Today on our 2013 Toyota Corolla well be test fitting the Thule Flat Top Ski and Snowboard Carrier, part number th92725. Now with our roof rack system already assembled on our vehicle, well begin our test fit by placing the front part of the carrier onto the front crossbar. Well loosen up the straps by loosening up the gray knob. Well then bring the rubber-coated steel straps around the underside of the crossbar and hook them into position. Well then turn the gray knob to tighten down the steel straps to secure the front part of the carrier to the front crossbar. Well then place the rear part of the carrier onto the rear crossbar.
Today on our 2012 Toyota Corolla were going to be test fitting the Thule Flattop Ski and Snowboard Carrier, part number TH92725. To mount our carrier to our vehicle well take the first half of the carrier and set it up on top of our front load bar. Well feed the speed link strap around the bar and resecure it to the head. Then well tighten it down using the gray hand knob. With both sides of our front half secure well grab the second half and place it on top of the rear load bar. We do want to make sure that the second half of the carrier lines up properly with the front half.
Today on our 2011 Toyota Corolla well be test fitting the Thule Flat Top ski and snowboard carrier part #: th92725. Now, our vehicles already equipped with a roof rack system so were ready to go ahead and mount our ski carrier. Well place our front carrier directly over the top of the front crossbar and bring the rubber coated steel straps underneath the bar and secure it back to the carrier. We can then tighten it down using the wing nut in the front of the carrier. And that will secure our front carrier. We can now move on to the back carrier.
Do you have a question?
Have a question about the best ski and snowboard racks for your Toyota Corolla? click here.