Top 20 Most Popular Toyota 4Runner Cargo Carrierschange vehicle

Curt Folding Hitch Cargo Carrier Review - 2007 Toyota 4Runner

Today, on our 2007 Toyota 4Runner, we'll be test fitting the Curt 20 x 60 Folding Cargo Carrier part number C18132. To begin our test-fit, we'll slide the shank of the carrier into the opening of the receiver tube. Align the pin hole, slide the pin through the pin hole and secure with the clip. Now, lets go over some clearance measurements to see how the cargo carrier and this vehicle will fit together. With the cargo carrier folded up, there's about 15 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about four inches.

Curt 20x60 Folding Aluminum Cargo Carrier Review - 2007 Toyota 4Runner

Today, on our 2007 Toyota 4Runner, we'll be test fitting the Curt 20 x 60 Folding Aluminum Cargo Carrier, part number C18100. To begin our test-fit, slide the shank of the carrier into the opening of the hitch tube. Align the pinhole, slide the pin through the pinhole and secure with the clip. Now, lets go over some clearance measurements to see how the cargo carrier and the vehicle fit together. With the cargo carrier folded up, we have about 13 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about 5 1/2 inches.

Surco Hitch Cargo Carrier Review - 2007 Toyota 4Runner

Today, on our 2007 Toyota 4Runner, we'll be test-fitting the Surco 24 x 60 Cargo Carrier, part number 52018. To begin our test fit, we'll slide the shank of the carrier into the opening of the hitch tube, align the pinhole, slide the pin through the pinhole, and secure with the clip. Now, let's go over some clearance measurements to see how the cargo carrier and the vehicle fit together. There's about 14 inches of ground clearance from the rear of the carrier. The closest part of the vehicle to the closest part of the carrier is about six inches. The closest part of the carrier to the closest part of the vehicle's exhaust tip is about 10 inches.

Rola Hitch Cargo Carrier Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4 Runner well be test fitting the Rola 23 x 56 railed cargo carrier, part number 59502. To begin our test fit slide the shank of the carrier into the opening of the hitch tube, align the pin hole, slide the pin through the pin hole and secure it with the clip. Now, lets go over some clearance measurements to see how the cargo carrier and the vehicle fit together. There is about 17 inches of ground clearance from the rear of the carrier. The closest part of the vehicle to the closest part of the carrier is about 12 inches. The closest part of the carrier to the closest part of the vehicles exhaust tip is about 18 inches.

Pro Series Hitch Cargo Carrier Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4 Runner well be test fitting the Pro Series 24 by 60 railed cargo carrier, part number 63153. To begin our test fit we will slide the shank of the carrier into the opening of the receiver tube, align the pin hole, slide the pin through the pin hole and secure it with the clip. Now, lets go over some clearance measurements to see how the cargo carrier and the vehicle fit together. There is about 17 inches of ground clearance from the rear of the carrier. The closest part of the vehicle to the closest part of the carrier is about 14 inches. The closest part of the carrier to the closest part of the vehicles tailpipe is about 19 inches.

Curt Hitch Cargo Carrier Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4 Runner well be test fitting the Curt 20 by 48 cargo carrier, part number C18145. To begin our test fit slide the shank of the carrier into the opening of the hitch tube and align the threaded pin hole. Thread the anti-rattle bolt through the threaded pin hole and tighten with a wrench. Now lets go over some clearance measurements to see how the cargo carrier and the vehicle fit together. There is about 15 inches of ground clearance to the rear of the carrier. The closest part of the vehicle to the closest part of the carrier is about six inches.

Curt 20x60 Folding Aluminum Cargo Carrier Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, we'll be test fitting the Curt 20x60 Folding Aluminum Cargo Carrier for 2-inch hitches, rated at 500 pounds, part number C18100. Now to begin our test fit, we'll slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install our hitch pin. We can then put the clip on the other side which will secure our cargo carrier to the vehicle. At this point, we'll give you a few measurements. Our ground clearance at the cargo carrier is 15 inches and from the closest point of the cargo carrier to the back of the vehicle is 4 inches. We can now pull the pin here at the base of the cargo carrier which will allow us to unfold the cargo carrier platform.

Surco Hitch Cargo Carrier Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, we'll be test fitting the Surco 24x60 Cargo Carrier for 2-inch hitches, part number 52018. Now to begin our test fit, we'll slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install our hitch pin. With the pin in, we can put the clip on the other side which will secure the cargo carrier to the vehicle. We'll now go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is 5-1/2 inches and this cargo carrier will add an additional 31 inches of overall length to the vehicle. Our ground clearance at the back of the carrier is 16-1/4 inches and the exhaust on this vehicle does exit the passenger's side here at the rear bumper.

Rola Hitch Cargo Carrier Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner well be test fitting the Rola 23x56 Railed Cargo Carrier for 2-inch hitches part number 59502. Now to begin our test fit well slide our cargo carrier shank into the hitch, line up the hitch pin hole and install our hitch pin. We can then put the clip on the other side which will secure our cargo carrier to the vehicle. Well now go ahead and give you a few measurements. From the closest point of the cargo carrier platform to the back of the vehicle is 11 inches, and this cargo carrier will add an additional 36 inches of overall length to the vehicle. Our ground clearance here at the back of the cargo carrier is 19-1/2 inches and the exhaust on this vehicle does exit the passengers side here at the rear bumper.

Pro Series Hitch Cargo Carrier Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner well be test fitting the Pro Series 24x60 Railed Cargo Carrier for 2-inch hitches part number 63153. Now to begin our test fit well slide the cargo carrier shank into the hitch, line up the hitch pin hole and install our hitch pin. Well then put the clip on the other side which will secure our cargo carrier to the vehicle. Well now go ahead and give you a few measurements. Our ground clearance at the cargo carrier is 19-1/2 inches, from the closest point of the cargo carrier to the back of the vehicle is 12 inches, and this cargo carrier will add an additional 38 inches of overall length to the vehicle. The exhaust on this vehicle does exit the passengers side here at the rear bumper.

Curt Folding Hitch Cargo Carrier Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner well be test fitting the 24x60 Folding Cargo Carrier for 2-inch hitches rated at 500 lbs from Curt part number C18132. Now to begin our test fit well slide the cargo carrier shank into the hitch, line up the hitch pin hole and install our hitch pin. Well then put the clip on the other side which will secure our cargo carrier to the vehicle. With our cargo carrier in the stored position well go ahead and give you a few measurements. Our ground clearance at the cargo carrier is 16-1/4 inches and from the closest point of the cargo carrier to the back of the vehicle in the stored position is 3 inches. Well now go ahead and pull the pin here at the base of the cargo carrier and bring the cargo carrier platform down.

Curt Hitch Cargo Carrier Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner well be test fitting the Curt 20x48 Cargo Carrier for both 1-1/4 and 2-inch hitches part number C18145. Now to begin our test fit well slide the cargo carrier shank into the hitch, line up the hitch pin hole and install and tighten down our anti-rattle bolt. With our bolt tight, our cargo carrier is secured to the vehicle. Well now go ahead and give you a few measurements. From the closest point of our cargo carrier to the back of the vehicle is 5-1/2 inches. Our cargo carrier will add an additional 25 inches of overall length to the vehicle.

Thule Pulse XL Rooftop Cargo Box Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, well be test fitting the Thule Pulse XL Rooftop Cargo Box, part number TH615. Now this 16-cubic-foot, matte black finish cargo box features a low-profile design while holding your luggage on top of the vehicle. Now to begin our test fit, well place the box on top of our crossbars. Now weve already gone ahead and passed the clamps through the cargo box, so as we load it youll notice that our clamps are open and well make sure that they go over the top of both the front and rear crossbar. We can then make sure that our box is centered with the vehicle, where well tighten down the gray knobs inside the cargo box, clamping the clamps to the crossbars, securing our box to the vehicle. With all four clamps tight, our cargo box is secured and were ready to load it up.

Thule Pulse Large Rooftop Cargo Box Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, well be test fitting the Thule Pulse Large Rooftop Cargo Box, part number TH614. Now this 14-cubic-foot, matte black finish cargo box features an aerodynamic low-profile design while still being able to carry your luggage on top of the vehicle. Now all well need to do is go ahead and place our cargo box on top of our crossbars, where youll notice that our clamps have already been opened up. Well allow them to slide in and over the AeroBlades that we have on our 4Runner here. Well now go ahead and center the carrier with the vehicle where we can then open the lid and tighten down the four gray knobs, securing our cargo box to the vehicle. Now in place correctly, this box will not interfere with the cargo door.

Thule Force XL Rooftop Cargo Box Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, well be test fitting the Thule Force XL Rooftop Cargo Box, part number TH625. Now this 17-cubic-foot, AeroSkin, black in color cargo box features a low profile design and large enough to carry your luggage. This is a very quick installation. All well need to do is place the box on top of the crossbars. It may be a good idea to go ahead and loosen up the clamps and make sure theyre fully open before loading it onto your vehicles crossbars. Well go ahead and use an extra set of hands to help us get it on top of the 4Runner, where well make sure the clamps slide over our Thule AeroBlades.

Thule Force Large Rooftop Cargo Box Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, well be test fitting the Thule Force Large Rooftop Cargo Box, part number TH624. Now to begin the test fit, well place the box on top of the crossbars. Well align the clamping hardware over the top of the crossbars and tighten down the gray knob, securing the box to the vehicle. While also securing the box to the vehicle, it also secures the clamp to the box, making this a very quick and easy installation. That completes our test fit of the Thule Force Large Rooftop Cargo Box, part number TH624, on our 2012 Toyota 4Runner.

Yakima LoadWarrior Roof Cargo Basket Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4Runner, were going to be test fitting the Yakima LoadWarrior, part number Y07070. Now our vehicle is already equipped with the factory crossbars and our basket is already pre-assembled, so were ready to go ahead and fit it to the vehicle. Well begin by placing the basket on top of the crossbars. Well center it from left to right with the vehicle. Well then clamp it down using the included hardware with the basket. And with our hardware tight, our cargo basket is secured to the vehicle, and were ready to go ahead and load it up.

Thule MOAB Roof Top Cargo Basket Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4Runner we'll be test fitting the Thule M.O.A.B. Roof Top Cargo Carrier, part number TH690. With our cargo basket preassembled were ready to go ahead and fit it to the vehicle. We'll simply set the cargo basket on top of the crossbars and tighten it down using the included hardware. And with all our hardware tight, we can go ahead and install our hardware covers. And with that, our cargo basket is secured then were ready to load it up.

Rola Roof Cargo Basket Installation - 2007 Toyota 4Runner

Today on our 2007 Toyota 4 runner we'll be test fitting the Rola roof mounted cargo basket part number 59504. With our 4 runner equipped with the factory cross rails and a roof basket pre-assembled, we're ready to go ahead and fit it to the vehicle. Now our cross bar spread is said at 30" So go ahead and set the cargo basket on top of the crossbars well center it left to right with the vehicle and then we'll simply clamp it down using the provided hardware. And with each of the four clamps tight our cargo basket is secured to the vehicle and were ready to go ahead and load it up. And that completes our test fit of the Rola roof mounted cargo basket part number 59504 on our 2007 Toyota 4 runner.