Top 20 Most Popular Toyota 4Runner Ball Mountschange vehicle

Draw-Tite Ball Mount Review - 2012 Toyota 4Runner

Today on our 2012 Toyota 4Runner well be test fitting the Draw Tite ball mount three-quarter inch rise or two inch drop rated at 6,000 pounds, part number 2923. Before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Our measurement is 19 inches. This measurement may vary due to tire size, hitch style, or aftermarket accessories. To begin our test fit in the drop position well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes and secure with the clip on the other side.

Hidden Hitch Ball Mount with 4 Inch Drop Review - 2012 Toyota 4Runner

Today on our 2012 Toyota Four Runner well be test fitting the Hidden Hitch Ball Mount with four and three quarter inch rise or six inch drop weighed in at 6,000 pounds, part number 80240. Now before well begin our test fit well first need to obtain the hitch height from our vehicle, this is the measurement from the ground to the inside top of the receiver tube, our measurement is 19 inches, this measurement may vary due to tire size, hitch style, or after marketing accessories. Now well go ahead in the drop position slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure it with a clip on the other side. Well go ahead and measure from the ground to the top of the ball platform and we get a measurement of 13 inches, well then flip the ball mount over into the rise position and measure from the ground to the top of the ball platform and well get a measurement of 24 inches. That completes todays test fit for the Hidden Hitch Ball Mount with four and three quarter inch rise or six inch drop weighed in at 6,000 pounds, part number 80240 on our 2012 Toyota Four Runner.

Curt Tri-Ball Mount Review - 2007 Toyota 4Runner

Today, on our 2007 Toyota 4Runner, we'll be test fitting the Curt Tri-Ball Mount, part number C45001. Before we begin out test fit, we will need to obtain a hitch height for our vehicle. This is the measurement from the ground to the inside top of the hitch tube. Ours is about 17 inches. Slide the shank into the opening of the receiver hitch tube. Align the pinhole.

Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4 Runner well be test fitting the Convert-A-Ball cushioned ball mount, part number AMSC4. Before we begin our test fit we will need to get a hitch height for this vehicle. This is the measurement from the ground to the inside top of the hitch tube. Our measurement is about 17 inches. Well now go ahead and slide the shank of the ball mount into the receiver tube of the hitch in its drop position, line up the hitch pin hole, slide the pin through the pin hole and secure it with the clip. The measurement from the ground to the top of the ball platform in the drop position is about 13 inches.

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2007 Toyota 4Runner

Today on our 2007 Toyota 4 Runner well be test fitting the Convert-A-Ball cushioned ball mount, part number AMSC2. Before we begin our test fit we will need to get a hitch height for this vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 17 inches. We will now slide shank into the opening of the receiver tube in the drop position, align the pin hole, slide the pin through the pin hole and secure with the clip. We will now measure from the ground to the top of the ball platform and our measurement is about 15 inches.