Top 20 Most Popular Nissan Pathfinder Bike Rackschange vehicle

Yakima HighLite 2 Hitch Bike Rack Review - 2013 Nissan Pathfinder

Today on our 2013 Nissan Pathfinder, we'll be test fitting the YakimaHighlite Aluminum 2 Bike Carrier, Part Number Y02438. Now to begin ourtest fit, we'll slide the shank of the carrier into the opening of thehitch, line up our pinholes, insert the pin with the red knob into the pinholes, turn the black knob to engage our anti-rattle device. We'll go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 12 inches of ground clearance. Closest part of the carrier to the closest part of the vehicle, here at the vehicle's rear bumper is about six inches. With the the cradle arms folded down, we've added a total of 11 inches to the overall length of the vehicle.

Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Nissan Pathfinder

Today on our 2013 Nissan Pathfinder, we will be test fitting the Yakima Doubledown Ace 4 Bike Carrier part number y02451. Now to begin our test fit, we'll slide the shank of the carrier into the opening of the hitch, line up the pin holes, enter the pin with the red knob into the pinholes and turn the black knob at the back of the carrier to engage the anti-rattle device. Now we will go over a few clearance measurements to see how the biker carrier and this vehicle will fit together. There is about 12 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 7 inches. We have added a total of about 12 inches to the overall length of the vehicle.

Thule Vertex 4 Hitch Bike Rack Review - 2013 Nissan Pathfinder

Today on our 2013 Nissan Pathfinder, we'll be test fitting the Thule Vertex 4 Bike Carrier, Part Number TH9029. Now to begin our test fit, we'll slide the shank of the carrier into the opening of the hitch, line up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. Now, we'll go over a few clearance measurements to see how our bike carrier and this vehicle will fit together. There is about 13 inches of ground clearance. Closest part of the carrier to the closest part of the vehicle is about three inches. With the the cradle arms folded down, we've added about 13 inches to the overall length of the vehicle.

Thule Hitching Post Pro Hitch Bike Rack Review - 2013 Nissan Pathfinder

Today on our 2013 Nissan Pathfinder, we will be test fitting the Thule Hitching Post Pro part number th934xtr. Now to begin our test fit, we'll slide the shank of the carrier into the opening of the hitch, line up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. Now we will go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 12 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle, here at the rear bumper, is about 8 inches. With the cradle arms folded down, we've added about 18 inches to the overall length of the vehicle.

Thule Apex 4 Swing Hitch Bike Rack Review - 2013 Nissan Pathfinder

Today on our 2013 Nissan Pathfinder, we will be test fitting the Thule Apex Swing 4 Bike Carrier part number th9027. Now to begin our test fit, we will slide the shank of the carrier into the opening of the hitch, align up our pinholes, insert the spring-loaded pin through the pinholes and then turn the black knob to engage our anti-rattle device. With the carrier secured to the vehicle, we will go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 13 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 3 inches. We've added about 14 inches to the overall length of the vehicle.

Thule Apex 4 Hitch Bike Rack Review - 2013 Nissan Pathfinder

Today on our 2013 Nissan Pathfinder, we'll be test fitting the Thule Apex 4 Bike Carrier, Part Number TH9025. Now to begin our test fit, we'll first slide the shank of the carrier into the opening of the hitch, line up our pinholes, enter the spring loaded pin through the pinholes and turn our black knob to engage our anti-rattle device. And now that the carrier is secured to the vehicle, we'll go over a few clearance measurements to see how our bike carrier and this vehicle will fit together. There is about 13 inches of ground clearance. Closest part of the carrier to the closest part of the rear bumper is about three inches. With the the cradle arms folded down, we've added about 14 inches to the overall length of the vehicle.

Softride Dura Tilting Hitch Bike Rack Review

Today we are going to show you part number SR26247, the Softride Dura bike rack. Alright, we will start covering some of the features of this bicycle rack and again, we are showing you the 2 inch receiver version. You can tell you actually have two choices in installing it in your receiver hitch. You can keep it far away from the bumper or if you have plenty of room like in this combination we have, you can just go ahead and push it as far in as possible. And Dura bicycle rack does come standard with an anti-rattle bolt. It threads into the block on the inside of the bicycle rack. It threads into place. And what happens as it tightens down, it pulls the rack to one side of the hitch and keeps it from rattling. Once you get started you can use a 7/8 inch wrench. And the lock gets installed on top of it and comes with the bicycle rack also. 0:55

Highland Sportwing 2 Bike Hitch Rack Review

Today we are going to show you part number 5801200 from Highland. This is their Sportwing two-bike rack. This will fit 1-1/4 and 2- inch receiver hitches. We will go ahead and install this in a 2-inch receiver hitch and show you how it works. It is pretty simple. It does use two pieces of metal as a bushing to install in 2-inch receiver hitches. If you use 1-1/4 inch, you do not need the bushings. Again, we will show you how it goes together. We will use these two pieces here, that is going to be like a bushing, for a 2-inch receiver hitch. Basically, you just line them up together, like so. And you can orient these either way, depending on the depth of your hitch. So it is not a hard and fast rule to have them a certain orientation. And basically, you just line them up as best you can. Kind of grab them by the edge here, and then you can just go ahead and install it in the hitch. Put our pieces together, grab the ends, and install it in your hitch. And it is going to be loose for now. Install your anti-sway bolt. Take your flat washer and your lock nut - and it is a nylon lock nut - and just go ahead and tighten it down. The bicycle rack does come with the tool for the Allen head but you do need a separate wrench for the nut itself. And we use a 16-mm wrench on this nut. All right, and essentially what this does is that the bolt pulls the whole assembly to one side of the hitch and locks it into place so it cannot move.