Select Your Vehicle


Top 20 Most Popular Toyota 4Runner Bike Rackschange vehicle



#1Thule Hitching Post Pro - Folding Tilting 4 Bike Rack w Anti-Sway - 1-1/4" and 2" Hitches

Thule

Rating:
101 reviews


TH934XTR

Retail:$219.00

Price:$199.24


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Fold-Up Rack
Thule

more information      



Questions from Toyota 4Runner owners about this product


  • Is There a Smaller Version of the Thule Hitching Post Pro Bike Rack TH934XTR
  • The Thule Vertex 2 Bike Carrier, # TH9028XT, offers some of the same great features as the #TH934XTR including the anti sway cradles, folding arms, and tilting mast. The Thule Parkway, # TH958, is another good option. A bit more economical than the Vertex but still offers the tilting feature. The Thule Hitching Post Pro, # TH934XTR, is loaded with features and such a great value that it would be my personal choice even if I was only planning to carrying 2 bikes. It is recommended...
    view full answer...

  • Will the TH914XT Fit on a 2007 Toyota 4 Runner
  • Yes, as long as your 2007 Toyota 4 Runner has a receiver hitch installed at the rear of the vehicle the Thule Hitching Post Pro 4 Bike Carrier for 1-1/4 inch and 2 inch Hitches - Tilting - Hitch Mount, item # TH934XTR will work on your vehicle. There is 11-7/8 inches of clearance from the center of the hitch pin hole to the upright bar on the carrier so that should be plenty to clear the rear bumper of your vehicle. If you have added a rear mounted spare tire on your vehicle you will...
    view full answer...




#2Pro Series Eclipse 4 Bike Rack for 2" Hitches - Tilting

Pro Series

Rating:
191 reviews


63124

Retail:$157.49

Price:$125.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Locks Not Included

Product Specs:

Fits 2 Inch Hitch
Class 3
Frame Mount - Standard
Tilt-Away Rack
Pro Series

more information      



Questions from Toyota 4Runner owners about this product


  • Will Pro Series Eclipse 4 Bike Carrier # 63124 Fit on Toyota 4Runner
  • As long as your Toyota 4Runners factory trailer hitch has a 2-inch receiver, you will have no problems using the Pro Series Eclipse 4 Bike Carrier # 63124. It tilts away from the vehicle so you can more easily access your rear cargo bay and features an anti-rattle device to cut down on noise while traveling. It also has a weight capacity of 120 lbs. I have provided links to the installation instructions and a video showing the installation of this rack on a 2012 Toyota 4Runner. While...
    view full answer...

  • Bike Rack Recommendation for a 2013 Toyota 4Runner to Clear Rear Spare
  • To determine if the Pro Series Eclipse 4 Bike Rack # 63124 would clear the rear spare of your 2013 Toyota 4Runner you need to take one simple measurement. You need to measure from the center of the hitch pin hole out to the furthest point out on the spare tire. If that measurement is less than 8 inches the # 63124 would work for you as this rack has a distance of 8 inches from the center of its pin hole to the upright bar of the rack. For a similar bike rack with more clearance you would...
    view full answer...

  • Will the Tow Ready 4 Bike Hitch Mounted Folding Rack Fit on a 1999 Toyota 4Runner
  • The Tow Ready 4 Bike Hitch Mounted Folding Rack, item # 63124, should fit just fine on your 1999 Toyota 4Runner. The best way to be sure is to measure from the center of your hitch pin hole to the farthest back part of your vehicle. If the measurement you get is shorter than 8 inches then you are good to go. This rack is one of our best selling racks and gets great reviews from our customers.
    view full answer...




#3Swagman XTC-2 2-Bike Platform Rack for 1-1/4" and 2" Trailer Hitches

Swagman

Rating:
377 reviews


S64670

Retail:$234.00

Price:$210.60


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Wheel and Frame Mount
Fixed Rack
Swagman

more information      





#4Thule Doubletrack Platform-Style 2 Bike Rack for 1-1/4" and 2" Hitches - Hitch Mount

Thule

Rating:
276 reviews


TH990XT

Price:$299.95


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
Steel
Bike and Hitch Lock

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Wheel and Frame Mount
Fold-Up Rack
Thule

more information      



Questions from Toyota 4Runner owners about this product


  • Platform Bike Rack Solutions for a 2003 Toyota 4Runner to Clear Spare
  • An ideal solution for you would be to use a hitch mounted bike rack on your 2003 Toyota 4Runner that has a longer shank, so that your Yakima Holdup Bike Rack part # Y02443 will clear the spare. Another solution you have would be to use a hitch extender like part # HE06. This will provide you with 7 additional inches of clearance so that your bike rack would clear. The Thule T2 part # TH916XTR has 4 more inches of clearance from the pin hole to the first bike rail so it would fit. The...
    view full answer...

  • Swagman XTC2 Bike Rack Compared to Thule Doubletrack
  • Both the Thule Doubletrack Platform-Style 2 Bike Rack # TH990XT and the Swagman XTC-2 2-Bike Platform Rack # S64670 are great racks that would do an excellent job on your 2007 Toyota 4Runner. The biggest advantage the Doubletrack has is that it can fold up on your hitch when not in use, also this rack includes locks whereas the Swagman requires you to purchase them separately, part # S64029. I attached review videos for both racks for you to check out as well.
    view full answer...




#5Thule Apex 4 Bike Rack for 1-1/4" and 2" Hitches - Tilting

Thule

Rating:
46 reviews


TH9025

Price:$399.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Bike and Hitch Lock

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Fold-Up Rack
Thule

more information      





#6Thule T2 2-Bike Rack - Platform Style - Tilting - 2" Hitches

Thule

Rating:
75 reviews


TH916XTR

Price:$449.95


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
Steel
Bike and Hitch Lock

Product Specs:

Fits 2 Inch Hitch
Class 3
Wheel Only Mount
Tilt-Away Rack
Fold-Up Rack
Thule

more information      





#7Thule Passage 2 Bike Carrier - Trunk Mount

Thule

Rating:
101 reviews


TH910XT

Price:$139.95


Product Summary:

view all Trunk Bike Racks
Frame Mount - Anti-Sway
2 Bikes
Locks Not Included

Product Specs:

Dual Arm
Folding
Hanging Rack
Thule

more information      





#8Swagman XP Towing Rack - Folding 3 Bike Rack for 2" Trailer Hitches

Swagman

Rating:
29 reviews


S64955

Retail:$220.00

Price:$179.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
3 Bikes
Steel
Bike Lock

Product Specs:

Fits 2 Inch Hitch
Class 3
Frame Mount - Standard
Towing Rack
Swagman

more information      



Questions from Toyota 4Runner owners about this product





#9Thule T2 Platform-Style 4 Bike Rack for 2" Hitches - Tilting

Thule

Rating:
9 reviews


TH916XTR-918XTR

Price:$779.90


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
4 Bikes
Steel
Bike and Hitch Lock

Product Specs:

Fits 2 Inch Hitch
Class 3
Wheel Only Mount
Tilt-Away Rack
Fold-Up Rack
Thule

more information      





#10Yakima DoubleDown 4 Bike Hitch Mounted Folding Rack for 1-1/4" & 2"

Yakima

Rating:
45 reviews


Y02424

Retail:$219.00

Price:$197.10


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 2 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Fold-Up Rack
Yakima

more information      





#11Kuat NV 4 Bike Platform Rack for 2" Trailer Hitches - Aluminum

Kuat

Rating:
1 reviews


N101-103

Retail:$938.00

Price:$904.00


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
4 Bikes
Aluminum
Bike and Hitch Lock

Product Specs:

Fits 2 Inch Hitch
Class 3
Wheel Only Mount
Tilt-Away Rack
Fold-Up Rack
Kuat

more information      





#12Swagman Fork Down Roof Mounted Bike Carrier - Fork Mount

Swagman

Rating:
13 reviews


S64710

Retail:$52.00

Price:$46.80


Product Summary:

view all Roof Bike Racks
Fork Mount
9mm Fork
Steel
Locks Not Included

Product Specs:

Round Bars
Square Bars
Aero Bars
Elliptical Bars
Factory Bars
No Disc Brakes
Clamp On - Standard
Black
Swagman

more information      



Questions from Toyota 4Runner owners about this product


  • Will the Swagman Fork Style Roof Mounted Bike Rack Fit Toyota 4Runner Factory Cross Bars
  • The Fork Style Roof Mounted Bike Rack - Swagman Fork Down, # S64710, is designed to fit best with Thule (square bars) and most OEM factory cross bars (that run side to side). I spoke with my contact at Swagman and he stated that the width of the u-bolts used to secure the rack to the cross bars is 3-3/8 inches. As long as your cross bars are under that, the rack will fit your Toyota 4Runner. I have included a link to the installation details below.
    view full answer...

  • Will Swagman Fork Down Roof Mounted Bike Carrier # S64710 Fit Factory Roof Bars on 2002 4Runner
  • The clever folks at Swagman designed their Fork Down Roof Mounted Bike Carrier # S64710 with mounting hardware that can easily fit many different shapes and sizes of factory roof rack crossbars. This will fit your factory rack as long as the crossbars are not wider than 3-inches. We do offer many roof-mount bike racks that will fit most factory bars, and the link provided for you will let you see them. You can use the filters on the page to narrow and sort the results based on your preferences...
    view full answer...




#13Swagman XTC4 4-Bike Rack for 2" Hitches - Platform Style

Swagman

Rating:
85 reviews


S64665

Retail:$400.00

Price:$351.00


Product Summary:

view all Hitch Bike Racks
Platform Rack
4 Bikes
Steel
Bike and Hitch Lock

Product Specs:

Fits 2 Inch Hitch
Class 3
Wheel and Frame Mount
Fold-Up Rack
Swagman

more information      



Questions from Toyota 4Runner owners about this product


  • Will the Swagman XTC4 Bike Rack Fit on a 2011 Subaru Outback When Folded
  • I went to the showroom and got the XTC4, # S64665, bike rack that we have on display. I took it to our photo studio and produced a short video showing the hitch pin hole to closest part of the bike rack measurement for you, see link. Manufacturing tolerances will play a role in the measurement so the hitch pin hole on the rack you receive may be slightly different that the one I used in the video.
    view full answer...

  • Will Swagman XTC4 4-Bike Carrier # S64665 Allow Rear Hatch Access on a 2013 Toyota 4 Runner
  • The Swagman XTC4 4-Bike Carrier for 2-inch hitches, part # S64665, does have tilting upright masts to allow hatch access when not loaded with bikes but the main horizontal structure can drop only to a level position (as with bikes loaded and going down the road). It does not tilt down below the level position. With your four bikes loaded you will not be able to open your rear hatch. A better option for rear hatch access is the Yakima HoldUp 2-bike carrier # Y02443 partnered with the...
    view full answer...




#14Rola TX-102 2-Bike Rack for 1-1/4" and 2" Hitches - Tilting

Rola

Rating:
31 reviews


59400

Retail:$184.00

Price:$139.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
2 Bikes
Steel
Bike Lock

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Fold-Up Rack
Rola

more information      





#15Rola TX-103 3-Bike Rack for 1-1/4" and 2" Hitches - Tilting

Rola

Rating:
30 reviews


59403

Retail:$198.73

Price:$149.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
3 Bikes
Steel
Bike Lock

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 2 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Fold-Up Rack
Rola

more information      





#16Softride Dura Parallelogram 4 Bike Rack for 1-1/4" and 2" Hitches - Tilting

Softride

Rating:
55 reviews


SR26247

Retail:$309.99

Price:$300.00


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Bike and Hitch Lock

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 2 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Swing-Away Rack
Softride

more information      





#17Swagman Trailhead 3 Bike Rack for 1-1/4" and 2" Hitches - Tilting

Swagman

Rating:
15 reviews


S63365

Retail:$170.00

Price:$153.00


Product Summary:

view all Hitch Bike Racks
Hanging Rack
3 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Frame Mount - Standard
Tilt-Away Rack
Fold-Up Rack
Swagman

more information      





#18Pro Series Translite 4 Bike Rack for 1-1/4" and 2" Hitches - Tilting

Pro Series

Rating:
11 reviews


PS63144

Retail:$115.49

Price:$104.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Frame Mount - Standard
Tilt-Away Rack
Pro Series

more information      





#19Advantage SportsRack V-Rack 2 Bike Rack for 2" Ball Mounts - Towing

Heininger Holdings

Rating:
11 reviews


HE1011

Retail:$84.95

Price:$79.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
2 Bikes
Steel
Locks Not Included

Product Specs:

Fits 2 Inch Hitch
Class 3
Frame Mount - Standard
Towing Rack
Fold-Up Rack
Heininger Holdings

more information      





#20Hollywood Racks Sport Rider SE 4-Bike Platform Rack - 2" Hitches - Frame Mount

Hollywood Racks

Rating:
27 reviews


HR1400

Retail:$443.99

Price:$399.59


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
4 Bikes
Steel
Bike and Hitch Lock

Product Specs:

Fits 2 Inch Hitch
Class 3
Wheel and Frame Mount
Tilt-Away Rack
Fold-Up Rack
Hollywood Racks

more information      









Toyota 4Runner Hitch Bike Racks Videos

Saris Freedom Hitch Bike Racks Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, we are going to be test fitting the Saris Freedom Two Bike platform style rack for 1 1/4 and 2 inch hitches part number SA4412B. To begin our test fit we are going to insert the shank of the rack into our hitch. This does slide it helps to keep a hand on the adapter. Once you have that inserted, you go ahead and line up your hitch pin holes, you can then insert the included anti rattle hitch bolt. We'll go ahead and tighten this down by hand then finishing tightening it with our wrench. By tightening this down it helps to take any extra movement out of the shank of our rack.



Saris Bike Porter Hitch Bike Racks Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, we are going to be test fitting the Saris Bike Porter Four Bike hanging style rack for 1 1/4 and 2 inch hitches part number SA404B. We'll begin our test fit by inserting the shank into the receiver hitch on our vehicle. You want to watch for the pin holes to line up. Once those are in line, you can insert the included anti rattle hitch bolt. We'll go ahead and get that hand tight and then you can tighten it down the rest of the way with your wrench. Tightening this down helps to take any extra play out of the shank of the rack.



Saris Freedom SuperClamp Hitch Bike Racks Review - 2012 Toyota 4Runner

Today, on our 2012 Toyota 4Runner, we're going to test fit the Saris Freedom Super Clam 2-bike, platform style rack for 1 1/4 and 2-inch hitch, part number SA4025. We'll begin our test fit by inserting the shank of the rack into the hitch of our vehicle. Once you have it inserted, you want to watch for the pinholes to line up. With your pinholes in line, you go ahead and take the included anti-rattle hitch lock and thread it through the hole. It is a longer bolt so it's got plenty of thread links. We'll then secure it with a wrench.



Saris Freedom Hitch Bike Racks Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, we're going to be test fitting the Saris Freedom 4 bike platform-style rack for two-inch hitches, part number SA4414B. We'll begin our test fit by inserting the shank of our rack into our vehicle. With that inserted, you'll want to watch for the pinholes to line up. You may have to wiggle it around a little to get it in line. You'll then thread in your anti-rattle hitch bolt. You'll go ahead and get it hand tight, and tighten it down the rest of the way with your wrench.



Saris Axis Hitch Bike Racks Review - 2012 Toyota 4Runner

Today on our 2013 Toyota 4Runner, we're going to be test fitting the Saris Access 3-bike rack for inch and a quarter and two inch hitches. Part number SA843B. To begin our test fit we're going to start by inserting the shank of our rack into the hitch of our vehicle. You'll want to watch for the pin holes to line up and then you'll insert the included anti-rattle hitch bolt. Once that's hand tight you can go ahead and take your ratchet and finish the job. With that on tight you can go ahead and push your lock on to the other side. Now that we've got our bike rack on we'll go ahead and get a few measurements. The closest point of the rack to the furthest point of the vehicle is going to be right about eight and a half inches.



Saris Axis Hitch Bike Racks Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, were going to test-fit the Saris Axis 2-Bike Rack for 1 1/4 and two-inch hitches, part number SA832B. To begin our test-fit, we'll insert the shank of the rack into the hitch of our vehicle. This does come with the two-inch adapter sleeve. You will want to keep a hand on it as you line up the pinholes. Once you've lined the pinhole up, you go ahead and take the included threaded anti-rattle hitch bolt, and thread that into place. Once you've got that hand tight, you can take your wrench and secure it the rest of the way. This helps to remove any wiggle that we have in the shank of our rack.



Kuat NV Hitch Bike Racks Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4 Runner, we are going to be test fitting the Kuat NV platform style 2 bike rack for 2 inch hitches, part number N101. To begin our test fit we are going to insert the shank of our rack into our receiver hitch on our vehicle. With that inserted we want to watch for the pin holes to line up. Once we have our pin holes in line, we'll go ahead and insert our locking hitch pin and snap the lock onto the other side. We'll then tighten down the anti rattle device located here at the end of the shank. This helps to take any kind of play out of the shank of the rack.



Kuat Hitch Bike Racks Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner we're going to be test fitting the Kuat Beta 2-bike carrier. Today on our 2012 Toyota 4Runner we're going to be test fitting the Kuat Beta 2-bike rack, part number B202-2. To begin our test fit we'll go ahead and insert the shank of our rack into the hitch on our vehicle. With that done, we'll want to watch for the pin holes to line up. You'll then take the included hitch pin lock and insert it through the hitch pin hole, snapping the lock onto the other side. With our lock in place we can go ahead and tighten down our anti-rattle device. It's good to give it a little wiggle to make sure you have it all the way in place. With the rack in this position our clearance from the furthest part of the vehicle is about 7 inches.



Hollywood Racks Sport Rider 2 Hitch Bike Racks Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, we're going to be test fitting the Hollywood Racks Sport Rider 2, 2-Bike Carrier. Today on our 2012 Toyota 4Runner, we're going to be test fitting the Hollywood Racks Sport Rider 2, 2-Bike Platform Rack for 1 1/4 and 2 inch hitches, part number HR1000. To begin our test fit, we're going to start by inserting the shank of the rack into the hitch on our vehicle. Once you have that inserted, you'll want to watch for the pin holes to line up. With your pin holes in line, you'll go ahead and take the included anti-rattle hitch bolt and thread it into place. These have quite a bit of thread length on them so it does take a second. Once you have it hand tight, you can go ahead and tighten it the rest of the way with your wrench.



Saris Thelma Hitch Bike Racks Review - 2012 Toyota 4Runner

Today on our 2012 Toyota Forerunner we're going to be test fitting the Saris Thelma 3 bike platform style rack for 1 1/4"and 2" hitches, part number SA4239B. We'll begin our test fit by inserting the shank of the rack into our hitch. Once that's inserted you'll want to watch for the hitch pin hole to line up. You'll then take the included threaded anti-rattle hitch pin and thread that into place. Once you've gotten this hand-tight you can go ahead and finish the job with your wrench. What this does is it helps to take any play out of the shank to reduce any movement there. We'll then secure our clip on the other side of the pin. With our rack in this position we'll get a few measurements.



Hollywood Racks Sport Rider SE2 Hitch Bike Racks Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4-Runner, we're going to be test fitting the Hollywood Rack Sport Rider Se2 two bike platform style carrier, part number Hr1450. To begin our test fit, we'll go ahead and get the shank of the rack started into our receiver hitch. I will point out, before we insert it all the way, there is an anti-rattle device that comes on this. As you can see here, it can rotate out of position, so you want to make sure that this is the loop space and the right way your pin can reach through it. Well go ahead and slide the rack in the rest of the way. Take the locking hitch pin that's included and slide it through, making sure to line up our bar inside. Pop the lock on and we'll take and tighten this down, which will help serve as an anti-rattle device.



Thule Apex 4 Hitch Bike Rack Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4runner well be test fitting the Thule Apex 4-Bike Carrier, part number th9025. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch, and allowing the integrated hitch pin to fall into place. Well then turn the black knob to engage the anti-rattle device. Now with our Thule Apex secured to our 4runner well go over a few clearance measurements to see how the two fit together. We have about 17 inches of ground clearance at the rear. With the cradle arms folded down weve added about 15 inches to the overall length of our vehicle.



Yakima HighLite 2 Hitch Bike Rack Review - 2007 Toyota 4Runner

Today, on our 2007 Toyota 4Runner, well be test-fitting the Yakama-Highlite Aluminum two-bike carrier, part number Y02438. Well begin our test-fit by sliding the shank of the bike rack into the opening of the hitch. Align the pin holes up and insert the pin with the red knobs against the pinhole and well then turn the black knob at the back of the shank to engage the anti-rub device. Now that our Highlite is secured to our 4Runner, well go over some clearance measurements. We have about 19 inches of ground clearance. The closest part of the bike rack and the closest part of the closest of the vehicle is about 8 inches away.



Yakima DoubleDown Ace Hitch Bike Rack Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4runner well be test fitting the Yakima Doubledown Ace 4-Bike Carrier, part number y02451. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well insert the pin with the red knob into the pin holes and turn the black knob to engage the anti-rattle device securing the bike rack to the vehicle. With this done well now go ahead and go over a few clearance measurements. We have about 19 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 9 inches away.



Yakima DoubleDown Ace 2 Bike Rack Review - 2007 Toyota 4 Runner

Today on our 2007 Toyota 4runner well be test fitting the Yakima Doubledown Ace 2-Bike Carrier, part number y02450. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well insert the pin with the red knob into the pin holes and secure the bike rack to the vehicle by turning the black knob at the back of the shank. Now with the bike rack secured to our vehicle, well go over a few clearance measurements. We have about 19 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 9 inches away.



Thule Vertex 4 Hitch Bike Rack Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4runner well be test fitting the Thule Vertex 4-Bike Carrier, part number th9029. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well install and tighten down our anti-rattle bolt and our Thule Vertex is secured to our 4runner. Well now go over a few clearance measurements to see how the two fit together. We have about 16 1/2 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 6 inches away.



Thule Helium Aero Hitch Bike Rack Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4runner well be test fitting the Thule Helium Aero hitch mounted 2-Bike Carrier, part number th9042. Well begin our test fit, by sliding the shank of the bike rack into the opening of the hitch and allowing the integrated hitch pin to fall into place. We can then turn the black knob to engage the anti-rattle device. With the bike rack secured to our 4runner well go over a few clearance measurements. We have about 21 inches of ground clearance at the rear. With the cradle arms folded down we have about 21 1/2 inches added to the overall length of the vehicle.



Thule Apex 4 Swing Hitch Bike Rack Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4runner well be test fitting the Thule Apex Swing 4-Bike Carrier, part number th9027. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch and allowing the integrated hitch pin to fall into place. We can then turn the black knob at the base of the carrier to engage the anti-rattle device. Now with the Apex Swing secured to our 4runner well go over some measurements. We have about 16 inches of ground clearance at the rear. With the cradle arms folded down weve added about 15 inches to the overall length of our 4runner.



Kuat Beta Hitch Bike Rack Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4runner well be test fitting the Kuat Beta hitch mounted aluminum 2-bike carrier, part number b202-2. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well line up the pin holes, and insert the key and secure it with the lock on the other side. We can then turn the black knob to engage the anti-rattle device. Well now go ahead and go over a few clearance measurements. We have about 13 inches of ground clearance at the rear.



Thule Apex 4 Swing Hitch Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, well be test fitting the Thule Apex Swing 4 Bike Carrier, part number TH9027. To begin our test fit, well slide the shank of the carrier into the opening of the hitch, well line up the pinholes and insert and the spring loader pin into the pinhole. Well then turn the black knob located at the base of the carrier to engage our anti-rattle device. Now well go ahead and go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 17 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about 3 inches.





Toyota 4Runner Roof Bike Racks Videos

Thule Circuit Roof Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner we'll be test fitting the Thule Roof Mounted Bike Carrier, part number th526. We'll begin our test fit by placing the carrier onto the vehicle's load bars. At the rear of the carrier we can loosen up the wing nuts to bring the rear bracket around the underside of the rear load bar and thread our wing nuts back onto the bolts making sure not to tighten them too tight so we can position the front of the carrier onto the front load bar.Now at the front of the carrier we can open up the cam action lever to bring the bracket around the underside of the front load bar. After adjusting the bracket to fit the thickness of the load bar we can then slide the T-bolt into the cutouts of the bracket. We can then turn the T-bolt finger tight and clamp down the cam action lever securing the front of the carrier to the front load bar.We'll then insert our skewer making sure it is loose for when we load up our bike. We'll then move to the rear bracket where now we will tighten down the wing nuts to secure the rear part of the carrier to the rear load bar.



RockyMounts TieRod Stretch Roof Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4runner well be test fitting the Rocky Mount tie rod stretch roof mounted bike carrier, part #RKY1011. Well begin our test fit by placing the carrier onto the vehicles load bars. Well go ahead and start with the rear bracket. Well loosen up one of the allen bolts to bring the rear bracket around the underside of the rear load bar. Well insert the allen bolt through the hole in the bottom of the bracket and tighten it down with the allen wrench. Well now move to the head of the carrier where well remove the black plastic cover. Well slide the carrier back to bring the rubber coated steel straps around the underside of the front load bar. Well then use the included allen key to tighten down the silver bolt to bring the straps up around tightly against the front load bar.



Yakima FrontLoader Roof Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4runner well be test fitting the Yakima front loader roof mounted bike carrier, part #Y02103. To begin our test fit well place the carrier onto the vehicles cross bars. Well slide the head of the carrier onto the front cross bar and bring the back bracket around the rear cross bar. Up at the head of the carrier turn the black T-handle to pinch the clamps together, securing the head of the carrier to the front cross bar. Well then move to the rear of the carrier where we will tighten the black wing nut to secure the rear part of the carrier to the rear cross bar. Now with the front loader secured to our 4runner were ready to load up our bike. Well fold out the front part of the wheel hook and undo the tray strap. Well place the bike onto the carrier and roll it forward bringing the back part of the wheel hook up behind the front tire.



Yakima ForkLift Roof Mounted Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4runner well be test fitting the Yakima Forklift Roof Mounted Bike Carrier, part number y02098. Well begin our test fit by placing the carrier onto the vehicles crossbars. Well bring the back bracket around the rear crossbar and insert the t-bolt into the opening of the bracket. Well then loosen up the black wing nut at the head of the carrier to bring the bracket around the front crossbar. Well reinsert our silver tbolt and tighten down the black wing nut to secure the head of the carrier to the front crossbar. Well then remove our skewer to slide up the black security cover, and then replace our skewer making sure it is kind of loose to prepare us to load our bike.



Whispbar Roof Mount Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4runner well be test fitting the Whispbar Rooftop Bike Carrier, part number wb-200. Well begin our test fit by placing the carrier onto the vehicles crossbars. With the latches undone, well slide the t-bolts into the rubber tracking of our roof rack. Well then adjust the rear as well to fit the rear crossbar. Now our vehicle is equipped with a Whispbar Roof Rack so we wont be needing the round bar adapter. Once the t-bolts are in the rubber channel, we can then clamp down the silver levers which will turn the t-bolts inside of the rubber channel and secure the bike rack to the vehicle.



Thule Domestique Roof Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, we'll be test fitting the Thule Domestique Roof Mounted Bike Carrier, part number TH513. We'll begin our test fit by placing the carrier onto the vehicle's load bars. Using the Allen key, we'll loosen up the Allen bolts for the rear bracket to bring the rear bracket on the underside of the rear load bar. We'll then need to remove the skewer up at the front to expose the two front Allen bolts. We'll then loosen up the Allen bolts to bring the front bracket around the underside of the front load bar. Once both brackets are in position, we can then again use the Allen key to tighten on the Allen bolts to bring the brackets up around tightly against the load bars.



Swagman Fork Down Roof Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, we'll be test fitting the Swagman Fork Down Roof Mounted Bike Carrier, part number S64710. We'll begin our test fit by placing the carrier onto the vehicle's load bars. We'll take the silver bracket and slide it down through the carrier on top of the rear load bar. Now moving up to the front, we'll take the two silver brackets and go underneath the front load bar and into the carrier. We'll then thread on the black wing nuts down on top of the bracket to secure the front of the carrier to the front load bar. We'll then move to the rear of the carrier where we will slide the black plate onto the bracket and use the included wing nuts to tighten it down.



RockyMounts TieRod Roof Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, we'll be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier in black, part number RKY1012. We'll begin our test fit by placing the carrier onto the vehicle's load bars. We'll loosen up the wing nuts for the rear bracket to bring the rear bracket on the other side of the rear load bar. We'll tighten the wing nuts loosely and move to the front of the carrier where we'll remove the black plastic cover. We'll slide the carrier back to bring the rubber coated steel straps around the other side of the front load bar. We'll hook the straps back into the top of the bracket and use the included Allen key to turn the silver bolt to bring the straps around tightly against the front load bar.



RockyMounts PitchFork Roof Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, we'll be test fitting the RockyMounts PitchFork Roof Mounted Bike Carrier, part number RKY0438. We'll begin our test fit by placing the carrier onto the vehicle's load bars. We'll pop off the black plastic cover at the head of the carrier and remove our skewer, exposing the two Allen bolts. We'll loosen up the Allen bolts to bring the gold bracket around the underside of the front load bar. We'll then use the Allen key to tighten down the Allen bolts. We'll then move to the back of the carrier.





Toyota 4Runner Trunk Bike Racks Videos

Thule Gateway Trunk Mount Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, well be test fitting the Thule Gateway Trunk Mounted 2 Bike Carrier, part number th9006xt. Now before we begin our test fit, we will first need to refer to the Thules fit guide or included instructions to determine what number our fit dial should be at. After setting our fit dial, well set the carrier onto the vehicle. Well put the top straps to the top part of the trunk above the spoiler, the side straps to the side part of the trunk, you may need to open up the vehicles cargo door to get the bottom hooks into position, and the bottom straps to the bottom part of the trunk. Well now tighten down the straps to secure the carrier to the vehicle. Now with the carrier secured to the vehicle, were ready to load our bike.



Thule Raceway Platform Trunk Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, well be test fitting the Thule Raceway Platform Style Trunk Mounted 2 Bike Carrier, part number th9003. To begin our test fit, we will first need to refer to the Thule Fit Guide or the included instructions to set our fit dial. Once weve set our fit dial, well place the carrier onto the vehicle. Well put the top straps to the top part of the cargo door above the spoiler, and the bottom straps to the bottom part of the cargo door. You may need to open up your cargo door to get the bottom straps into position. Well then turn the knobs on the left and right hand side of the carrier to tighten down the straps and secure it to the vehicle.



Thule Raceway Trunk Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, well be test fitting the Thule Raceway Trunk Mounted 2 Bike Carrier, part number th9001. Now to begin our test fit, we will first need to refer to the Thule fit guide or the included instructions to determine what number our fit dial should be at. After setting our fit dial, well place the carrier onto the vehicle. Well put the top hooks to the top part of the trunk above the spoiler, and the bottom hooks to the bottom part of the trunk. You may need to open up the cargo door to get the bottom hooks in place. Well then turn the knobs on the left and right hand side of the carrier to tighten down the straps to secure the carrier to the vehicle.



Thule Passage Trunk Mounted Bike Rack Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner, well be test fitting the Thule Passage Trunk Mounted 2 Bike Carrier, part number th910xt. Now before we begin our test fit, we will first need to refer to the Thule Fit Guide, or the included instructions to determine what number our fit dial should be at. After setting our fit dial, well set the carrier onto the vehicle. Well put the top hooks to the top part of the cargo door above the spoiler, the bottom hooks to the bottom part of the trunk, and the side hooks to the side part of the trunk. You may need to open up the cargo door to position the bottom hooks in place. Once all the hooks are in place, well then tighten down the straps to secure the carrier to the vehicle.





Toyota 4Runner Hitch Bike Racks Questions



Toyota 4Runner Roof Bike Racks Questions



Toyota 4Runner Trunk Bike Racks Questions



Toyota 4Runner Truck Bed Bike Racks Questions









Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com