Top 20 Most Popular Hyundai Sonata Bike Rackschange vehicle

Thule Vertex 4 Hitch Bike Rack Review - 2013 Hyundai Sonata

Today on our 2013 Hyundai Sonata we'll be test fitting the Thule Vertex Four Bike Carrier, part number th9029. Now with our two inch adapter already removed from our carrier, we'll slide the shank into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten with a wrench.Now with our Thule Vertex secured to our Hyundai Sonata we'll go over a few clearance measurements to see how they fit together. There's about 11 inches of ground clearance. Closest part of the carrier to the closest part of the vehicle here at the rear bumper is about four inches. With the cradle arms folded down we've added about 12 inches to the overall length of the vehicle.We'll now pull the gray lever at the top of the mast to swing the cradle arms out and we'll measure from the vehicle's trunk to the end of the carrier's cradle arms and we'll get a measurement of 41 inches. Now with this bike carrier and this vehicle you can access the trunk with the mast in its upright position or we can pull the handle at the bottom of the carrier to tilt the mast down.To load the bike we'll make sure that the mast is in its upright position, we'll undo the cradle straps, set the bike into the frame cradles and secure with the straps.

Thule Hitching Post Pro Hitch Bike Rack Review - 2013 Hyundai Sonata

Today on our 2013 Hyundai Sonata, we'll be test fitting the Thule Hitching Post Pro, part number TH934XTR. Now with our 2" adaptor already removed from our bike carrier, we'll begin our test fit by sliding the shank into our hitch, and line up our hitch pin holes. We'll then thread the anti-rattle bolt through the pin holes and tighten with a wrench, securing our bike carrier to our Hyundai Sonata. Now with the Hitching Post Pro secured to our vehicle, we'll go over a few clearance measurements to see how they fit together. There's about 11" of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 7".

Thule Apex 4 Swing Hitch Bike Rack Review - 2013 Hyundai Sonata

Today on our 2013 Hyundai Sonata, we'll be test fitting the Thule Apex Swing 4-bike carrier, part number TH9027. Now with our 2" adaptor removed from our bike carrier, we'll begin our test fit by sliding the shank of the carrier into the opening of the hitch, line up our pin holes, insert the spring-loaded pin into the pin holes, and turn the black knob to engage the anti-rattle device. Now with our Thule Apex secured to our Hyundai Sonata, we'll go over a few clearance measurements to see how they fit together. We have about 10" of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the vehicle's rear bumper is about 2". With the cradle arms folded down, we've added about 12" to the overall length of the vehicle.

Thule Apex 4 Hitch Bike Rack Review - 2013 Hyundai Sonata

Today on our 2013 Hyundai Sonata we'll be testing fitting the Thule Apex Four Bike Carrier, part number th9025. Now to begin our test fit with the two inch adapter removed from our carrier we'll slide the carrier shank into the opening of the hitch, insert the spring loaded pin into the pin hole and turn the black knob on the upper part of the shank to engage our anti-rattle device securing the carrier to our Sonata.We'll now go over a few clearance measurements to see how the Thule Apex and our Hyundai Sonata fit together. There's about 11 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about two inches. With the cradle arms folded down we've added about twelve inches to the overall length of the vehicle.We'll now pull the gray lever at the top of the mast to swing the cradle arms out and we'll measure from the vehicle's trunk to the end of the carrier's cradle arms and we'll get a measurement of 41 inches. Now with this bike carrier and this vehicle you can access the trunk with the mast of the carrier in its upright position or you can pull the gray lever at the bottom of the carrier to tilt the mast down.To load the bike we'll make sure that the mast is in its upright position.

SportRack Escape 3 Hitch Bike Rack Review - 2013 Hyundai Sonata

Today on our 2013 Hyundai Sonata, we'll be test fitting the SportRack Escape 3-bike carrier, part number A30403. To begin our test fit, we'll slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin holes, and tighten with a wrench. Now with the carrier secured to our Sonata, we'll go over a few clearance measurements to see how they fit together. There's about 9" of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 6". With the cradle arms folded down, we've added about 13" to the overall length of the vehicle.

Hollywood Racks Sport Rider Hitch Bike Rack Review - 2013 Hyundai Sonata

Today on our 2013 Hyundai Sonata, we'll be test fitting the Hollywood Racks Sport Rider 2-bike carrier, part number HR1000. Now to begin our test fit, with the 2" adaptor removed from the shank, we'll slide it into the hitch receiver, line up our pin holes, thread our anti-rattle bolt through the pin holes, and tighten with a wrench. Now with the Sport Rider secured to our Sonata, we'll go over a few clearance measurements to see how they fit together. There's about 16" of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 8". We've added a total of 25" to the overall length of the vehicle.

Prorack 2 Hitch Bike Rack Review - 2013 Hyundai Sonata

Today on our 2013 Hyundai Sonata, well be test fitting the Prorack hitch mounted 2-bike carrier, part number pr8062403. To begin our test fit, well need to install the shank of the bike rack into our receiver. Line up the pinholes and insert our anti-rattle bolt and then tighten it down with a wrench. And then we can insert the safety pin on the other side of the anti-rattle bolt. With our bolt tightened down, our bike rack is secured to our vehicle. And now well go over a few clearance measurements.

Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Hyundai Sonata

Today on this 2013 Hyundai Sonata Ill be showing you how to install and operate the Yakima Doubledown Ace four bike carrier. Notice that this Hyundai is equipped with a Class I hitch and will only be able to carry two bikes. To install the bike carrier slide the shank into the opening of the hitch tube and align the safety pin hole. Take the pin with the red knob and slide it into the pin hole. Tighten the black knob on the back of the carrier and engage the anti-rattle device. Now, lets go over some clearance measurements.

Thule Doubletrack Hitch Bike Rack Review - 2013 Hyundai Sonata

Today on this 2013 Hyundai Sonata Ill show you how to install and operate the Thule Doubletrack platform style two bike carrier. To install slide the shank into the opening of the hitch tube and align the threaded bolt hole. Thread the anti-rattle bolt through the hole and tighten with a wrench. Now lets go over some clearance measurements. There is about eight inches of ground clearance. The closest part of the carrier to the closest part of the vehicle is about four and a half inches.

Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2013 Hyundai Sonata

Today on this 2013 Hyundai Sonata Ill show you how to install and operate the Swagman XTC2 bike carrier. To install, simply slide the shank into the opening of the hitch tube and align the threaded pin hole. Thread the pin through the threaded pin hole and tighten with a wrench. Once tightened, secure with the safety pin. Now lets go over some clearance measurements. There is about nine inches of ground clearance.

Swagman Titan Hitch Bike Rack Review - 2013 Hyundai Sonata

Today on our 2013 Hyundai Sonata Ill show you how to install and operate the Swagman Titan four bike carrier. As a reminder, this Hyundai Sonata is equipped with a Class I trailer hitch and this bike carrier will only be allowed to carry two bikes. To install, slide the shank into the opening of the hitch tube and align the threaded pin hole. Thread the anti-rattle bolt through the threaded pin hole and tighten with a wrench. Lets go over some clearance measurements. There is about nine inches of ground clearance.

Kuat Alpha Hitch Bike Rack Review - 2013 Hyundai Sonata

Today on this 2013 Hyundai Sonata Ill show you how to install and operate the Kuat Alpha folding white aluminum bike carrier. This Hyundai Sonata is equipped with a Class I hitch and allows the bike carrier to carry only two bikes. To install the carrier, slide the shank into the opening of the hitch tube and turn the black knob located at the base of the carrier to engage the anti-rattle device. Lets go over some clearance measurements. Theres about nine and three quarter inches of ground clearance. The closest part of the carrier to the closest part of the vehicle is about six inches.

Yakima FrontLoader Roof Bike Rack Review - 2013 Hyundai Sonata

Today on our 2013 Hyundai Sonata we'll be test fitting the Yakima FrontLoader Wheel Mount Bike Carrier, part number y02103. To begin our test fit we'll go ahead and place the bike rack onto the crossbars and we'll make sure that the front clamp here at the head of the bike rack goes around our front crossbar. We'll then move to the rear clamp where we'll make sure that the clamp runs underneath the rear crossbar adjusting it as necessary.We can then take the T-bolt, pass it through the clamp, twist it a quick 90 degrees and tighten down the wing nut securing the rear clamp to the rear crossbar. We'll move back to the head of the bike rack where we'll tighten down the wing nut here on the front clamping the front head to our front crossbar thereby securing our bike rack to the vehicle.We'll now go ahead and fold the front wheel hoop up and undo the strap for our rear wheel. We'll then place the bike into the carrier making sure that the front wheel rolls forward into the front wheel hoop. We'll also want to make sure that the rear front wheel hoop rolls up onto the wheel.

RockyMounts TieRod Roof Bike Rack Review - 2007 Hyundai Sonata

Today on our 2007 Hyundai Sonata, we'll be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part number RKY1014. Now, our vehicle is equipped with a roof rack system and our bike carrier is pre-assembled, so we're ready to fit it to the vehicle. We'll begin by placing the bike rack on top of our crossbars. We'll need to make sure that the head of the bike rack is directly over the front crossbar. We'll take the rubber coated steel straps and run underneath the front crossbar and hook them back to the head of the bike rack. We'll then move to the rear crossbar, but we'll make sure that the clamp goes underneath the rear crossbar and we loosely secure it with the wing nuts included with the bike rack.

Thule Sidearm Roof Bike Rack Review - 2009 Hyundai Sonata

Today on this 2009 Hyundai Sonata, we're going to do a test fit of part number TH594XT from Thule. This is a side arm wheel mount bike carier. Our vehicles are already equipped with the Thule roof rack using the square loadbars and our bike rack has already been assembled according to the instructions so what we got to do is just place on the roof rack. We'll go ahead and place the bike rack onto the roof rack and we'll go ahead and install the clamps on the rail going towards the front post. We'll do the in board side and then move to the outboard side of the clamp. Now we still want to leave everything loose so we can move around to it's final position.