Top 20 Most Popular Jeep Liberty Bike Rackschange vehicle

SportRack Escape 3 Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty, we'll be test fitting the SportRack Escape 3 Bike Hitch Mounted Bike Carrier, part number A30403. Now, this bike carrier will work with both 1-1/4 and 2-inch hitches. Today, we'll be using it with a 2-inch hitch so we've already gone ahead and install the included adapter onto the bike rack shank. We can now slide the shank of the bike rack into the hitch, line up the hitch pin hole, and using the included anti-rattle bolt, we'll insert it and tighten it down, securing the bike rack to the vehicle. Now with the bike rack secured, we can go ahead and give you a few measurements. Our ground clearance here at the back of the bike rack measures 17-1/2 inches and from the closest point of the bike rack here at the mast to the back of the vehicle measures 12-1/2 inches.

Kuat Sherpa Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty, we'll be test fitting the Kuat Sherpa Aluminum Hitch Mounted 2 Bike Rack with Wheel Mount Cradles, part number S102. Now using the included 2-inch adapter, we'll slide the bike rack shank into the hitch, line up the hitch pin hole, and insert our hitch pin. We'll then move to the back of the shank where we'll turn the knob, tightening down the anti-rattle device securing the bike rack to the vehicle. We'll now go ahead and give you a few measurements. Our ground clearance here at the back of the bike rack with the platform in the stored position measures 22-1/2 inches. From the closest point of the bike rack here at the wheel cradle to the back of the vehicle measures 6 inches.

Hollywood Racks Sport Rider Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty, we'll be test fitting the Hollywood Racks Sport Rider 2 2-Bike Carrier for 1-1/4 and 2-inch hitches, part number HR1000. Now to begin our test fit using the included 2-inch adapter, we'll slide the shank of the bike rack into the hitch, line up the hitch pin hole, and install and tighten down the anti-rattle bolt. With the bolt tight, our bike rack is secured to the vehicle. We'll now go ahead and give you a few measurements. Our ground clearance here at the back of the bike rack measures 23 inches and from the closest point of the bike rack to the back of the vehicle here at the wheel loop measures 12-1/2 inches. We'll now go ahead and unfold the bike rack platform and open our cargo door.

Thule Parkway 2 Hitch Bike Rack Review - 2008 Jeep Liberty

Today on our 2008 Jeep Liberty, well be test fitting the Thule Parkway Two Bike Carrier for 2-inch hitches part number TH958. Now to begin our test fit, well simply slide the bike rack shank into the hitch, well line up the hitch pinhole and install and tighten down our anti-rattle bolt. With the bolt tight, our bike rack is secured to the vehicle. At this point, we can go ahead and give you a few measurements. From the closest point of the bike rack to the back of the vehicle is 5 inches and our ground clearance at the bike rack is 17 inches. Well now go ahead and pull the pin at the bottom of the bike rack mast to allow the mast to tilt down.

Thule Hitching Post Pro Hitch Bike Rack Review - 2008 Jeep Liberty

Today on our 2008 Jeep Liberty, well be test fitting the Thule Hitching Post Pro folding and tilting four bike rack with anti-sway cradles for both 1 -inch and 2-inch hitches part number TH934XTR. Now to begin our test fit, weve already installed the included adapter for the 2-inch hitch so well go ahead and slide the bike rack shank into the hitch, lineup the hitch pinhole and install and tighten down our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. At this point, well go ahead and give you a few measurements. From the closest point of our bike rack to the back of the vehicle is 10 inches and our ground clearance at the bike rack is 17 inches. Well now go ahead and pull the pin at the bottom of the bike rack mast to allow the mast to tilt down.

Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty, we'll be test fitting part number S64670, the Swagman XTC2 Platform Style Bike Carrier. Now to begin our test fit, we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. We'll now go ahead give you a few measurements. At the back of the bike rack, our ground clearance is 20 inches and from the closest point of the bike rack to the back of the vehicle is 9 inches. We'll now go ahead and fold the platform down and open our cargo door.

SportRack EZ Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty, we'll be test fitting part number A30901, the SportRack Two-Bike Hitch Mounted Bike Rack. Now to begin our test fit, we'll simply install the bike rack shank into the hitch using the included adaptor. With the hitch pin hole lined up, we'll go ahead and install our anti-rattle bolt which will secure our bike rack to the vehicle. Now we can go ahead and fold our platform down and open our cargo door. And as you can see, we can gain full access to the cargo area with this bike rack. We're now almost ready to load our bike.

Thule Hitching Post Pro Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty, well be test fitting the Thule Hitching Post Pro part number the TH934XTR. Now to begin our test fit, well simply slide the bike rack shank into the hitch, line up the hitch pinhole and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to our vehicle. Now well now go ahead and give you a few measurements. Our ground clearance at the bike rack is 16 inches and from the closest point of the bike rack to the back of the vehicle 10 inches. We can now pull the pin at the bottom of the mast to tilt our mast out of the way.

Thule Helium Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty, well be test fitting part number TH970XT, the Thule Helium Aluminum 2-Bike carrier. Now to begin our test fit, well simply slide the bike rack shank into the hitch, line up the hitch pinhole and install our attached hitch pin. We can then turn the anti-rattle knob on the back of the bike rack to secure it to our vehicle. Now well now go ahead and give you a few measurements. Our bike rack is 17 inches from the ground and from the closest point of the bike rack to the back of the vehicle 7 inches. Well go ahead and pull the hitch switch at the bottom of the bike rack mast to tilt the mast down.

Thule Doubletrack Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty, well be test fitting the Thule Doubletrack Platform-Style Bike carrier part number TH990XT. Now well begin our test fit by installing the bike rack shank into the hitch, lining up the hitch pinhole and installing our anti-rattle bolt. With our bolt tight, our bike racks secured to the vehicle. Now well go ahead and give you a few measurements. From the closest point of our bike rack to the back of the vehicle in the stored position is 7 inches. Now our ground clearance is 19 inches.

Thule Apex 4 Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty, well be test fitting the Thule Apex 4-Bike carrier part number TH9025. Now to begin our test fit, well simply slide the bike rack shank into the hitch, well pull our integrated locking hitch pin to allow it to go over the collar of the hitch. Once it goes over the collar of the hitch, we can then let go of the locking hitch pin and slide the bike rack shank all the way into the hitch. Then after giving it a slight tug, well tighten the anti-rattle knob down at the back of the bike rack and thatll secure our bike rack to the vehicle. Well now go ahead and give you a few measurements. Our ground clearance at the bike rack is 18 inches and from the anti-rattle knob to the back of the bumper is 4 inches.

Swagman Titan Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty, we'll be test fitting the Swagman Titan Four-Bike Carrier, part number S63410. Now to begin our test fit, we'll simply install the bike rack shank into the hitch, line up the hitch pin hole and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. Now we'll give you a few measurements. Our ground clearance at the bike rack is 19 1/2 inches and from the closest point of the bike rack to the back of the vehicle is 12 inches. We'll now go ahead and pull the hitch switch at the bottom of the bike rack mast to tilt the mast down and open our cargo door.

Thule Parkway 2 Hitch Bike Rack Review - 2012 Jeep Liberty

Today, on our 2012 Jeep Liberty, we will be test fitting the Thule Parkway 2 Bike Carrier, part number TH958. This bike rack will work with 2" hitches. With our bike rack already preassembled, we're ready to install it on the vehicle. We're going to go ahead and load it into the hitch, install the Anti-Rattle Colt and tighten it down using our 3/4" wrench. With our bike rack installed and secured, we're going to do a couple of the measurements from the lowest point of the bike rack to the floor is 17-1/2" from the closest point of the bike rack to the bumper is 5-1/2". Alright, what we're going to do now is to unfold the bike rack to gain access to the rear hitch and show you the clearance.

Pro Series Eclipse 4 Hitch Bike Rack Review - 2012 Jeep Liberty

Today on 2012 Jeep Liberty were going to do a test fit on the tow ready 4 bike hitch mounted bike carrier part number 63124. This bike carrier is a two-inch hitches only. With a bike carrier ready to go lets go ahead and install on a vehicle and see what it looks like. For the bike rack in the hitch were going tighten them down our anti rear bolt and install a safety pin. Okay the install of our bike rack is complete now let's going to give you a couple of measurements. Our ground clearance is 17 inches, and the clearance from the upright to the bumper is eight inches.

Yakima Holdup Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 jeep Liberty we will be test fitting the Yakima Holdup II Bike Carrier. With our bike rack already preassembled were going to go ahead and fit it to the vehicle. After lining up the hitch pin well go ahead and install our anti-rattle bolt and safety clip. Now that our bike rack is secure were going to go ahead and fold down the bike rack to show you rear cargo access. While the platform is in this down position well go ahead and give you some measurements. From the bike rack shank to the floor is 17 inches.

Yakima DoubleDown 5 Hitch Bike Rack Review - 2012 Jeep Liberty

Today on this 2012 Jeep Liberty were going to do a test fit of the Yakima Doubledown hitch mounted bike rack, part number Y02425. This bike rack is able to carry up to five bikes. The Doubledown bike rack is able to fit two inch and one and a quarter inch receivers. Were already set up for the two inch receive today. Lets go ahead and fit it on the vehicle and see what its going to look like. Well go ahead and install our hold down bolt and tighten it down.

Thule Vertex 4 Hitch Bike Rack Review - 2012 Jeep Liberty

Swagman XTC4 Wheel Mount Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty we will be test fitting the Swagman XTC 4 Bike Rack for a 2-inch trailer hitches, product number S64665. With our bike rack already preassembled, we're going to go ahead and install it on the vehicle. With the shank installed, and the pin hole lined up we'll go ahead and install our anti-rattle bolt and security pin lock. We're going to go ahead and use a 7/8-inch wrench to tighten up the anti-rattle bolt. With our wreck secured, we're going to ahead and give you a couple of measurement. The measurement from the shank to the floor is 16-1/2 inches.

Softride Dura Hitch Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty we will be test fitting the SoftRide Dura Parallelogram, product number SR26247. This bike rack will fit 2-inch hitches only. Our bike rack is already preassembled so we're ready to go ahead and fit it to the vehicle. Once we have the bike rack mounted into the hitch with the anti-rattle bolt snug, we'll go ahead and tighten that down. Now that we have our anti-rattle bolt tightened down, we'll go ahead and install our safety pin which is also our lock. Ok, what we're going to do now is to give you a couple of quick measurements.

Kuat NV 4 Hitch Mounted Bike Rack Review - 2012 Jeep Liberty

Today, on our 2012 Jeep Liberty, were gonna do a test fit of the Kuat NV 4-Bike Carrier part number N101-103. This carrier is only good for 2-inch hitches.With our bike carrier already setup, lets go ahead and install it on the vehicle.Well go ahead and slide the carriers shank into the hitch, put on our locking pin and tighten down that anti-rattle knob. Alright, with that, weve got our bike carrier installed on the vehicle.Lets go ahead and put our platform down. We have three measurements for you. From the very back of the platform is 2 feet from the ground. From the very lowest point on the shank to the ground is 16 inches and from the closest point on the platform to the bumper is 10 inches.As you can see, with the bike carrier unloaded and the platform down, there are plenty of room to access the rear cargo door.Now lets go ahead and load up a bike so we can see what it looks like with the bike installed.

Thule Passage Trunk Mounted Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty well be test fitting the Thule Passage two bike carrier part #: TH910XT. To begin our test fit well place the bike rack up against our cargo door and adjust it as necessary. The fit guide for this vehicle does say to set the fit dial to 11. With that done well go ahead and place the bike rack against the door and bring the two top straps up and hook them to the cargo door just behind the roof here on the roof line. Well then take the remaining four straps and hook one side of the strap to the side of the cargo door, here just above the taillight, and the other side to the cargo door just above the rear bumper fascia. Well then move around the bike rack, tightening up the straps, securing our bike rack to the vehicle.

Hollywood Racks Expedition Trunk Bike Rack Review - 2012 Jeep Liberty

Hollywood Racks Baja 3 Trunk Bike Rack Review - 2012 Jeep Liberty

Hollywood Racks Baja 2 Trunk Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty, we'll be test fitting the Hollywood Racks Baja 2-bike carrier trunk mount, part number HRB2. Now to begin our test fit, we'll place our bike rack up against our cargo door, allowing it to rest on the bumper fascia. We'll then take the two top hooks and hook them to the top of the cargo door here just behind the roof. With the two top hooks in place, we can then work around for the remaining four hooks, hooking them to the side of the cargo door here just above the taillight, and to the bottom of the door just above the bumper fascia. With all six hooks in place, we'll work our way around, tightening down the straps in an even pattern to secure the bike rack to the vehicle. With our bike rack secure, we'll now go ahead and fold up the remaining strap, to give us a nice, clean look.

Yakima KingJoe Pro Trunk Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty well be test fitting the Yakima King Joe Pro two bike trunk mounted bike rack, part number Y02624. To begin our test fit well place our bike rack against our cargo door. Well then take the two top straps and hook them to the door, just behind the roof line. Well go ahead and pull the straps semi-tight, just to hold the bike rack in place. Well then move down here to our side and bottom strap where well hook the hook marked side strap to the door here right next to the taillight. Now, you may need to open the door in order to get it hooked.

Yakima QuickBack 2 Bike Rack Review - 2012 Jeep Liberty

Today on our 2012 Jeep Liberty well be test fitting part number Y02621. This is the Yakima Quickback trunk mounted bike rack. Now all well need to do is place our bike rack up against our cargo door. Well then take the two top straps. Well then hook them to the door just behind the roof line. Now well go ahead and pull them snug just to hold the bike rack in place.

Yakima SpareTime Spare Tire Mount Bike Rack Review - 2006 Jeep Liberty

Today on our 2006 Jeep Liberty, we'll be test fitting the Yakima SpareTime 2 Bike Carrier, part number Y02598. Now, we've already gone ahead and removed our spare tire and we've also removed the center cap out of the spare wheel. We can now place our adapter plate onto the spare tire mount and reinstall our spare tire. With our spare tire tight, we're now ready to load our bike rack. We'll place the bike rack into the wheel mount adapter and tighten it down using the red knob. That will secure our bike rack to the vehicle.

Thule Spare Me Spare Tire Mount Bike Rack Review - 2006 Jeep Liberty

Today on our 2006 Jeep Liberty well be test fitting the Thule Spare Me 2 Bike Carrier Spare Tire Mount, part number TH963XTR. And to begin our test fit well need to remove the spare tire from the vehicle and with the spare tire off well also need to remove the center cap from the spare tire. We can then place the adapter plate onto the spare tire mount and reinstall our spare tire. With our spare tire back tight, we can then place our bike rack up and using the knob well tighten it down. That will secure our bike rack to the vehicle. Well now go ahead and undo the knobs to bring out our dual arms.

SportRack Spare Tire Mount Bike Rack Review - 2006 Jeep Liberty

Today on our 2006 Jeep Liberty, we'll be testing the SportRack 3 Bike Carrier Spare Tire Mount Bike Rack, part number A30813STL. Now, we've already gone ahead and removed our spare tire from the spare tire mount. So next, we'll go ahead and install our bike rack mount. We can then reinstall our spare tire. With our spare tire tight, we're ready to fit our bike rack. We'll slide the bike rack over the spare tire mount and tighten it down with the hand knob.

Hollywood Racks SR2 Spare Tire Mount Bike Rack Review - 2006 Jeep Liberty

Today on our 2006 Jeep Liberty well be test fitting the Hollywood Racks sr2 two by Carrier spare tire mount part number hrsr2. Now to begin weve already removed our spare tire from the spare tire mount so now we can install our adapter plate. We can then re-install our spare tire. With our spare tire tight were now ready to load the bike rack. Well slide the bike rack over the spare tire mount and tighten it down using the bolt. We can then install our cover.