Top 20 Most Popular Toyota Sienna Ball Mountschange vehicle

#1etrailer.com 2-3/4" Rise or 4" Drop Ball Mount Kit - 6,000 lbs

Rating:
43 reviews

EBMK4

Price:$63.22

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Ball Mount Kit
Standard
Steel

Product Specs:

Rise - 2-3/4 Inch
Drop - 4 Inch
Fits 2 Inch Hitch
Class III
6000 lbs GTW
etrailer

more information      

#2etrailer.com Ball Mount Kit for 2" Hitches - 6,000 lbs

Rating:
127 reviews

989900

Price:$63.00

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Ball Mount Kit
Standard
Steel

Product Specs:

Rise - 2-3/4 Inch
Drop - 4 Inch
Rise - 3/4 Inch
Drop - 2 Inch
Fits 2 Inch Hitch
Class III
7500 lbs GTW
etrailer

more information      

#3Ball Mount 3/4" Rise or 2" Drop, 7,500 lbs

Rating:
259 reviews

2923

Price:$17.20

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Standard Ball Mount
Standard
Steel

Product Specs:

Rise - 3/4 Inch
Drop - 2 Inch
Fits 2 Inch Hitch
Class III
7500 lbs GTW
Hollow Shank
Draw-Tite

more information      

Draw-Tite Ball Mount Review - 2012 Toyota Sienna

Draw-Tite Ball Mount Review - 2006 Toyota Sienna

#4Class II Drawbar 3-1/8" Rise (Kit)

Rating:
43 reviews

36061

Retail:$30.96

Price:$22.95

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Standard Ball Mount
Long
Steel

Product Specs:

Rise - 3-1/8 Inch
Fits 1-1/4 Inch Hitch
Class II
3500 lbs GTW
Draw-Tite

more information      

#5Ball Mount 4-3/4" Rise or 6" Drop, 6,000 lbs

Rating:
25 reviews

80240

Price:$26.95

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Standard Ball Mount
Long
Steel

Product Specs:

Rise - 4-3/4 Inch
Drop - 6 Inch
Fits 2 Inch Hitch
Class III
6000 lbs GTW
Hollow Shank
Hidden Hitch

more information      

Hidden Hitch Ball Mount with 4 Inch Drop Review - 2006 Toyota Sienna

#6Ball Mount Adjustable Fits 2" Trailer Hitch Receiver, 6,000 lbs

Rating:
29 reviews

80412

Retail:$136.47

Price:$94.95

Product Summary:

view all Ball Mounts
Adjustable Ball Mount
Single Ball Mount
Extra Long
Steel

Product Specs:

Rise - 8-3/8 Inch
Drop - 9-5/8 Inch
Fits 2 Inch Hitch
Class III
6000 lbs GTW
Hollow Shank
Hidden Hitch

more information      

#7Cushioned Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 10,000 lbs

Rating:
18 reviews

AMSC10

Retail:$80.18

Price:$69.95

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Standard Ball Mount
Standard
Steel

Product Specs:

Rise - 8-3/4 Inch
Drop - 10 Inch
Fits 2 Inch Hitch
Class IV
10000 lbs GTW
Cushioned Shank
Convert-A-Ball

more information      

#8Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches

Rating:
22 reviews

D900

Retail:$226.11

Price:$135.67

Product Summary:

view all Ball Mounts
Multi-Ball Mount
Adjustable Ball Mount
Three Ball Mount
Super Extra Long
Steel

Product Specs:

Fits 2 Inch Hitch
10000 lbs GTW
Solid Shank
Curt

more information      

#9etrailer.com Ball Mount Kit - Extra-Long - 2-3/4" Rise or 4" Drop - 6,000 lbs

Rating:
3 reviews

EBMK4EL

Retail:$80.04

Price:$67.65

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Ball Mount Kit
Long
Steel

Product Specs:

Rise - 2-3/4 Inch
Drop - 4 Inch
Fits 2 Inch Hitch
Class III
6000 lbs GTW
etrailer

more information      

#10Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs

Rating:
37 reviews

D210

Retail:$87.55

Price:$52.53

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Dual Hitch Receiver
Extra Long
Steel

Product Specs:

Drop - 2-1/4 Inch
Fits 2 Inch Hitch
7500 lbs GTW
Hollow Shank
Curt

more information      

Questions from Toyota Sienna owners about this product

• Will the Curt Multipurpose Ball Mount, # D210 Fit on a 2012 Toyota Sienna SE
  
• To determine if the Curt Multipurpose Ball Mount, # D210, will work in the 2 inch receiver hitch on your 2012 Toyota Sienna SE, you will need to measure from the center of the hitch pin hole on your trailer hitch to the farthest back part of the rear bumper fascia. Standing a yard stick up at the back of the vehicle touching the rear fascia and measuring to the center of the hitch pin hole is an easy way to get this measurement. The # D210 ball mount measures 5-1/2 inches from the center of t
  view full answer...

#11Ball Mount Adjustable Fits 2" Trailer Hitch Receiver, 14" Long

Rating:
7 reviews

80414

Retail:$149.78

Price:$100.95

Product Summary:

view all Ball Mounts
Adjustable Ball Mount
Single Ball Mount
Standard
Steel

Product Specs:

Rise - 8-3/8 Inch
Drop - 9-5/8 Inch
Fits 2 Inch Hitch
Class III
6000 lbs GTW
Hollow Shank
Hidden Hitch

more information      

#12Ball Mount 2-3/4" Rise or 4" Drop - Extra-Long, 6,000 lbs

Rating:
20 reviews

80228

Price:$22.95

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Standard Ball Mount
Long
Steel

Product Specs:

Rise - 2-3/4 Inch
Drop - 4 Inch
Fits 2 Inch Hitch
Class III
6000 lbs GTW
Hollow Shank
Hidden Hitch

more information      

#13Cushioned Ball Mount for 2" Hitches - 10-3/4" Rise - 12" Drop - 10,000 lbs

Rating:
57 reviews

AMSC12

Retail:$81.98

Price:$70.95

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Standard Ball Mount
Extra Long
Steel

Product Specs:

Rise - 10-3/4 Inch
Drop - 12 Inch
Fits 2 Inch Hitch
Class IV
10000 lbs GTW
Cushioned Shank
Convert-A-Ball

more information      

Questions from Toyota Sienna owners about this product

• Trailer Hitch, Ball Mount kit, Trailer Wiring, and Transmission Cooler for a 2007 Toyota Sienna
  
• I can certainly make some recommendations for a towing set up on your 2007 Toyota Sienna. Starting with a trailer hitch, the most popular hitch for your vehicle is Hidden Hitch # 87415. This is a Class III hitch rated for 3,500 pounds gross trailer weight, 350 pounds tongue weight. The trailer you plan to tow is right at this limited. If there is any way you can reduce the weight of the trailer some, it would be more ideal. I have included a link to the installation details and a video showin
  view full answer...

#14Ball Mount 4" Rise or 6" Drop - Extra Long

Rating:
15 reviews

D-28

Retail:$44.95

Price:$26.97

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Standard Ball Mount
Extra Long
Steel

Product Specs:

Rise - 4 Inch
Drop - 6 Inch
Fits 2 Inch Hitch
Class III
6000 lbs GTW
Hollow Shank
Curt

more information      

#15Aluminum Ball Mount 7" Rise or 8" Drop, 6,000 lbs.

Rating:
1 reviews

40384

Retail:$119.16

Price:$85.95

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Standard Ball Mount
Long
Aluminum

Product Specs:

Rise - 7 Inch
Drop - 8 Inch
Fits 2 Inch Hitch
Class III
6000 lbs GTW
Solid Shank
Draw-Tite

more information      

#16Class II Drawbar 5-1/2" Rise or 6" Drop

Rating:
63 reviews

BM96

Price:$29.95

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Standard Ball Mount
Standard
Steel

Product Specs:

Rise - 5-1/2 Inch
Drop - 6 Inch
Fits 1-1/4 Inch Hitch
Class II
3500 lbs GTW
Brophy

more information      

#17Ball Mount 2-3/4" Rise or 4" Drop - Extra-Extra-Long, 6,000 lbs

Rating:
31 reviews

80233

Retail:$46.31

Price:$31.95

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Standard Ball Mount
Super Extra Long
Steel

Product Specs:

Rise - 2-3/4 Inch
Drop - 4 Inch
Fits 2 Inch Hitch
Class III
6000 lbs GTW
Hollow Shank
Hidden Hitch

more information      

Questions from Toyota Sienna owners about this product

• Will Using a Longer Ball Mount Give Me Less Tongue Weight Capacity
  
• Fortunately, this is a case where any lost tongue weight capacity will be negligible (unless you add a severely long ball mount). But you are correct; adding adapters or extensions can cut your tongue weight capacity by 50 percent in many cases. But the good news is for this application, carrying a towing bike rack, you will not have to worry about losing tongue weight capacity. I recommend Ball Mount, # 80233. It measures 16 inches from center hole to center hole. If you need something long
  view full answer...

#18Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs

Rating:
14 reviews

C45015

Retail:$32.12

Price:$19.27

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Standard Ball Mount
Long
Steel

Product Specs:

Rise - 5 Inch
Fits 1-1/4 Inch Hitch
Class II
3500 lbs GTW
Curt

more information      

#19Ball Mount Adjustable with Sway-Control Tab, 6,000 lbs

Rating:
6 reviews

7390

Retail:$217.73

Price:$138.95

Product Summary:

view all Ball Mounts
Adjustable Ball Mount
Single Ball Mount
Standard
Steel

Product Specs:

Rise - 3-3/4 Inch
Drop - 5-1/4 Inch
Fits 2 Inch Hitch
Class III
6000 lbs GTW
Hollow Shank
Draw-Tite

more information      

#20Forged Ball Mount 5" Rise or 6" Drop, 16,000 lbs

Rating:
13 reviews

40332

Retail:$61.91

Price:$49.95

Product Summary:

view all Ball Mounts
Fixed Ball Mount
Standard Ball Mount
Long
Forged Steel

Product Specs:

Rise - 5 Inch
Drop - 6 Inch
Fits 2 Inch Hitch
Class IV
16000 lbs GTW
Solid Shank
Draw-Tite

more information      

Toyota Sienna ball mounts Videos

Hidden Hitch Ball Mount with 4 Inch Drop Review - 2006 Toyota Sienna

Today on our 2006 Toyota Sienna, well be test fitting the Hidden Hitch Ball Mount with four and three quarter inch rise or six inch drop rated at 6,000 pounds, part number 80240. Now to begin, well first need to get our hitch height measurement. To get that measurement, well measure from the top of the receiver tube to the ground. On this hitch, that measurement is 11 and three quarter inches. Now keep in mind that measurement can change due to hitch style, tire size or any accessories that may change your vehicles ride height, so its a good idea to measure yours. Well not go ahead and put our ball mount into the hitch, lining up the hitch pin and installing our pin and clip securing the ball mount to the vehicle.

Draw-Tite Ball Mount Review - 2006 Toyota Sienna

Today on our 2006 Toyota Sienna, well be test fitting the Draw-Tite Ball Mount with three quarter inch rise or two inch drop rated at 6,000 pounds, part number 2923. Now before installing our ball mount, well first need to get our hitch height measurement. To do this, well measure from the inside top edge of the receiver tube to the ground. Now on this vehicle that measurement is 11 and three quarter inches. Now keep in mind that measurement can change due to hitch style, tire size or any other accessories which may change your vehicles ride height, so its a good idea to measure yours. Well now slide the ball mount shank into the hitch, line up the hitch pin hole and install our hitch pin and clip and with that our ball mount is secured to the vehicle in the drop position.

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2006 Toyota Sienna

Today on our 2006 Toyota Sienna, well be test fitting the Convert-A-Ball Cushioned Ball Mount for 2 Inch Hitches with three quarter inch rise or two inch drop. This ball mount is rated for 10,000 pounds. Part number AMSC2. Now to being our test fit well need to get our hitch height measurement. To do this well measure from the inside top edge of the receiver tube to the ground. Now on this vehicle that measurement is 11 and three quarter inches.

Draw-Tite Ball Mount Review - 2012 Toyota Sienna

Today on our 2012 Toyota Sienna well be test fitting the Draw Tite Ball Mount, part number 2923. First we want to go over measurement on the vehicle. We want to measure the hitch height. Thats from the ground to the inside top edge of our receiver tube. Keep in mind that this measurement will differ depending on exact model, tire size or any aftermarket add ons. The hitch height on our particular Sienna with this particular hitch measures in at 12 inches.

Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2012 Toyota Sienna

Today on our 2012 Toyota Sienna, we'll be test fitting the Convert-A-Ball Cushion Ball Mount, part number AMSC4. First, we want to go over measurement on the vehicle. We want to measure the hitch height. That's from the ground to the inside top edge of our receiver tube. Keep in mind that this measurement will differ depending on exact model, tire size or any aftermarket add-ons. The hitch height on our particular Sienna with this particular hitch measures in at 12 inches.

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2012 Toyota Sienna

Today on our 2012 Toyota Sienna, we'll be test fitting the Convert-A-Ball Cushion Ball Mount, part number AMSC2. First, we want to go over measurement on the vehicle. We want to measure the hitch height. That's from the ground to the inside top edge of our receiver tube. Keep in mind that this measurement will differ depending on exact model, tire size, or any aftermarket add-ons. The hitch height on our particular Sienna with this particular hitch measures in at 12 inches.

Toyota Sienna Ball Mounts Questions

• Will Using a Longer Ball Mount Give Me Less Tongue Weight Capacity
  
• Fortunately, this is a case where any lost tongue weight capacity will be negligible (unless you add a severely long ball mount). But you are correct; adding adapters or extensions can cut your tongue weight capacity by 50 percent in many cases. But the good news is for this application, carrying a towing bike rack, you will not have to worry about losing tongue weight capacity. I recommend Ball Mount, # 80233. It measures 16 inches from center hole to center hole. If you need something long
  view full answer...


• Ball Mount Recommendation for a Factory Trailer Hitch on a 2011 Toyota Sienna
  
• On hitches that we have installed on a 2011 Toyota Sienna, we have found that the distance from the center of the hitch pin hole straight back to clear the rear bumper measured approximately 5-1/4 inches. I do not know what the factory installed hitch measurement is, so you will want to measure from the center of the hitch pin hole back to the distance required to clear the rear bumper. The Curt Euro-Style ball mount, # C45572, measures 7-1/4 inches from the center of the hitch pin hole to th
  view full answer...


• Choosing the Correct Ball Mount for a 2008 Toyota Sienna Towing a 2003 Coleman Santa Fe Trailer
  
• To find the correct ball mount for your 2008 Toyota Sienna and 2003 Coleman Santa Fe tent trailer, there are a couple of measurements you will need to take. First, Measure the hitch height from the ground to the top of the receiver opening on the trailer hitch. Make sure your van is parked on level ground. Next, measure the trailer coupler height from the ground to the bottom of the trailers coupler. Again, the measurement is most accurate when on level ground. The trailer will also need t
  view full answer...


• Installing Curt Class III Receiver # C13105 on 2013 Toyota Sienna
  
• I spoke with my contact at Curt Manufacturing who tells me that the C13105 hitch has indeed been tested and is a confirmed fit for the 2013 Sienna. You might be referring to the lip at the rear of the panel that the instructions refer to in step # 4 of the instructions. A portion of this lip will indeed need to be trimmed away to install the hitch. The size of the piece that will need to be removed can vary from vehicle to vehicle. You will need to remove any of that lip that is obstructing t
  view full answer...


• Recommend Ball Mount To Clear Rear Bumper of 2008 Toyota Sienna
  
• We do have a ball mount that should work well for your towing setup, but, the item you referenced, Forged Ball Mount, part # 40332, will not provide the 7 inches of clearance from the pin hole to the edge of the bumper. The item you selected, Titan Ball Mount, part # 45291, cannot be used in the rise position, so it will not work for your towing setup either. A good solution to provide rise to keep your trailer fairly level when towing and to clear your rear bumper would be the Curt Ball
  view full answer...


• Recommended Ball Mount for a 2004 Toyota Sienna LE
  
• The recommended ballmount for your vehicle is part # 2753. This ballmount will place your hitch ball at the most common trailer height for towing with your 2004 Toyota Sienna Van. You may want to double check that this would have the correct height for you, however, because it is just based on the most common trailer height. You may be interested in our information on measuring for the correct ballmount.
  view full answer...


• Recommended Ball Mount for a 2006 Toyota Sienna Ball With a Class II Trailer Hitch
  
• The recommended ball mount for your 2006 Toyota Sienna would have a 2-5/8 inch rise, like Curt ball mount # C45016. This would put the hitch ball at the most common trailer height, but to ensure it will work with your particular setup, I would recommend taking a couple simple measurements. First, measure from the ground to the top of your class II hitch opening. Then, with your trailer level, measure from the ground to the flat bottom of the trailer coupler. The difference between these tw
  view full answer...


• Trailer Hitch, Ball Mount kit, Trailer Wiring, and Transmission Cooler for a 2007 Toyota Sienna
  
• I can certainly make some recommendations for a towing set up on your 2007 Toyota Sienna. Starting with a trailer hitch, the most popular hitch for your vehicle is Hidden Hitch # 87415. This is a Class III hitch rated for 3,500 pounds gross trailer weight, 350 pounds tongue weight. The trailer you plan to tow is right at this limited. If there is any way you can reduce the weight of the trailer some, it would be more ideal. I have included a link to the installation details and a video showin
  view full answer...


• What is the Recommended Ball Mount for a 2005 Toyota Sienna with a 1-1/4 Inch Trailer Hitch
  
• For a Class I or II trailer hitch with a 1-1/4 inch trailer hitch, you must use the ball mount that is recommended by the trailer hitch manufacturer. The reason is that the hitch has been tested with a specific ball mount and it is deemed to be the safest and best option for that vehicle and hitch combination. The only 1-1/4 inch hitch we carry for your 2005 Toyota Sienna is # C12065. The correct ball mount for this hitch is # C45016, and it must be used in the rise position only. It has a ri
  view full answer...


• Will Anderson Alumistinger Ball Mount # AM3507 Fit CURT Hitch on 2013 Toyota Sienna
  
• We have 2 CURT hitch receivers that fit your 2013 Toyota Sienna. The CURT Trailer Hitch Receiver # C13105, a Class III, 2 inch receiver that uses the # 2753 ball mount and provides a 4 inch drop or 2-3/4 inch rise. I have provided a link to instructions on the proper installation of this item and a link to a video showing the installation of this product on a 2012 Toyota Sienna. We also carry the CURT Trailer Hitch Receiver # C12065, a Class II 1-1/4 inch receiver that comes with the CURT Bal
  view full answer...


• Will the Curt Multipurpose Ball Mount, # D210 Fit on a 2012 Toyota Sienna SE
  
• To determine if the Curt Multipurpose Ball Mount, # D210, will work in the 2 inch receiver hitch on your 2012 Toyota Sienna SE, you will need to measure from the center of the hitch pin hole on your trailer hitch to the farthest back part of the rear bumper fascia. Standing a yard stick up at the back of the vehicle touching the rear fascia and measuring to the center of the hitch pin hole is an easy way to get this measurement. The # D210 ball mount measures 5-1/2 inches from the center of t
  view full answer...

Do you have a question?

Have a question about the best ball mounts for your Toyota Sienna? click here.