Impressive. Very happy with the cargo carrier and wow that was fast shipping.
Saint Louis, MS
Today on our 2012 Subaru Impreza, we'll be test fitting the Curt 20x48 Cargo Carrier for 1-1/4 and 2-inch hitches, part number C18145. Now, we removed the included adapter for the 2-inch hitch so we're ready to fit it to the vehicle. We'll slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. With our bolt tight, our cargo carrier is secured to the vehicle. Now, we'll go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is 3-1/2 inches and the cargo carrier will add an additional 23 inches of overall length to your vehicle.
Today on this 2010 Subaru Impreza Hatchback, were going to be test fitting Curts 20x48 cargo carrier, part number C18145. To mount the cargo carrier on our vehicle, well insert the shank of the carrier into our receiver hitch on our vehicle. Well line up the pinholes, insert the anti-rattle bolt and well tighten it down with a -inch wrench. Well go ahead and take a couple of measurements to check for clearance and exhaust spacing on our cargo carrier. We have about 8- inches of ground clearance from the bottom of the cargo carrier to the ground and we have about 3- inches of rear bumper clearance from the outermost edge of the bumper to the closest portion of the cargo carrier. We have about 9- inches from the exhaust tip to the closest edge of our cargo carrier.
Do you have a question?
Have a question about the best cargo carriers for your Subaru Impreza? click here.