Top 20 Most Popular Kia Sportage Bike Rackschange vehicle

Yakima HighLite 2 Hitch Bike Rack Review - 2011 Kia Sportage

Today on our 2011 KIA Sportage, we'll be test fitting the Yakima HighLite Aluminum 2-Bike Carrier, part number Y02438. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch, line up the pin hole, and install our included pin. Now we'll move to the rear of the shank where we'll use the hand knob to secure our bike carrier to the vehicle and engage our anti-rattle device. We'll go ahead and go over some key measurements. We have a ground clearance of 10-1/2 inches. The closest point of the carrier to the rear of the Sportage is 3 inches.

Yakima DoubleDown Ace Hitch Bike Rack Review - 2011 Kia Sportage

Today on our 2011 KIA Sportage, we'll be test fitting the Yakima DoubleDown Ace 4-Bike Carrier, part number Y02451. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our included pin. We'll move to the rear of the shank and use the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now we'll go over some key measurements. We have about 10-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Sportage is about 3-1/2 inches.

Thule Vertex 4 Hitch Bike Rack Review - 2011 Kia Sportage

Today on our 2011 Kia Sportage, we'll be test fitting the Thule Vertex 4 Bike Carrier, part number TH9029. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and thread in our anti-rattle bolt, tightening it with a wrench. Now, we'll go over some key measurements. We have about 13 inches of ground clearance. The closest point of the carrier to the rear of the Sportage is about an inch.

Thule Hitching Post Pro Hitch Bike Rack Review - 2011 Kia Sportage

Today on our 2011 Kia Sportage, we'll be test fitting the Thule Hitching Post Pro 4 Bike Carrier, part number TH934XTR. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and thread in our anti-rattle bolt, tightening it with a wrench. Now, we'll go ahead and go over some key measurements. We have about 10-1/2 inches of ground clearance. The closest point of the carrier to the rear of the Sportage is about 5 inches.

Thule Helium Aero Hitch Bike Rack Review - 2011 Kia Sportage

Today on our 2011 Kia Sportage, we'll be test fitting the Thule Helium Aero 2 Bike Carrier, part number TH9042. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, allowing the included pin to fall into place. Then we'll move to the rear of the shank and use the hand knob to secure our bike rack to our vehicle and engage the anti-rattle device. Now, we'll go ahead and go over a few key measurements. We have about 14-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Sportage is about 2 inches.

Thule Apex 4 Swing Hitch Bike Rack Review - 2011 Kia Sportage

Today on our 2011 Kia Sportage, we'll be test fitting the Thule Apex Swing 4 Bike Carrier, part number TH9027. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch and allow the included and attached pin to fall into place. Well then move to the rear of the shank and use the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now, we'll go over some key measurements. We have about 12 inches of ground clearance. The closest point of the carrier to the rear of our Sportage is about 2 inches.

Thule Apex 4 Hitch Bike Rack Review - 2011 Kia Sportage

Today on our 2011 Kia Sportage, we'll be test fitting the Thule Apex 4 Bike Carrier, part number TH9025. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, allowing our included and attached pin to fall into place. Well then move to the rear of the shank and use the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now, we'll go over some key measurements. We have about 12 inches of ground clearance. The closest point of the carrier to the rear of our Sportage is 3 inches.

Softride Dura Hitch Bike Rack Review - 2011 Kia Sportage

Today on our 2011 Kia Sportage, we'll be test fitting the Softride Dura Parallelogram Tilting 4 Bike Rack, part number SR26247. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and thread the anti-rattle bolt and then install our lock. Now, we'll go ahead and go over some key measurements. We have a ground clearance of 11 inches. The closest point of the carrier to the rear of our Sportage is about 1 inch.

Pro Series Q-Slot Hitch Bike Rack Review - 2011 Kia Sportage

Today on our 2011 Kia Sportage, we'll be test fitting the Pro Series Q Slot Platform Style 2 Bike Carrier, part number PS63134. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and install our pin and clip. Now, we'll go ahead and go over a few clearance measurements. We have about 13-1/2 inches of ground clearance. The closest point of the carrier to the rear of the Sportage is about 7 inches.

Pro Series Eclipse 4 Hitch Bike Rack Review - 2011 Kia Sportage

Today on our 2011 Kia Sportage, we'll be test fitting the Pro Series Eclipse 4 Bike Hitch Mounted Folding Rack with Frame Mount Cradles for 2-inch hitches, part number 63124. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch. We'll line up the pin hole and thread in our anti-rattle bolt, tightening it with a wrench. Now, we'll go ahead and go over a few clearance measurements. We have about 10-3/4 inches of ground clearance. The closest point of the carrier to the rear of our Sportage is about 3 inches.

Prorack 2 Hitch Bike Rack Review - 2011 Kia Sportage

Kuat Beta Hitch Bike Rack Review - 2011 Kia Sportage

Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2011 Kia Sportage

Hollywood Racks Traveler Hitch Bike Rack Review - 2011 Kia Sportage

Thule Hitching Post Pro Hitch Bike Rack Review - 2009 Kia Sportage

Today on our 2009 Kia Sportage well be test fitting the Thule Hitching Post Pro Folding and Tilting Bike Carrier, part number TH934XTR. Now to begin our test fit we'll simply place the bike rack shank into the hitch, line up the hitch pin hole and install our anti-rattle bolt. With our bolt tight our bike rack is secured to the vehicle. Now we'll go ahead and give you a few measurements. Our ground clearance is 10-1/4 inches and from the closest point of the bike rack to the back of the vehicle is 5-1/2 inches. Now we'll go ahead and pull the pin at the bottom of the bike rack mast to tilt the mast down where we can open our cargo door.

Thule Apex 4 Hitch Bike Rack Review - 2009 Kia Sportage

Today on our 2009 Kia Sportage well be test fitting the Thule Apex 4 Bike Carrier, part number TH9025. To begin our test fit we'll simply slide the bike rack shank into the hitch, we'll make sure to pull the integrated locking hitch pin as it slides over the hitch itself. Once the hitch pin is lined up with the hole and the hitch the hitch then will lock into place. We can then tighten down our anti-rattle knob on the back of the bike rack securing it to the vehicle. Now we'll go ahead and give you a few measurements. Our ground clearance at the bike rack is 11-1/2 inches and from closest point of the bike rack to the back of the vehicle is 2 inches.

Thule Vertex 4 Hitch Bike Rack Review - 2009 Kia Sportage

Today on our 2009 Kia Sportage, we'll be test fitting the Thule Vertex Four-Bike Carrier, part number TH9029. Now to begin our test fit, we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole, and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. Now we'll go ahead and give you a few measurements. Our ground clearance at the bike rack is 10 3/4 inches and from the closest point of the bike to the back of the vehicle is an inch and a half. Now we'll go ahead and pull the hitch switch at the bottom of the bike rack mast.

Thule Parkway 2 Hitch Bike Rack Review - 2009 Kia Sportage

Today on our 2009 Kia Sportage, we'll be test fitting the Thule Parkway Two-Bike Carrier, part number TH958. Now to begin our test fit, we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole, and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. Now we'll go ahead and give you a few measurements. Our ground clearance at the bike rack is 10 3/4 inches and from the closest point of the bike to the back of the vehicle is a mere half an inch. We'll now go ahead and pull the pin at the bottom of the bike rack mast to tilt the mast down.

Thule Helium Hitch Bike Rack Review - 2009 Kia Sportage

Today on our 2009 Kia Sportage, we'll be test fitting the Thule Helium Aluminum Two-Bike Carrier, part number TH970XT. To begin our test fit, we'll simply slide the bike rack shank into the hitch, and using the attached hitch pin, we'll slide it into place. We can then tighten down our anti-rattle knob on the back of the bike rack. This will secure our bike rack to the vehicle. Now we'll go ahead and give you a few measurements. Our ground clearance at the bike rack is 10 1/4 inches and from the closest point of the bike rack to the back of the vehicle is three and a quarter inches.

Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2009 Kia Sportage

Today on our 2009 Kia Sportage, we'll be test fitting the Swagman XTC2 Bike Carrier, part number S64670. To begin our test fit, we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. We'll now go ahead and give you a few measurements. Our ground clearance at the bike rack is 14 1/2 inches and from the closest point of the bike to the back of the vehicle is two inches. Now we'll go ahead and fold the bike rack platform down and open our cargo door.

Thule Domestique Roof Bike Rack Review - 2008 Kia Sportage

Today on this 2008 Kia Sportage well be test fitting the Thule Domestique Roof-Mounted Bike Carrier part number TH513. Our Sportage already has a full roof rack from the factory installed on it, so we can just go ahead and set our carrier on top of this roof system. Well fit the front clamp around our front bar and well use the included Allen key to tighten it down. Once weve done that we can go ahead and re-install our front skewer. At the rear well fit the clamp around our rear bar and again use the Allen key to tighten it down. Well set the rear wheel into the tray and position the front fork down into the skewer.

RockyMounts TieRod Roof Bike Rack Review - 2008 Kia Sportage

Today on our 2008 Kia Sportage, we are going to be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part number RKY1014. Our Sportage is already equipped with a full factory roof rack system, so were going to mount our tierod directly to the factory crossbars. To do this, well set the carrier up on top of the crossbars, well then take the rubber coated steel strap at the front of the carrier, wrap them around our crossbars and re-secure them to the head. At this point we can go ahead and tighten it down with an Allen key. At the rear of the vehicle we will take the clamp, fit it around our rear crossbar and use the wing nuts to tighten down the rear clamp. Once thats all done our bike rack is installed and were ready to start putting a bike on.

RockyMounts TieRod Roof Bike Rack Review - 2007 Kia Sportage

Today on our 2007 Kia Sportage, well be test-fitting the RockyMounts TieRod Roof-Mounted Bike Carrier part number RKY1014. Now we begin our test fit by placing our bike rack on top the crossbars and well make sure that the rubber coated steel straps at the head of the bike rack move underneath the front crossbar. Well loosely clip them back to the head of the bike rack where well then move to the rear crossbar and put the clamp underneath the crossbar and secure it using the wing nuts. Well move back up to the head of the bike rack while were tying down the Allen bolt securing the rubber coated steel straps to the front crossbar. We can then open up our front skewer preparing our bike rack for the front fork of our bike, then well move back to the rear wheel strap while were under the strap to make sure its out if the way. Well place the bike in to the carrier making sure that the front fork falls into to the skewer.