Select Your Vehicle
view cartView Cart
Only 3 Hours 25 Minutes Remaining

Top 20 Most Popular Nissan Murano Bike Rackschange vehicle



#1Swagman XTC-2 - 2 Bike Platform Carrier for 1-1/4" and 2" Trailer Hitches

Swagman

Rating: ratingratingratingratingrating
297 reviews

S64670

Retail:$234.00

Price:$210.60


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Wheel and Frame Mount
Fixed Rack
Swagman

more information       





#2Pro Series Eclipse 4 Bike Rack for 2" Hitches - Tilting

Pro Series

Rating: ratingratingratingratingrating
136 reviews

63124

Retail:$149.99

Price:$109.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Locks Not Included

Product Specs:

Fits 2 Inch Hitch
Class 3
Frame Mount - Standard
Tilt-Away Rack
Pro Series

more information       



Questions from Nissan Murano owners about this product


  • 3 or 4 Bike Trailer Hitch Mount Bike Rack for a 2010 Nissan Murano
  • For 3 bike, trunk mounted racks both Thule and Yakima do not recommend using the racks on your 2010 Nissan Murano. Thule states that the carrier is not recommended because top straps should not be mounted directly to glass or plastic trim covering glass. Yakima states the same but adds if it must be done you must limit the load to only two bikes. You could install a hitch like the Hidden Hitch Class III Trailer Hitch Receiver, # 87486, and add a bike rack like the SportRack Escape 3 Bik
    view full answer...




#3Thule Hitching Post Pro - Folding Tilting 4 Bike Rack w Anti-Sway - 1-1/4" and 2" Hitches

Thule

Rating: ratingratingratingratingrating
37 reviews

TH934XTR

Retail:$228.96

Price:$199.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Folding Rack
Thule

more information       



Questions from Nissan Murano owners about this product


  • Will the Thule Roadway 4 Bike Carrier Fit 2009 Nissan Murano and Carry Children and Adult Bikes
  • Thule Hitching Post Pro 4 Bike Carrier, part # TH934XTR, will fit both Class I and II, 1-1/4 or 2 hitches. If you have a Class I, 1-1/4 inch hitch you will only be able to carry 2 bikes on this rack. You will want to check your hitch to make sure you do not exceed the tongue weight capacity when carrying the bike rack and bikes. The Thule Hitching Post Pro 4 Bike Carrier, part # TH934XTR, will work with your 2009 Nissan Murano in a 1-1/4 or 2 hitch. This bike rack has anti-sway cradles to
    view full answer...




#4Thule Vertex 2 Bike Carrier for 1-1/4" and 2" Hitches - Tilting

Thule

Rating: ratingratingratingratingrating
57 reviews

TH9028

Price:$249.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
2 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Folding Rack
Thule

more information       





#5Thule Doubletrack Platform-Style 2 Bike Carrier for 1-1/4" and 2" Hitches - Hitch Mount

Thule

Rating: ratingratingratingratingrating
234 reviews

TH990XT

Price:$319.95


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
Steel
Bike and Hitch Lock

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Wheel and Frame Mount
Folding Rack
Thule

more information       





#6Softride Dura Parallelogram 4 Bike Rack for 1-1/4" and 2" Hitches - Tilting

Softride

Rating: ratingratingratingratingrating
47 reviews

SR26247

Retail:$309.99

Price:$300.00


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Bike and Hitch Lock

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 2 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Swing-Away Rack
Softride

more information       





#7Thule Helium Aero 2 Bike Rack - 1-1/4" and 2" Hitches - Tilting - Aluminum

Thule

Rating: ratingratingratingratingrating
16 reviews

TH9042

Price:$349.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
2 Bikes
Aluminum
Bike and Hitch Lock

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1
Class 2
Frame Mount - Anti-Sway
Tilt-Away Rack
Folding Rack
Thule

more information       





#8Thule Parkway 4 Bike Rack for 2" Hitches - Tilting

Thule

Rating: ratingratingratingratingrating
51 reviews

TH956

Price:$219.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Locks Not Included

Product Specs:

Fits 2 Inch Hitch
Class 3
Frame Mount - Standard
Tilt-Away Rack
Thule

more information       



Questions from Nissan Murano owners about this product


  • What Hitch-Mount 4-Bike Carrier for 2009 Nissan Murano with DrawTite Hitch Installed
  • The Thule Parkway 4-Bike Rack for 2-inch Hitches, part # TH956, will fit your 2009 Murano equipped with Draw-Tite 2-inch hitch. This carrier provides a clearance distance between the center of the hitch pin hole and the carrier upright bar of 9-1/2 inches, and it tilts for easier access to your rear cargo area. I have included a video for the Parkway carrier. Another excellent option in a Thule 4-bike carrier is the Hitching Post Pro Folding Tilting 4 Bike Rack with Anti-Sway Cradles, part #
    view full answer...




#9Thule Helium Aero 3 Bike Carrier for 1-1/4" and 2" Hitches - Aluminum - Tilting

Thule

Rating: ratingratingratingratingrating
8 reviews

TH9043

Price:$389.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
3 Bikes
Aluminum
Bike and Hitch Lock

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Folding Rack
Thule

more information       





#10SportRack 2 Bike Carrier for 1-1/4" and 2" Hitches - Platform Style

SportRack

Rating: ratingratingratingratingrating
3 reviews

SR2901

Retail:$199.95

Price:$179.95


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Wheel and Frame Mount
Folding Rack
SportRack

more information       





#11Swagman XC - 2 Bike Rack Platform Style for 1-1/4" and 2" Trailer Hitches

Swagman

Rating: ratingratingratingratingrating
158 reviews

S64650

Retail:$180.00

Price:$160.95


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Wheel and Frame Mount
Folding Rack
Swagman

more information       





#12Rola TX-103 3 Bike Carrier for 1-1/4" and 2" Hitches - Tilting

Rola

Rating: ratingratingratingratingrating
19 reviews

59403

Retail:$198.73

Price:$149.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
3 Bikes
Steel
Bike Lock

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 2 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Folding Rack
Rola

more information       





#13Swagman Platform-Style 2 Bike Carrier for 2" Hitches or RV Bumpers

Swagman

Rating: ratingratingratingratingrating
65 reviews

S64663

Retail:$220.00

Price:$198.00


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
Locks Not Included

Product Specs:

Fits 2 Inch Hitch
Class 3
Wheel and Frame Mount
Folding Rack
Swagman

more information       





#14Yakima BigHorn 4 Bike Hitch Mounted Tilting Rack w Frame Mount Cradles for 2" Hitches

Yakima

Rating: ratingratingratingratingrating
68 reviews

Y02404

Retail:$199.00

Price:$179.10


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Locks Not Included

Product Specs:

Fits 2 Inch Hitch
Class 3
Frame Mount - Anti-Sway
Tilt-Away Rack
Yakima

more information       





#15Kuat NV - Aluminum Platform Style 2 Bike Rack for 2" Hitch

Kuat

Rating: ratingratingratingratingrating
27 reviews

N101

Retail:$549.00

Price:$529.00


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
Aluminum
Bike and Hitch Lock

Product Specs:

Fits 2 Inch Hitch
Class 3
Wheel Only Mount
Tilt-Away Rack
Folding Rack
Kuat

more information       





#16Thule Apex Swing 4 Bike Carrier for 2" Hitches - Swinging

Thule

Rating: ratingratingratingratingrating
24 reviews

TH9027

Price:$499.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Bike and Hitch Lock

Product Specs:

Fits 2 Inch Hitch
Class 3
Frame Mount - Anti-Sway
Swing-Away Rack
Folding Rack
Thule

more information       





#17Kuat NV 2 Bike Carrier - 2" Hitches - Platform Style - Aluminum - Black and Chrome

KuatN105

Retail:$549.00

Price:$529.00


Product Summary:

view all Hitch Bike Racks
Platform Rack
2 Bikes
Aluminum
Bike and Hitch Lock

Product Specs:

Fits 2 Inch Hitch
Class 3
Wheel Only Mount
Tilt-Away Rack
Folding Rack
Kuat

more information       





#18Thule Vertex 4 Bike Carrier for 1-1/4" and 2" Hitches - Tilting

Thule

Rating: ratingratingratingratingrating
56 reviews

TH9029

Price:$289.95


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 1 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Folding Rack
Thule

more information       





#19Prorack 2 Bike Carrier for 1-1/4" and 2" Hitches - Tilting

Prorack

Rating: ratingratingratingratingrating
29 reviews

PR8062403

Price:$89.00


Product Summary:

view all Hitch Bike Racks
Hanging Rack
2 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 Inch Hitch
Fits 2 Inch Hitch
Class 1 - 3 Compatible
Frame Mount - Standard
Tilt-Away Rack
Prorack

more information       





#20Softride Hydraulic-Assist Dura Tilting 4 Bike Rack for 1-1/4" and 2" Hitches

Softride

Rating: ratingratingratingratingrating
7 reviews

SR26321

Retail:$379.99

Price:$368.59


Product Summary:

view all Hitch Bike Racks
Hanging Rack
4 Bikes
Steel
Locks Not Included

Product Specs:

Fits 1-1/4 and 2 Inch Hitch
Class 2 - 3 Compatible
Frame Mount - Anti-Sway
Tilt-Away Rack
Folding Rack
Swing-Away Rack
Softride

more information       




Choose Your Year


Filter Racks by Type

Number of Bikes

All Other Bike Racks

Need a base rack?

What our customers are saying:

I got my hitch in three days. My husband put it on in less than an hour, he says it fit like a glove, no problems. We we're told by the dealer there wasn't a hitch for my Mazdda 6, I got it for a bike rack. Great service. Thanks

Jennene

Rapid City, SD






Nissan Murano Hitch Bike Racks Videos

Thule Doubletrack Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we'll be test fitting the Thule Doubletrack Platform-Style Two Bike Carrier, part number th990xt. Now to begin our test fit we'll simply slide the shank of the carrier into the opening of the hitch. Line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten with a wrench.Now that our Thule Doubletrack is secured to our Nissan Murano we'll go over a few clearance measurements to see how they fit together. We have about 11 inches of ground clearance. Closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 5-1/2 inches.With the platform folded up we've added about 12 inches to the overall length of the vehicle. We'll now pull the gray lever at the base of the carrier to tilt the platform down.



Thule Apex 4 Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we'll be test fitting the Thule Apex Four Bike Carrier, part number th9025. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch. We'll let the built-in pin go ahead and snap into position and then we'll move to the hand knob and engage our anti-rattle device.Now we'll go ahead and go over a few clearance measurements. We have about 14 inches of ground clearance. The closest point of the carrier to the rear of the vehicle is about 2-1/2 inches. With the bike rack in its folded position we've added about 12 inches to the overall length of our vehicle.



Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we'll be test fitting the Swagman XTC2 Two Bike Carrier, part number s64670. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch. Line up our pin hole and thread in our anti-rattle bolt. Now we can go ahead and tighten it with a wrench. Now we'll go ahead and go over a few clearance measurements.We have about 14 inches of ground clearance. We've added 20 inches to the overall length of our vehicle.



Swagman Titan Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we'll be test fitting the Swagman Titan Four Bike Carrier, part number s63410. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch. We'll line up the pin hole and thread in our anti-rattle bolt and go ahead and tighten it with a wrench.Now we'll go ahead and go over a few clearance measurements. We have a ground clearance of about 14 inches. With the bike rack in the folded position we've added about 19 inches to the overall length of our vehicle. Now we'll go ahead and pull the lever at the base of the carrier and allow our bike carrier to tilt.This gives us easy access to our rear hatch in our cargo area.



Yakima HighLite 2 Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Yakima Highlite Aluminum Two-Bike Carrier, part number y02438. To begin our test fit well slide the shank of the carrier into the receiver tip of our hitch. Well install the included pin and then go ahead and move to the hand knob to tighten down and engage our anti-rattle device. Now that our bike carrier is secured to our vehicle well go ahead and go over a few clearance measurements. We have a ground clearance of about 13 inches. The closest point of the carrier to the rear of the vehicle is about 3 inches.



Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we'll be test fitting the Yakima Doubledown Ace Four Bike Carrier, part number y02451. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch. Then we'll go ahead and place the included pin into position. Now we'll move to the rear of the shank where we'll use the hank knob to engage our anti-rattle device.Now we'll go ahead and go over a few clearance measurements. We have about 13 inches of ground clearance. The closest part of the carrier to the rear of the vehicle is about four inches.



Thule Vertex 4 Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we'll be test fitting the Thule Vertex Four Bike Carrier, part number th9029. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch. Line up the pin hole and thread in our anti-rattle bolt. Go ahead and tighten it with a wrench and secure with the lock on the other side.Now we can go ahead and go over a few clearance measurements. We have about 13-1/2 inches of ground clearance. From the closest part of the carrier to the rear of the vehicle is about two inches.



Thule T2 Platform Style Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano we'll be test fitting the Thule T2 Platform-Style Two Bike Carrier, part number th916xtr. To begin our test fit we'll simply slide the shank of the carrier into the opening of the hitch. Line up our pin holes and install and tighten down our anti-rattle bolt. Now with our Thule T2 secured to our Nissan Murano we'll go over a few clearance measurements to see how they fit together.With the platform folded up we have about 11 inches of ground clearance. Closest part of the carrier to the closest part of the vehicle here at the rear bumper is about four inches. We've added about 14 inches to the overall length of the vehicle.



Thule Hitching Post Pro Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano, we'll be test-fitting the Thule Hitching Post Pro Folding Tilting Four-Bike Rack, Part number TH934XTR. To begin our test-fit, we'll slide the shank of the carrier end of the receiver to the hitch, line up the pinhole, and thread in our anti-rattle bolt, tightening that with a wrench. Now, we'll go ahead and go over some clearance measurements. We have about 13 1/2 inches of ground clearance. From the closest part of the carrier to the rear of the vehicle is about 5 inches. With the bike carrier in its folded position, we've added about 16 inches to the overall length of our vehicle.



Thule Helium Aero Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Thule Helium Aero 2-Bike Carrier, part number th9042. Now to begin our test fit, well simply slide the shank of the carrier into the opening of the hitch, line up our pin holes, allow the integrated pin to fall into place and well then turn the black knob to engage the anti-rattle device. Now that our Thule Helium is secured to our Nissan Murano, well go over a few clearance measurements to see how they fit together. We have about 18 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 9 inches, and with the cradle arms folded down weve added about 19 inches to the overall length of the vehicle. Well now pull the gray lever at the top of the mast to swing the cradle arms out, and with the cradle arms out weve added about 30 inches to the overall length of the vehicle.



Thule Apex 4 Swing Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano, we'll be test fitting the Thule Apex Swing 4-bike carrier, part number TH9727. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch, allow the attached pin to slip into position, and then move to the rear of the shank and hand-tighten our anti-rattle device. Now we can go ahead and go over some clearance measurements. We have about 14" of ground clearance. The closest part of the carrier to the rear of the vehicle is about 2". With the bike carrier in the folded position, we've added about 12" to the overall length of our vehicle.



Rola TX-104 Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano, well be test fitting the Rola TX 104 4-Bike Carrier for Two Inch Hitches, Part Number 59401. To begin our test fit, well slide the shank of the carrier into the receiver tube of our hitch, line up the hitch pinhole then well thread in our anti-rattle bolt and tighten it with a wrench.At this point, we can go ahead and install the clip on the other side. Now, well go ahead and go over a few clearance measurements. We have a ground clearance of about 13-1/2 inches. The closest point of the carrier to the closest part of the rear of our vehicle is about 5 inches. With the bike carrier in the folded position, weve added about 10 inches to the overall length of our vehicle.Now, well go ahead and pull the pin at the base of the carrier to allow our carrier to tilt.



Softride Dura Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Softride Dura Parallelogram tilting four bike carrier part #: SR26247. To begin our test fit well slide the shank of the carrier into the receiver tube of our hitch. Well go ahead and line up the pinhole and then thread in our anti-rattle bolt, tightening it with a wrench and then securing it with a lock. Now we can go ahead and go over a few clearance measurements. We have a ground clearance of about 13 and a half inches. The closest part of the carrier to the rear of the vehicle is about four and a half inches and weve added 35 inches to the overall length of or vehicle.



Rhino-Rack 4 Hitch Bike Rack Review - 2013 Nissan Murano

Today, on our 2013 Nissan Murano, well be test fitting the Rhino Rack 4-Bike Carrier, Part Number RBC038.To begin our test fit, well slide the shank of the carrier into the receiver tube of our hitch, well line up our pinhole and thread in our anti-rattle bolt, tightening it with a wrench and then securing the lock into place.Now, well go ahead and go over a few clearance measurements. We have a ground clearance of about 13-1/2 inches. From the closest point of the carrier to the rear of our vehicle is about 4-1/2 inches. With the bike carrier in its folded position, weve added about 11-1/2 inches to the overall length of our vehicle.Now, well go ahead and pull the pin at the base of the carrier to allow our carrier to tilt. This allows us to gain easy access to the rear hatch of our vehicle, so that we can access our cargo area when we need to.Now, well put the carrier back in its upright position, replace the pin and then well move to the top of the mast, where well pull the pin to swing out our dual arms. With these extended, weve added about 29 inches to the overall length of our vehicle.Now, well go ahead and undo the cradle straps, well grab our bike, place it into the cradles and use the straps to secure it.



Prorack 2 Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Pro Rack two bike carrier part #: PR8062403. To begin our test fit well slide the shank of the carrier into the receiver tube of our hitch, line up the pinhole and then thread in our anti-rattle bolt and tighten it with a wrench. Now well go ahead and go over a few clearance measurements. We have about 13 inches of ground clearance. From the closest point of the carrier to the rear of the vehicle is about two inches. Weve added about 23 inches to the overall length of our vehicle.



Prorack Platform Style Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Pro Rack two bike carrier for one and a quarter inch and two inch hitches platform style, part #: PR8062400. To begin our test fit well slide the shank of the carrier into the receiver tube of our hitch, line up the pinhole and then thread in our anti-rattle bolt, securing it and tightening it with a wrench. Now well go ahead and go over a few clearance measurements. We have about 14 inches of ground clearance. The closest part of the carrier to the rear of the vehicle is about four and a half inches. Weve added 21 inches to the overall length of our vehicle.



Pro Series Eclipse 4 Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Pro Series Eclipse four bike carrier part #: 63124. To begin our test fit well simply slide the shank of the carrier into the opening of our hitch, line up our pinholes, thread our anti-rattle bolt through the pinholes and tighten it with a wrench. Now with our Pro Series Eclipse secured to our Nissan Murano well go over a few clearance measurements to see how they fit together. We have about 11 and a half inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about six inches and weve added about 33 inches to the overall length of the vehicle. To access the cargo area well pull the silver pin at the base of the carrier to tilt the mast down.



Kuat Sherpa Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Kuat Sherpa aluminum platform style hitch mounted two bike carrier part #: S102. To begin our test fit well slide the shank of the carrier into the receiver tube of our hitch. Well go ahead and line up the pinhole and then install our pin and clip. Then well move to the back of the shank where well find the hand knob. We can tighten this to engage our anti-rattle device and secure our rack to our vehicle. Now well go ahead and go over some clearance measurements.



Kuat NV Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano, well be test fitting the Kuat NV Aluminum Platform Style 2-Bike Carrier, part number N101. To begin our test fit, well slide the shank of our carrier into the receiver tip of our hitch. Line up the pinhole and then install our pin and clip. Now move to the rear of the shank and tighten the hand knob to engage our anti-rattle device. Now well go ahead and go over a few clearance measurements. We have about 13 inches of ground clearance.



Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano, well be test fitting the Hollywood Racks Traveller 5-Bike Carrier, part number HR9200. To begin our test fit, well slide the shank of the carrier into the receiver tip of our hitch. Line up the hitch pin hole and thread in our anti-rattle bolt, tighten it in with a wrench. Now well go and go over a few clearance measurements. We have about 13 inches of ground clearance. From the closest form of the carrier to the rear of the vehicle is about 6 inches.





Nissan Murano Roof Bike Racks Videos

Swagman Fork Down Roof Bike Rack Review - 2009 Nissan Murano

Today on our 2009 Nissan Murano, we'll be test fitting the Swagman Fork Down roof-mounted bike carrier, part number S64710. With the factory roof rack system assembled onto our vehicle, we'll place our bike rack directly onto our crossbars. We'll begin at the front by taking the U bolts around the underside of the crossbar, and feeding them up through the platform of our bike rack. Once we have them through the platform, we can then install the wing nut to tighten them in place. We'll do this for both sides of the front platform. Here at the rear, we'll drop the U bolt through the top of the carrier, making sure it goes around our crossbar.



Rola Roof Bike Rack Review - 2009 Nissan Murano

Today on our 2009 Nissan Murano, we'll be test fitting the Rola roof-mounted bike carrier, part number 59404. With the factory roof rack system assembled onto our vehicle, we'll begin our test fit by placing our bike rack directly onto our crossbars. Here at the front, we'll want to fit our bracket around our front bar. We'll feed the bolt through the holes of each bracket, install the nut, and tighten it down with the included tool. Once that's tight, we can then move to the rear and repeat the same process. In order to load our bike, we'll need to make sure that the rear wheel strap is undone, and that the skewer at the front is loose.



RockyMounts TieRod Stretch Roof Bike Rack Review - 2009 Nissan Murano

Today on our 2009 Nissan Murano, we'll be test fitting the RockyMounts Tierod Stretch roof-mounted bike carrier, part number RKY1011. With the factory roof rack system assembled onto our vehicle, we'll begin our test fit by placing the Tierod Stretch directly onto our crossbars. Here at the front, we'll bring the rubber-coated straps around our front crossbar, fitting them back into the head of the carrier. We can then remove the black plastic cover and use an Allen key to tighten the Allen bolt, to tighten our straps around our crossbars. Once we have those straps tight, we can then reinstall the black plastic cover. Here at the rear, we'll loosen up the bolt so that we can fit our rear clamp around our rear bar.



Yakima FrontLoader Roof Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Yakima Frontloader Wheel Mount Bike Carrier, part number y02013. To begin our test fit well go ahead and place the carrier on top of our crossbars. Well go ahead and make sure that the front and rear clamps of our carrier go around our front and rear crossbars. Now we can use the hand knob at the very front of the carrier to tighten down our front clamp. Then we can move to the rear of the carrier where we can use the hand knob on the top of the carrier to secure our rear clamp. Now before we load our bike we need to make sure that our wheel strap in the rear is undone and that our wheel tray is open in the front.



Yakima ForkLift Roof Mounted Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Yakima Forklift roof mounted bike carrier, part number Y02098. To begin our test fit well go ahead and set our carrier on top of our crossbars. Once we have it situated the way we like we can then go ahead and tighten down our front clamp by using the wing knob. Once we have our front clamp secured, we can then go ahead and slide our skewer holder back into place and reinstall our skewer. Once we have that tight we can then go ahead and move to the rear. Well make sure that our clamp is around our rear crossbar then well go ahead and tighten it down using the included wing hand knob.



Thule Domestique Roof Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Thule Domestique Fork Mount Bike Carrier, part number th513. Now I went ahead and already removed the skewer so that I could access the Allen bolts to loosen our clamp. To begin our test fit well go ahead and place the carrier on top of our crossbars so we want to make sure that that front clamp goes around the front crossbar. Once we have the clamps in place, we can then go ahead and use an Allen key to tighten down the Allen bolts in the front. When we have that clamp secure, we can then go ahead and move to the rear and tighten that one down as well. Now we can go ahead and reinstall our skewer leaving it open for when we get ready to load our bike.



Thule Circuit Roof Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the Thule Circuit Roof Mounted Bike Carrier, part number th526. I already removed the front skewer to loosen the clamp for an easier install. To begin our test fit well go ahead and set the carrier on top of our crossbars. Then what we want to do is we want to make sure that the front clamp goes around the front crossbar. Then we want to hold the front nose lever straight up as we hand tighten the knob on the other end of the bolt. Once we get the hand knob snug, we can then press down on the front nose lever to finish tightening that bolt.



Swagman Fork Down Roof Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano, we'll be test fitting the fork-style roof-mounted bike carrier from Swagman, part number S64710. To begin our test fit, we'll go ahead and lay the carrier on top of our crossbars. Now we'll go ahead and take the U bolts and place two of them up front. We want to make sure that we bring these up from the bottom. Then we can use the wing nuts to tighten them down. Now we can move to the rear of the carrier, where we'll install the U bolt from the top, run in through the clamp on the bottom, and then tighten with the wing nuts.



RockyMounts TieRod Roof Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the RockyMounts Tie Rod roof mounted bike carrier part #: RKY1014. To begin our test fit well place the carrier on top of our crossbars. We want to make sure that the rubber coated steel straps at the front go around our front crossbar and that the bracket in the rear goes around our rear crossbar. Once we have those in place we can then go ahead and tighten at the front by using an Allen key to tighten down the bolt. Then we can move to the rear to use an Allen key to tighten down our rear clamp. Once we have that tight we can then go ahead and move back to the front and reinstall our cover over our skewer.



RockyMounts TieRod Stretch Roof Bike Rack Review - 2013 Nissan Murano

Today on our 2013 Nissan Murano well be test fitting the RockyMounts Tie Rod Stretch roof mounted bike carrier part #: RKY1011. To begin our test fit well go ahead and place the carrier on top of our crossbars. Then we can go ahead and remove the plate thats covering the front part of our carrier. Well take the rubber coated steel straps, put them underneath the front crossbar and then lock them back into position. Then we can move to the rear where well take out the Allen bolt, swing our clamp around the rear crossbar and put it back into place. Then we can move back up to the front where well take an Allen key and tighten down those straps.



RockyMounts PitchFork Roof Bike Rack Review - 2013 Nissan Murano

Today, on our 2013 Nissan Murano, well be test fitting the RockyMounts PitchFork Roof-Mounted Bike Carrier, Part Number RKY0438.To begin our test fit, well place the carrier on top of our crossbars. Now, I already removed the cover covering the skewer and I already removed the skewer, so that I can unscrew the clamp bolts inside.Once we have the carrier on top of our crossbars, we can then go ahead and fit the clamp around the front crossbar from underneath the carrier and use an allen key to tighten it into position. Once we have that tightened, we can the move to the rear, fit the clamp around the crossbar and use the included bolt and wing nut to tighten it into position.Also at the front, we want to make sure that we will replace our skewer and that we place back our cover. With that our bike rack is secured to our roof rack system and were ready to load our bike.We can then grab our bike, place it into position, making sure that our front forks are into our skewer then we can secure first using the skewer and tightening it down. Now, well move to the rear, where well tighten the wheel strap.With that done, our bike is all loaded up and were ready to go. That completes todays test fit of the RockyMounts PitchFork Roof-Mounted Bike Carrier, Part Number RKY0438 on our 2013 Nissan Murano..





Nissan Murano Hitch Bike Racks Questions



Nissan Murano Roof Bike Racks Questions



Nissan Murano Trunk Bike Racks Questions




Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email



Only 3 Hours 25 Minutes Remaining

etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com