # C13105. This hitch has a 2 inch receiver opening and is a good fit for your vehicle. I have attached an installation video for this hitch on a 2007 Sienna. In the video the measurement is taken for clearance from the rear of the bumper. It is 4 inches. If it is ground clearance you are concerned with when this hitch is installed it measures 10-1/4 inches from the ground to the top of the...
    view full answer...

  • The Pro Series Q-Slot Platform-Style 2 Bike and 4 Bike Carrier # PS63138 will most likely work fine for you. The rear of the 2008 Sienna looks like it has a slightly flatter profile than the 2013 in the video you reference, which means your bikes' handlebars should not come into contact with your vehicle. After reviewing the video you reference, it looks like the bike is very close but not actually touching the vehicle. Taking a few measurements will give you an approximate...
    view full answer...

  • The suspension enhancement is going to help prevent any sag when the vehicle is loaded and hopefully it will be enough for you to avoid having to load and unload out in the street! There aren't an overwhelming amount of options for 5-bike racks, see link. I would go with the Vertex, # TH9030XT personally but I do have another option you may not have considered. If you are able to keep just one of the bikes, the smallest one, inside the van, then you could use the swing...
    view full answer...

  • Your 2002 Toyota Sienna can be equipped with two classes of hitch, either a 1-1/4-inch Class II type or a 2-inch Class III. The Hollywood Racks Recumbent Bike Carrier # HR1000R that you are purchasing will fit BOTH sizes of hitch, but for broad compatibility with accessories and safety margin I suggest a Class III hitch. The link provided will show you all 2-inch Class III hitches for your 2002 Sienna. I suggest the Draw-Tite hitch # 75120 for its 350-lb tongue weight capacity....
    view full answer...

  • The hitch that was installed on the 2013 Toyota Sienna in the video you referenced was the Hidden Hitch part # 87586. Check out the video I attached that shows this hitch being installed on this vehicle. Since we were able to fit the Thule Apex Swing 4 Bike Rack # TH9027 on your vehicle with this hitch I would recommend you get both the Hidden Hitch and the Apex as both are great products. The Hidden Hitch # 87586 is a Class III hitch with plenty of capacity that would carry...
    view full answer...

  • Yes, the Hollywood Racks Sport Rider SE Platform 4 Bike Rack with Cargo Carrier, # HR1400-85, will fit on your 2015 Toyota Sienna as long as it is equipped with a 2 inch trailer hitch receiver. Please keep in mind that you will be bound by the component with the least weight capacity so before loading up and getting ready to go, we will want to determine each component's capacities. Bike Rack = 45 lbs per bike. Cargo Basket = 220 lbs when used alone or 90 lbs with bike...
    view full answer...

  • The only style of bike rack that is going to fit your recumbent is going to be a fork mounted roof rack since all of the usual attachment points on the bike are not easily accessible. Since your wheel span is pretty short a standard roof bike rack would work like the part # Y02098. For the rest of the bikes a platform bike rack like the # Y02469 would work great. Or for a rack just for 3 bikes part # TS03G.
    view full answer...



Toyota Sienna Roof Bike Racks Questions

  • The Rooftop Bike Carrier, item # S64720, comes with two sets of U-bolts to attach the carrier to your factory cross bars. The smaller size U-bolts measure 2 inches by 2 inches so your cross bars would have to be less than 2 inches thick and 2 inches wide or less. The larger U-bolts are 2 inches by 3-1/4 inches and your cross bars would have to be less than 2 inches thick and 3-1/4 inches wide or less. The Distance between your cross bars can be no less than 28 inches to use...
    view full answer...

  • The Thule Tandem Roof Mounted Bike Rack # TH558P that you referenced is only confirmed to fit square Thule and round Yakima bars, it would not fit on the factory cross bars of your 2012 Toyota Sienna. You would first need a roof rack, I would get the Thule Roof Rack # THLB58 and # TH450. Once installed you would be able to put the # TH558P on your roof. I attached a video of this product on a very similar Toyota Sienna for you to check out also. You will not need to remove...
    view full answer...

  • The answer to your question will depend on the both the width of your bikes at their widest point and the weight capacity of your existing roof rack. If your Sienna has the factory roof rack, the capacity should be listed in the owners manual. If you are using an aftermarket rack, you will need to check with the manufacturer. Each rack weighs around 6-1/2 lbs. Make sure that the weight of the three racks plus the bikes does not exceed the weight capacity of the roof rack. I...
    view full answer...

  • The Sport Rack Roof Bike Rack - Frame Mount # SR4611 is not considered a custom fit item. It is designed to fit most factory crossbars, and will work on crossbars that are up to 3-1/2 inches wide. So if your crossbars are less than 3-1/2 inches this should work for you. It also requires a crossbar spread of 24 to 34 inches, so please check to make sure that your crossbars can accommodate this measurement too. How many you can fit on the roof rack of your 2008 Toyota Sienna...
    view full answer...

  • In order to use the Thule Tandem Roof Mounted Bike Rack # TH558P on your 2004 Toyota Sienna you will need to first install a Thule Roof Rack. To do that you will need the following components: Thule Square Load Bars # THLB50 Thule Crossroad Roof Railing Foot Pack # TH450 Once you have the Thule roof rack installed you would be able to install the # TH558P. I checked with Thule to confirm all of this. Check out the review video I attached for the # TH558P. I attached...
    view full answer...

  • Check the weight capacity of the roof in your vehicle owner manual, but you should be able to fit two of these on your 2005 Toyota Sienna. The limiting factor is not these carriers, but rather the bikes themselves. Be aware of how wide the handle bars are and make sure they will not interfere with each other.
    view full answer...

  • The Yakima FrontLoader Roof Bike Rack, # Y02103, and the Raptor Aero Bike Rack, # Y02093, were designed to fit most factory crossbars like that on your 2009 Toyota Sienna. I have attached the installation instructions for these bike racks for you to check out.
    view full answer...

  • The SportRack roof bike rack # SR4882 is a confirmed fit for your vehicle. As for the number of bikes, check the weight capacity of the roof of your vehicle owners manual, but you should be able to fit two of these on your 2008 Sienna. The limiting factor is not the carrier, but the bikes themselves. Be aware of how wide the handle bars are and make sure they will not interfere with each other. You could possibly fit three bikes if the capacity allows it and the bikes face...
    view full answer...



Toyota Sienna Trunk Bike Racks Questions

  • You are correct, Thule does recommend the Thule Raceway Trunk Mount 3 Bike Carrier, item # TH9002PRO, for your 2004 Toyota Sienna. I recently had the chance to install this rack on a vehicle, not a mini van, and it is the easiest to install trunk mount rack that I have used. If you will be using the bike rack on different vehicles or might be getting a new vehicle in the near future, this is the rack I would recommend, and it will safely carry your bikes, see video link. One...
    view full answer...

  • The Thule Passage 3 Bike Rack part # TH911XT that you referenced is confirmed to fit your 2007 Toyota Sienna and would work well for you. Check out the review video I attached. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike Adapter # 64005 to provide a horizontal top tube on your bikes to provide an attachment point. I attached a review...
    view full answer...

  • I do have a bike rack solution for you but trunk mount bike racks will not fit the 2011 Toyota Sienna because the vehicle can not support the weight of a rack and bikes at the points where it would have to mount to the van. The remaining options are a roof rack or a hitch. A trailer hitch is the more cost effective and safest option and the bikes will be easier to load. You could also use the hitch to tow if you ever needed to or carry a cargo carrier. For a trailer hitch...
    view full answer...

  • The Thule Passage Two-Bike Trunk Mounted Bike Rack you referenced, part # TH910XT is indeed a fit for your 2009 Toyota Sienna. I have also linked you to the rest of the trunk mounted racks that would be a fit for your vehicle. You might also want to take a look at the Raceway 2 bike model, part # TH9001PRO. Instead of 6 straps and buckles used to attach the rack to the vehicle, the Raceway uses 4 ratcheting cables that are much easier to use. Simply spool out the cables, attach...
    view full answer...

  • To carry 3 bikes on a trunk mount bike rack on your 2011 Toyota Sienna you can use the Hollywood Racks Over-the-Top rack # HRF2-3. This rack has an additional upper arm piece that moves the top straps up and over that spoiler so no weight is put on it (since the spoiler is not meant to support weight). I have included a link to a video that shows how it works. If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's...
    view full answer...

  • According to both Yakima and Thule, your 2011 Toyota Sienna is not suitable for use with a strap-mounted bike rack. The rear hatch of the vehicle is not strong enough to support the weight of the rack and the bikes placed upon it. Your best option would be to install a receiver hitch and use a hitch mounted bike rack. For your 2011 Sienna, I would recommend the Curt Class III Receiver, part # C13105. For a two bike rack at the inexpensive end of the spectrum, the Rola TX-102...
    view full answer...

  • Rhode Gear was bought by Yakima some years back and their vehicle fit guide information ceased well before your 2010 Toyota Sienna was produced. I contacted Yakima and they are unable to confirm a fit. This does not necessarily mean that the rack won't work for you, only that Yakima cannot provide absolute certainty. You can test-fit the rack if you wish and determine if it fits to your satisfaction. Usually if a Yakima-brand rack fits your vehicle, then the Rhode Gear rack will...
    view full answer...

  • I checked with Thule and for your 2006 Toyota Sienna and your 2007 Lexus ES 350 I would recommend the Thule Raceway part # TH9001PRO. The spoiler of your Sienna would not be an issue. What makes this rack far superior to the others is the attachment system. It uses 4 retractable coated steel cables to attach to the vehicle rather than 6 nylon straps like other racks. This makes installation quick and easy and the cables also last longer. The cables store inside the rack...
    view full answer...

  • For a 3-bike rack to fit both your 2004 Pontiac Grand Prix with factory spoiler and your 2002 Toyota Sienna van, I would recommend the Yakima KingJoe 3 Bike Trunk Rack, item # Y02620. If the spoiler on your Grand Prix is not the factory option, the KingJoe rack will not fit. The Thule Speedway 3 Bike Carrier, item # TH911XT, will work on your 2002 Toyota Sienna van, but is not recommended for use on the Grand Prix with rear spoiler.
    view full answer...

  • We do have an option that will allow you to carry 4 bikes on your 2012 Toyota Sienna, however, trunk mounted bike racks are not compatible with your vehicle because your vehicle is unable to support the weight of the bike rack and bikes at the point where the carrier must be placed. Instead, I would recommend looking into adding a trailer hitch and using a hitch mounted bike rack. For a trailer hitch, we have the Curt Class III Trailer Hitch, # C13105. With this hitch installed,...
    view full answer...

  • Due to the rear spoiler on your 2012 Toyota Sienna there is only one trunk mounted bike rack that has been confirmed to fit your vehicle. Check out the Hollywood Racks Over-the-Top 2 Bike Carrier for Vehicles w Spoilers # HRF2. This rack has been confirmed to fit your vehicle and after having the opportunity to see this rack installed on a vehicle in our install bay I can highly recommend it. If you plan on carrying any womens or alternative framed bikes without horizontal...
    view full answer...

  • Yes, the Yakima KingJoe Pro, # Y02625, will fit your 2007 Toyota Sienna. I have also included a link to all of the trunk mount bike racks that will fit your van. If you will be carrying womens, childrens, or alternative frame bikes, I recommend using the Tube Top adapter bar, # Y02531, for greater ground clearance and to carry the bikes more level. I have linked a video that shows how the adapter works.
    view full answer...

  • The Hollywood Racks Over-the-Top 3 Bike Carrier # HRF2-3 will contact the back glass of your 2012 Toyota Sienna, but the majority of the weight of the rack and bikes will not be on the glass. If you are looking for a rack that does not touch the back glass, or the back of your vehicle at all for that matter you would want to go with a hitch mounted bike rack option. To start you will need a hitch. For that I would recommend the Curt Trailer Hitch # C13105. I attached an install...
    view full answer...

  • The Thule Raceway bike rack # TH9001PRO is listed as a fit for your 2007 Toyota Sienna. However, usually the fin or spoiler can be an issue since it is not meant to support any weight. The best solution is a different type of rack, the Hollywood Racks Over-the-Top rack # HRF2. This rack has an additional upper arm piece that moves the straps up and over the spoiler so no weight is on it. I have linked a video that shows how it works. If you will be carrying any bikes that...
    view full answer...

  • For a 2006 Toyota Sienna Thule classifies the Raceway 3 Bike Carrier # TH9002PRO a fit, and is one of our best sellers for your vehicle. Thule considers this bike rack a fit as long as there is not a spoiler installed and according to the Thule fit guide a spoiler was not an option for your specific year vehicle. Thule also recommends if you plan on carrying an alternative frame, womens, or childrens bike, an adapter bar be used, like the # TH982XT. This adapter bar mounts...
    view full answer...

  • The SportRack 2 Bike Carrier, # SR3161, does not have a specific fit guide. However, none of the other trunk mount bike racks will fit a 2011 Toyota Sienna so it is unlikely that this rack will fit. In order to carry 2 bikes you will either need to install a hitch and bike rack or a roof rack and bike racks. I recommend going with a trailer hitch because it will be more economical. For a trailer hitch I would go with the hidden Hitch Trailer Hitch, # 87586. This is a Class...
    view full answer...

  • The Saris Bones # SA805 is confirmed to fit your 2013 Toyota Corolla but is not confirmed to fit your 2013 Toyota Sienna. The only trunk mounted bike rack I can recommend that will work on both of your vehicles is the Hollywood Rack Over the Top Bike Rack part # HRF2. Check out the review video I attached for this rack. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Hollywood Racks Bike...
    view full answer...

  • The Hollywood Racks Express 3 Bike Carrier # HRE3 is a cost-effective and lightweight trunk-mount rack that does fit the 2007 Toyota Sienna. The Thule racks that are specified to fit your car are shown on the included link. The most cost-effective of these is their Passage 2 Bike Carrier # TH910XT; a 3-bike version is also offered as part # TH911XT. All three racks share very similar overall design and construction since all are entry-level racks. Any one will work fine for...
    view full answer...

  • We have just the bike rack you need for your 2012 Toyota Sienna. I recommend the Hollywood Racks Trunk Bike Rack, part # HRF2-3. This rack is designed for SUVs, minivans, and cars with spoilers. The upper frame extends up and over the spoiler. This rack can carry 3 bikes weighing up to 35 lbs each. When carrying bikes with alternative frames like kids bikes or women's bikes I recommend using an adapter bar like part # 64005. This attaches between the seat post and the handlebar...
    view full answer...

  • For your 2007 Toyota Sienna with flush rails we have a roof rack option, but it's not from Thule. Instead you would want the Inno roof rack that consists of part numbers # INB127, # INTR, # INTR502.
    view full answer...

  • I did some research online trying to get a good look at the spoiler on the liftgate of that vehicle. Here is the bottom line on minivan spoilers. If there is a gap between the spoiler and the vehicle that would allow the mounting straps to pass through and attach to the top of the door WITHOUT passing over the spoiler, a trunk mounted bike rack could be used. However, since your spoiler does NOT have a gap and the straps or cables would have to pass over the top of the spoiler,...
    view full answer...

  • The Hollywood Over-the-Top bike carrier # HRF2 could probably handle the weight just fine but installation of anything but bikes could cause damage to your vehicle and most likely void the warranty. A option I would consider is the Rightline cargo hatch saddlebag # RL100B90 because it's aerodynamic and rests on the backside of your 2012 Toyota Sienna. The carrying capacity is 13 cubic feet and weight capacity is 100 pounds. I think you will really like this option because of...
    view full answer...

  • We have several different trunk mounted bike racks that would work well with your Sienna (click provided link). I can highly recommend the Thule Raceway 3 Trunk Mounted Bike Rack, part # TH9002PRO. Instead of 6 straps and buckles used by most racks, the Raceway uses 4 ratcheting cables that allow the rack to be installed or removed in seconds. For carrying womens bikes or bikes with sharply angled top tubes or step-through frames on the trunk mounted carrier, using a frame...
    view full answer...

  • There are several different trunk mount bike rack options available for your 2004 Toyota Sienna as long as it does not have the plastic spoiler at the top of the rear hatch. I have attached a link to all of the 3-bike options for you to check out. The Saris Bones bike rack that you referenced is available in a 3-bike version as part # SA801 and it will fit your Sienna as long as it does not have a spoiler. If your Sienna has a spoiler, then I can only recommend the Hollywood...
    view full answer...

  • Yes, the Yakima KingJoe Pro 2 Bike Rack, # Y02624, will fit both the 2013 Kia Rio and your 2000 Toyota Sienna minivan. No additional parts are needed when using the rack. I have attached a demo video of the bike rack on the Rio. If you will be carrying any women's, children's or alternative frame bikes, I recommend picking up the Yakima Tube Top Bike Adapter Bar, # Y02531. Bikes with small or angled frames can be difficult to load on hanging style bike racks and they can...
    view full answer...

  • It will be easier to load 2 bikes onto a 3-bike carrier so I recommend looking at the 3-bike models. There are many options that will fit and I have included a link to them for you. In terms of the best fit you will want to look at carriers that have arms, top and bottom legs that all move independently from each other. This will allow the carrier to better fit the contours of the vehicle while holding the bikes level. I recommend the Thule Raceway Pro # TH9002PRO. I own...
    view full answer...

  • I checked with Thule and this Thule Trunk Bike Rack # TH910XT that you referenced will work on your 2009 Toyota Sienna. Check out the review video and installation instructions I attached for you also. If you plan on transporting any womens or alternative framed bikes without a horizontal top tube you may also be interested in purchasing a Thule Womens and Alternative Frame Bike Adapter Bar # TH982XT to provide a horizontal top tube for the rack to attach to easier. Check out...
    view full answer...

  • There is a good selection of trunk bike racks available for your 2004 Toyota Sienna. The Yakima Thule Raceway 3 Bike Trunk Mount Rack, part # TH9002PRO you have referenced will fit your Sienna. It can carry 3 bikes and has a weight capacity of 105 lbs. It is a popular Thule model trunk bike rack. Thule also offers three other trunk bike racks for your vehicle. I am including a link to a product page that will list the Thule racks that will fit. If you plan on carrying...
    view full answer...

  • Yes, I checked with Hollywood Racks and the Hollywood Racks Over-the-Top 2 Bike Carrier # HRF2 that you referenced is confirmed to fit your 2012 VW Jetta. Hollywood Racks does mention that your vehicle has a soft bumper so heavier bikes may cause the bumper to disfigure. That is something to keep in mind. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Hollywood Racks Bike Frame Adapter Bar...
    view full answer...












Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com