Top 20 Most Popular Kia Sorento Cargo Carrierschange vehicle

Curt Hitch Cargo Carrier Review - 2012 Kia Sorento

CarPod Folding Cargo Carrier Review - 2012 Kia Sorento

Today on our 2012 Kia Sorento well be test fitting part number M2205. This is the Carpod 24 by 48 walled folding cargo carrier for two inch hitches, rated at 450 pounds. Well begin our test fit by sliding the cargo carrier shank into the hitch, lining up the hitch pin holes and installing our hitch pin. We can then put the clip on the other side of the pin which will secure the cargo carrier to the vehicle. Well now go ahead and unfold the platform of our Carpod flat. Well pull the pin, allow the platform to fold down and reinstall the pin.

Surco Hitch Cargo Carrier Review - 2013 Kia Sorento

Surco Hitch Cargo Carrier Review - 2012 Kia Sorento

Today on our 2012 Kia Sorrento well be test fitting the Surco 24 inch by 60 inch cargo carrier for two inch hitches, part number 52018. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin hole and then secure the carrier with a standard 5/8 inch pin and clip. Now well go over a handful of clearance measurements. Weve got about 9 inches of ground clearance at the rear of the carrier. Theres about 1 inches of clearance between the closest part of the bumper and the closest part of the carrier.

Pro Series Hitch Cargo Carrier Review - 2012 Kia Sorento

Today on our 2012 Kia Sorrento well be test fitting the Pro Series 24 inch by 60 inch railed cargo carrier for two inch hitches, part number 63153. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up the hitch pin holes and secure the carrier with a standard 5/8 inch pin and clip. Now well go over a handful of clearance measurements. Weve got about 13 inches of ground clearance at the rear of the carrier and about 8 inches of clearance between the closest part of the carrier and the closest part of our bumper. Overall weve added about 34 inches of length to the rear of the vehicle.

Curt 20x60 Folding Aluminum Cargo Carrier Review - 2013 Kia Sorento

Toda on our 2013 Kia Sorrento well be test fitting the Curt 20 by 60 folding cargo carrier, part number C18100. To begin our test fit well slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install our hitch pin. With the pin in well put the clip on the other side which will secure our cargo carrier to the vehicle. Now well go ahead and give you a few measurements. Our ground clearance of the carrier with the platform folded up is nine inches and from the closest point of the carrier to the back of the vehicle is two and a half inches. Well now pull the pin here at the base where we can then fold down the cargo carrier platform.

Rola Hitch Cargo Carrier Review - 2013 Kia Sorento

Today on our 2013 Kia Sorento well be test fitting the 23 x 56 rail cargo carrier from Rola, part number 59502. Now, to begin our test fit, well slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install our hitch pin. Well then put the clip on the other side of the pin, which will secure the cargo carrier to the vehicle. Well now go ahead and give you a few measurements. From the closest point on the cargo carrier to the back of the vehicle is eight inches, and the cargo carrier will add an additional 32 inches of overall length to the vehicle. Our ground clearance at the back of the carrier is 13 inches, and the tail pipe on this vehicle does exit the passengers side here at the rear bumper.

Curt Hitch Cargo Carrier Review - 2013 Kia Sorento

Today on our 2013 Kia Sorento well be test fitting the Curt 20 x 48 cargo carrier for both inch and a quarter and two inch hitches, part number C18145. To begin our test fit, using the included adapter for the two inch hitch well slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. Now that the bolt is tight, our cargo carriers secured to the vehicle and were ready to load it up. Well now go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is two inches, and the cargo carrier will add an additional 21 inches of overall length to the vehicle. Our ground clearance at the back of the carrier is 10 inches, and the exhaust on this vehicle does exit the passengers side here at the rear bumper.

Pro Series Hitch Cargo Carrier Review - 2013 Kia Sorento

Today on our 2013 Kia Sorento, well be test fitting the Pro Series 24x60 Railed Cargo Carrier for 2 hitches, part number 63153. Now all we need to do is slide the cargo carrier shank into the hitch, line up the hitch pin hole and install our hitch pin, we can then put the safety clip on the other side of the pin which will secure our cargo carrier to the vehicle. Well now go ahead and give you a few measurements, our ground clearance at the cargo carrier is 15-1/2 from the closest point of the carrier to the back of the vehicle is 8 and the carrier will add an additional 33-1/2 of overall length to the vehicle. Now when opening the tailgate the door leaves 21 between the door and the platform itself, while still being able to get the door open and that completes the test fit of the Pro Series 24x60 Railed Cargo Carrier, part number 63153 on our 2013 Kia Sorento.

Thule MOAB Roof Top Cargo Basket Review - 2013 Kia Sorento

Today on our 2013 Kia Sorrento well be test fitting part number TH690, the Thule Moab rooftop cargo basket. Now to begin our test fit our vehicle is already equipped with the Thule roof rack system so well simply place our basket on top of our crossbars making sure that the clamps line up directly over the top of both crossbars. If need be you can move the clamps as well as the crossbars in order to accommodate the roof basket. Now with our basket placed on top of the roof well make sure that its centered with the vehicle. Where well then take the clamps, make sure they go underneath the crossbars and secure them on the other side with the bolt and wing nut. Well do this in all four corners of our basket securing our basket to the roof of the vehicle.

Yakima RocketBox Pro 11 Rooftop Cargo Box Review - 2013 Kia Sorento

Today on our 2013 Kia Sorento, well be test fitting the Yakima Rocketbox Pro 11 Rooftop Cargo Box measuring 11 cubic feet in black, part number Y07193. Now our vehicles already equipped with the Yakima RailGrab Roof Rack System and weve already gone ahead and preassembled our Rocketbox, so were ready to fit it to the vehicle. Well simply place our Rocketbox on top of our crossbars, making sure that the clamps are just in front of the crossbars themselves. Well then open up the clamps where we can then slide the box backward toward the rear of the vehicle allowing the clamps to engage on the bars. Well then open the lid where we can tighten the red knobs securing our box to the roof. With all four knobs tight, our Rocketbox is on and were ready to load it up.

Yakima LoadWarrior Roof Cargo Basket Review - 2013 Kia Sorento

Today on our 2013 Kia Sorento, well be test fitting the Yakima Load Warrior Roof Rack Cargo Basket, part number Y07070. To being our test fit, well first set the cargo basket on top of the crossbars and position it center on the crossbars. Once the basket has been centered onto the crossbars, you can then swing the brackets underneath the crossbars and secure them with the wingnut. Once all the brackets have been tightened down, youre ready to load it up. That completes todays test fit of the Yakima Load Warrior Roof Rack Cargo Basket, part number Y07070 on our 2013 Kia Sorento. .

Rola Roof Cargo Basket Installation - 2012 Kia Sorento

Today on our 2012 Kia Sorento, well be test fitting the ROLA Roof-Mounted Cargo Basket part number 59504. Now with our vehicle already equipped with a roof rack system, well simply set the cargo basket on top of the crossbars and well need to make sure that the plastic inserts for the basket are evenly separated. We can then use the clamps included with the basket to secure it to vehicle. With all our clamps tight, our basket is secured and were ready to go ahead and load it up. And that completes the test fit of the ROLA Roof-Mounted Cargo Basket part number 59504 on our 2012 Kia Sorento.

Thule MOAB Roof Top Cargo Basket Review - 2006 Kia Sorento

Today we are going to do a test fit of Thule MOAB Roof Top Cargo Carrier on our 2006 Kia Sorento, part number th690. This roof basket has a crossbar spread of 16 to 28. With the feet on our basket already setup with the crossbars on our vehicle, we will go ahead and slip it on and see what it looks like. Alright once we get our roof basket on top of the vehicle, I like to center it up so that it is aesthetically pleasing. Now we can go ahead and install our clamps. When tightening down the wing nuts of your clamps you just want to make sure that front to back they are tightened down evenly.