Top 20 Most Popular Honda Odyssey Weight Distributionschange vehicle

#1Reese 350 Mini-Lite Weight Distribution System w Sway Control for Light-Duty, A-Frame Trailers

Rating:
1 reviews

RP66024

Retail:$540.59

Price:$386.95

Product Summary:

view all Weight Distribution
WD With Sway Control
Electric Brake Compatible
Surge Brake Compatible
2-Point Friction
Trunnion-Style Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 3500 lbs GTW
200 lbs
300 lbs
Reese

more information      

Questions from Honda Odyssey owners about this product

• Comparing the Reese Mini 350 Weight Distribution System to the Pro Series RB2 for a 2500lb trailer
  
• When choosing a weight distribution system, the most important factor to consider is the fully loaded and ready to tow tongue weight of your trailer plus the weight of any cargo behind the rear axle of your 2004 Honda Odyssey. Tongue weight of a trailer is typically calculated to be 10 to 15 percent of the gross trailer weight. If your Scamp trailer weighs 2,700 lbs, then the tongue weight may be around 270 lbs to 405 lbs. You must then add the weight of the cargo that you load in the back of yo
  view full answer...


• How to Pick out a Weight Distribution System Honda Odyssey and 2004 Coachmen Clipper 1270st Pop Up
  
• Weight distribution systems are not vehicle specific. As long as your vehicle is rated to be used with a weight distribution hitch you can use a WD hitch. It should be listed in your owners manual under the towing section if your vehicle is rated for weight distribution. If Honda prohibits their use, we cannot recommend using a W/D system. The key to picking out the best weight distribution system is knowing the loaded tongue weight of your setup. I attached an FAQ article on how to determine
  view full answer...


• Suspension Enhancement Recommendation for a 2008 Honda Odyssey Towing a Boat Trailer
  
• I can help you out and make it really simple for you. Honda states that weight distribution cannot be installed on their vehicles (this information should be in the owners manual). So that leaves suspension enhancement which will be more cost effective and easier to install anyway so it is a win/win. There are a few different system for your 2008 Honda Odyssey, see link. The air bag types are great for carrying various load sizes that change frequently. But for a vehicle that will basically b
  view full answer...


• Weight Distribution and Transmission Cooler Recommendations for a 2006 Honda Odyssey
  
• First, when choosing a weight distribution system, you will want to go by the tongue weight of the trailer when loaded and ready to tow plus the weight of anything loaded behind the rear axle of the towing vehicle. Provided that this total weight is within the 100 to 350 pound tongue weight and 3,500 pound gross trailer weight limits of the system, you can use the Reese Mini-Lite Weight Distribution System, # RP66024. A weight distribution system will help with vehicle sag, which should not b
  view full answer...


• Weight Distribution Recommendation for a 2006 Honda Odyssey and 2012 R-Pod 177 Trailer
  
• The first thing you are going to want to do is make sure that the trailer hitch on your 2006 Honda Odyssey and the vehicle itself are rated for use with weight distribution. There should be a sticker on the hitch and for the vehicle look in the owners manual. On the Reese 350 system, # RP66024, the bars are 26 inches long. The brackets are about 6 inches long so you are looking at about 30 inches or so to the ends of the brackets. This is measuring back along the trailer frame from the cente
  view full answer...


• Which WD System Will Work With Reese Pole-Tongue Adapter # RP58393 Towing Trailer With Surge Brakes
  
• I would recommend to use the Reese SC Weight Distribution System w Sway Control - Trunnion - 10,000 lbs GTW, 600 lbs TW, part # RP66151. This system will work with the Reese Pole-Tongue Adapter, part # RP58393, on your 2003 Honda Odyssey. It has a tongue weight capacity range of 200 to 600 lbs. and a gross towing weight capacity of 10,000 lbs. I am including a link to the installation instructions on the Reese SC weight distribution system. The Reese Weight Distribution System, part # RP66041
  view full answer...

#2Pro Series Trunnion Style Weight Distribution Kit with Shank, 600 lbs. TW / 10,000 lbs. GTW

49585

Retail:$456.39

Price:$314.95

Product Summary:

view all Weight Distribution
WD Only
Electric Brake Compatible
Trunnion-Style Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 10000 lbs GTW
300 lbs
400 lbs
500 lbs
Pro Series

more information      

#3Pro Series Weight Distribution System w/ Friction Sway Control - Round - 10,000 lbs GTW, 550 lbs TW

Rating:
7 reviews

PS49901

Retail:$428.02

Price:$257.95

Product Summary:

view all Weight Distribution
WD With Sway Control
Electric Brake Compatible
Bar-Style Friction
Round Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 10000 lbs GTW
400 lbs
Pro Series

more information      

Questions from Honda Odyssey owners about this product

• Recommended Weight Distribution for 2008 Honda Odyssey Towing 2500 lb Boat Trailer
  
• Based on the excellent information you provided, the the total tongue weight (tongue weight of trailer plus cargo behind vehicle rear axle) will range between 450-550 lbs. I will proceed on the assumption that your boat trailer has a straight, or pole tongue versus an A-frame as is typical for a boat trailer. If your boat trailer uses a hydraulic surge coupler that compresses to actuate the trailer brakes, you will not be able to use a standard chain-suspended type W/D system like the # PS
  view full answer...

#4Reese SC Weight Distribution System w Sway Control - Trunnion - 10,000 lbs GTW, 800 lbs TW

Rating:
2 reviews

RP66153

Retail:$912.11

Price:$514.95

Product Summary:

view all Weight Distribution
WD With Sway Control
Electric Brake Compatible
Surge Brake Compatible
2-Point Friction
Trunnion-Style Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 10000 lbs GTW
500 lbs
600 lbs
700 lbs
Reese

more information      

#5Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 6,000 lbs GTW, 600 lbs TW

Rating:
4 reviews

FA94-00-0600

Price:$324.95

Product Summary:

view all Weight Distribution
WD With Sway Control
Electric Brake Compatible
Surge Brake Compatible
2-Point Friction
Round Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 6000 lbs GTW
400 lbs
500 lbs
Fastway

more information      

#6Pro Series Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch

Rating:
23 reviews

83660

Price:$54.95

Product Summary:

view all Weight Distribution
Sway Control Only
Electric Brake Compatible
Bar-Style Friction

Product Specs:

Shank Not Included
Pro Series

more information      

#7Reese Light-Duty Weight Distribution System - A-Frame - 4,000 lbs GTW, 400 TW

Rating:
3 reviews

RP66069

Retail:$636.26

Price:$454.95

Product Summary:

view all Weight Distribution
WD Only
Electric Brake Compatible
Round Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 4000 lbs GTW
200 lbs
300 lbs
Reese

more information      

Questions from Honda Odyssey owners about this product

• Is Weight Distribution Required for 2008 Honda Odyssey LX Towing A 2001 Starcraft 2960 Lb Camper
  
• A weight distribution system should be used any time the trailer weighs more than 50 percent of the vehicles weight. In your case the weight of the 2008 Honda Odyssey is 5952 lbs and the weight of your camper is 2960 lbs, so you are right at the 50 percent guideline. The reason that Honda states to use a weight distribution system is because the suspension of the Odyssey is not designed for towing, it is designed a little softer than normal for ride comfort. To be able to use weight distribut
  view full answer...

#8Pro Series Weight Distribution System w Friction Sway Control - Round - 10,000 lbs GTW, 1,000 lbs TW

Rating:
65 reviews

PS49903

Retail:$428.02

Price:$257.95

Product Summary:

view all Weight Distribution
WD With Sway Control
Electric Brake Compatible
Bar-Style Friction
Round Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 10000 lbs GTW
800 lbs
900 lbs
Pro Series

more information      

Questions from Honda Odyssey owners about this product

• Weight Distribution and Sway Control for a Starcraft Centennial Trailer and 2007 Honda Odyssey
  
• The Pro Series system # PS49903 that you have referenced is for trailers that have a tongue weight capacity between 750 and 1,000 pounds. This system is probably too heavy for your pop up trailer and you will experience a stiff ride. From the research I did, the camper will have a tongue weight of around 375 pounds. You then need to add to that the weight of anything loaded behind the rear axle of the van to get the total tongue weight. I recommend a system that is rated for 200 to 600 pounds
  view full answer...


• Weight Distribution Recommendation for a 3500 lb 2002 Coleman Utah
  
• The most important factor to consider when choosing a weight distribution system is knowing the tongue weight of your trailer when it is fully loaded and ready to tow. The weight distribution systems that we carry will list a tongue weight range. You will want to choose a system that has a tongue weight range that encompasses the fully loaded tongue weight of your trailer. Choosing a weight distribution system that is too heavy or too light for the tongue weight of your trailer will not impro
  view full answer...

#9Reese SC Weight Distribution System w Sway Control - Trunnion - 10,000 lbs GTW, 600 lbs TW

Rating:
4 reviews

RP66151

Retail:$912.11

Price:$515.95

Product Summary:

view all Weight Distribution
WD With Sway Control
Electric Brake Compatible
Surge Brake Compatible
2-Point Friction
Trunnion-Style Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 10000 lbs GTW
300 lbs
400 lbs
500 lbs
Reese

more information      

#10Pro Series RB2 Round Bar Weight Distribution Kit with Shank, 600 lbs TW / 10,000 lbs GTW

49568

Retail:$444.11

Price:$309.95

Product Summary:

view all Weight Distribution
WD Only
Electric Brake Compatible
Round Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 10000 lbs GTW
300 lbs
400 lbs
500 lbs
Pro Series

more information      

Questions from Honda Odyssey owners about this product

• Are CURT Trailer Hitches Compatible with Pro Series Weight Distribution Systems
  
• A CURT Trailer Hitch, like # C13068, is compatible with weight distribution systems made by Pro Series. On any hitch, you would check the installation instructions to determine if the hitch is rated for use with weight distribution. You will also want to check the vehicle owners manual to determine if the vehicle manufacturer allows the use of weight distribution. To determine the correct weight distribution system for you, you will want a system that has a tongue weigh capacity range that en
  view full answer...

#11Reese Light-Duty Weight Distribution System - Pole Tongue - 4,000 lbs GTW, 400 TW

RP66071

Retail:$525.35

Price:$374.95

Product Summary:

view all Weight Distribution
WD Only
Electric Brake Compatible
Round Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 4000 lbs GTW
200 lbs
300 lbs
Reese

more information      

#12Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 4,000 lbs GTW, 400 lbs TW

EQ90-00-0400

Retail:$710.00

Price:$574.95

Product Summary:

view all Weight Distribution
WD With Sway Control
Electric Brake Compatible
Surge Brake Compatible
4-Point Friction
Trunnion-Style Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 4000 lbs GTW
100 lbs
200 lbs
300 lbs
Equal-i-zer

more information      

#13Strait-Line Weight Distribution w Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW

Rating:
5 reviews

RP66074

Retail:$842.96

Price:$485.66

Product Summary:

view all Weight Distribution
WD With Sway Control
Electric Brake Compatible
Dual Cam
Trunnion-Style Bars

Product Specs:

Shank Not Included
Fits 2 Inch Hitch
Up to 12000 lbs GTW
700 lbs
800 lbs
900 lbs
1000 lbs
1100 lbs
Reese

more information      

#14Pro Series RB2 Round Bar Weight Distribution Kit with Shank, 1,200 lbs TW / 12,000 lbs GTW

Rating:
10 reviews

49570

Retail:$444.11

Price:$309.95

Product Summary:

view all Weight Distribution
WD Only
Electric Brake Compatible
Round Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 12000 lbs GTW
700 lbs
800 lbs
900 lbs
1000 lbs
1100 lbs
Pro Series

more information      

#15Reese Dual Cam High-Performance Sway Control

Rating:
8 reviews

RP26002

Retail:$299.58

Price:$184.95

Product Summary:

view all Weight Distribution
Sway Control Only
Electric Brake Compatible
Dual Cam

Product Specs:

Shank Not Included
Reese

more information      

#16Pro Series Weight Distribution System w/ Friction Sway Control - Round - 10,000 lbs GTW, 750 lbs TW

Rating:
9 reviews

PS49902

Retail:$428.02

Price:$257.95

Product Summary:

view all Weight Distribution
WD With Sway Control
Electric Brake Compatible
Bar-Style Friction
Round Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 10000 lbs GTW
600 lbs
Pro Series

more information      

#17Curt Trunnion Style Weight Distribution System with Shank, 600 lbs. TW, 10,000 lbs. GTW

17300

Retail:$491.66

Price:$295.00

Product Summary:

view all Weight Distribution
WD Only
Electric Brake Compatible
Trunnion-Style Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 10000 lbs GTW
400 lbs
500 lbs
Curt

more information      

#18Reese Weight Distribution System w Shank - Trunnion Bar - 10,000 lbs GTW, 600 lbs TW

Rating:
1 reviews

RP66540

Retail:$702.19

Price:$412.95

Product Summary:

view all Weight Distribution
WD Only
Electric Brake Compatible
Trunnion-Style Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 10000 lbs GTW
300 lbs
400 lbs
500 lbs
Reese

more information      

Questions from Honda Odyssey owners about this product

• What is the Distance from the Hitch to the Top of the Ball When Using Weight Distribution RP66540
  
• Reese part # RP54970 is the shank that is included in the weight distribution kit. If you flip the shank over, you will get as much as a 6 inch rise. That is 6 inches from the top of the receiver opening to the top of the WD head where the ball mounts. Hitch ball part # A-90 is a 2 inch diameter ball with about a 1 inch tall base, for a total of 3 inches from the base shoulder that rests on the WD head to the top of the ball. In total, from the top of the A-90 ball to the top of the receiver ope
  view full answer...

#19Reese Weight Distribution w/out Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW

Rating:
2 reviews

RP66022

Retail:$543.38

Price:$320.95

Product Summary:

view all Weight Distribution
WD Only
Electric Brake Compatible
Trunnion-Style Bars

Product Specs:

Shank Not Included
Fits 2 Inch Hitch
Up to 12000 lbs GTW
700 lbs
800 lbs
900 lbs
1000 lbs
1100 lbs
Reese

more information      

#20Strait-Line Weight Distribution System w Sway Control - Round Bar - 10,000 lbs GTW, 600 lbs TW

Rating:
2 reviews

RP66086

Retail:$929.22

Price:$564.95

Product Summary:

view all Weight Distribution
WD With Sway Control
Electric Brake Compatible
Dual Cam
Round Bars

Product Specs:

Includes Shank
Fits 2 Inch Hitch
Up to 10000 lbs GTW
300 lbs
400 lbs
500 lbs
Reese

more information      

Honda Odyssey Weight Distribution Questions

• Are CURT Trailer Hitches Compatible with Pro Series Weight Distribution Systems
  
• A CURT Trailer Hitch, like # C13068, is compatible with weight distribution systems made by Pro Series. On any hitch, you would check the installation instructions to determine if the hitch is rated for use with weight distribution. You will also want to check the vehicle owners manual to determine if the vehicle manufacturer allows the use of weight distribution. To determine the correct weight distribution system for you, you will want a system that has a tongue weigh capacity range that en
  view full answer...


• Comparing the Reese Mini 350 Weight Distribution System to the Pro Series RB2 for a 2500lb trailer
  
• When choosing a weight distribution system, the most important factor to consider is the fully loaded and ready to tow tongue weight of your trailer plus the weight of any cargo behind the rear axle of your 2004 Honda Odyssey. Tongue weight of a trailer is typically calculated to be 10 to 15 percent of the gross trailer weight. If your Scamp trailer weighs 2,700 lbs, then the tongue weight may be around 270 lbs to 405 lbs. You must then add the weight of the cargo that you load in the back of yo
  view full answer...


• Compatability of a 350 Mini Weight Distribution Hitch With Surge Brakes on a Jayco PopUp Trailer
  
• I spoke with my contact at Reese to make sure that the 350 Mini Weight Distribution for Fleetwood and Jayco Trailers with Swing-Up Jacks, item # RP66041, will be compatible with your trailer surge brake coupler. He stated that with the 350 Mini your surge coupler will still be able to compress, to activate the hydraulic brakes, when stopping but, you may experience slightly reduced braking pressure due to the friction pads on the 350 Mini system. This and the Reese SC style, item # RP66151, w
  view full answer...


• How to Pick out a Weight Distribution System Honda Odyssey and 2004 Coachmen Clipper 1270st Pop Up
  
• Weight distribution systems are not vehicle specific. As long as your vehicle is rated to be used with a weight distribution hitch you can use a WD hitch. It should be listed in your owners manual under the towing section if your vehicle is rated for weight distribution. If Honda prohibits their use, we cannot recommend using a W/D system. The key to picking out the best weight distribution system is knowing the loaded tongue weight of your setup. I attached an FAQ article on how to determine
  view full answer...


• Is Weight Distribution Required for 2008 Honda Odyssey LX Towing A 2001 Starcraft 2960 Lb Camper
  
• A weight distribution system should be used any time the trailer weighs more than 50 percent of the vehicles weight. In your case the weight of the 2008 Honda Odyssey is 5952 lbs and the weight of your camper is 2960 lbs, so you are right at the 50 percent guideline. The reason that Honda states to use a weight distribution system is because the suspension of the Odyssey is not designed for towing, it is designed a little softer than normal for ride comfort. To be able to use weight distribut
  view full answer...


• Recommendation for Weight Distribution on 2008 Honda Odyssey Towing a 3,500-Lb Jayco Travel Trailer
  
• Thanks for supplying all of the critical information of the trailer. This helps in choosing the correct system for your vehicle. To choose a weight distribution system you will need a system that has a tongue weight capacity range that encompasses the trailer tongue weight loaded and ready to tow, plus the weight of any gear in your 2008 Honda Odyssey EX, behind the rear axle. I am including a link to a FAQ page on weight distribution. With the gross trailer weight rating of your trailer a
  view full answer...


• Recommended Weight Distribution for 2008 Honda Odyssey Towing 2500 lb Boat Trailer
  
• Based on the excellent information you provided, the the total tongue weight (tongue weight of trailer plus cargo behind vehicle rear axle) will range between 450-550 lbs. I will proceed on the assumption that your boat trailer has a straight, or pole tongue versus an A-frame as is typical for a boat trailer. If your boat trailer uses a hydraulic surge coupler that compresses to actuate the trailer brakes, you will not be able to use a standard chain-suspended type W/D system like the # PS
  view full answer...


• Suspension Enhancement Recommendation for a 2008 Honda Odyssey Towing a Boat Trailer
  
• I can help you out and make it really simple for you. Honda states that weight distribution cannot be installed on their vehicles (this information should be in the owners manual). So that leaves suspension enhancement which will be more cost effective and easier to install anyway so it is a win/win. There are a few different system for your 2008 Honda Odyssey, see link. The air bag types are great for carrying various load sizes that change frequently. But for a vehicle that will basically b
  view full answer...


• Trailer Hitch, Weight Distribution and Accessories for a 2008 Honda Odyssey and Airstream Trailer
  
• First, the towing capacities of a vehicle are set. Even though a trailer hitch may be rated for use with weight distribution and the rating when using it is higher that still does not allow the vehicle to tow more weight than what it is rated for. You will need to get the tongue weight below the 350 pound limit of the vehicle to safely tow the trailer. You can do this by moving weight towards the back of the trailer if at all possible. For a trailer hitch the most popular option is the Hidden
  view full answer...


• Weight Distribution and Sway Control for a Starcraft Centennial Trailer and 2007 Honda Odyssey
  
• The Pro Series system # PS49903 that you have referenced is for trailers that have a tongue weight capacity between 750 and 1,000 pounds. This system is probably too heavy for your pop up trailer and you will experience a stiff ride. From the research I did, the camper will have a tongue weight of around 375 pounds. You then need to add to that the weight of anything loaded behind the rear axle of the van to get the total tongue weight. I recommend a system that is rated for 200 to 600 pounds
  view full answer...


• Weight Distribution and Transmission Cooler Recommendations for a 2006 Honda Odyssey
  
• First, when choosing a weight distribution system, you will want to go by the tongue weight of the trailer when loaded and ready to tow plus the weight of anything loaded behind the rear axle of the towing vehicle. Provided that this total weight is within the 100 to 350 pound tongue weight and 3,500 pound gross trailer weight limits of the system, you can use the Reese Mini-Lite Weight Distribution System, # RP66024. A weight distribution system will help with vehicle sag, which should not b
  view full answer...


• Weight Distribution Recommendation for a 2006 Honda Odyssey and 2012 R-Pod 177 Trailer
  
• The first thing you are going to want to do is make sure that the trailer hitch on your 2006 Honda Odyssey and the vehicle itself are rated for use with weight distribution. There should be a sticker on the hitch and for the vehicle look in the owners manual. On the Reese 350 system, # RP66024, the bars are 26 inches long. The brackets are about 6 inches long so you are looking at about 30 inches or so to the ends of the brackets. This is measuring back along the trailer frame from the cente
  view full answer...


• Weight Distribution Recommendation for a 3500 lb 2002 Coleman Utah
  
• The most important factor to consider when choosing a weight distribution system is knowing the tongue weight of your trailer when it is fully loaded and ready to tow. The weight distribution systems that we carry will list a tongue weight range. You will want to choose a system that has a tongue weight range that encompasses the fully loaded tongue weight of your trailer. Choosing a weight distribution system that is too heavy or too light for the tongue weight of your trailer will not impro
  view full answer...


• Weight Distribution System for a 2007 Honda Odyessey Pulling a Chalet Arrowhead
  
• You will need to do some measuring to determine if the 350 Mini will work on your trailer or not. The brackets that the spring bars set is will need to be installed at 28 inches from the center of the hitch ball. If you have open frame in this area then the 350 mini will work fine for your trailer. If you do not have room for the brackets on the frame you may have to consider a weight distribution system that has adjustable brackets like the High Performance Reese SC Weight Distribution System,
  view full answer...


• What is the Distance from the Hitch to the Top of the Ball When Using Weight Distribution RP66540
  
• Reese part # RP54970 is the shank that is included in the weight distribution kit. If you flip the shank over, you will get as much as a 6 inch rise. That is 6 inches from the top of the receiver opening to the top of the WD head where the ball mounts. Hitch ball part # A-90 is a 2 inch diameter ball with about a 1 inch tall base, for a total of 3 inches from the base shoulder that rests on the WD head to the top of the ball. In total, from the top of the A-90 ball to the top of the receiver ope
  view full answer...


• Which 350 Mini Weight Distribution Kit Should I Use With A 2008 Jayco 1207 and 2009 Honda Odyessey
  
• If your Jayco trailer has the Swing up jack on the outside of the trailer A-frame then you will need # RP66041, 350 Mini for Fleetwood and Jayco Trailers with Swing-Up Jacks. If your trailer has the jack mounted inside the A-frame then you should use # RP66024, 350 Mini for Light Duty Trailer with A-frame Jacks. The difference in the two kits is that the RP66041 model has longer 28 inch spring bars and an extra bracket that mounts to the head and allows clearance for the spring bars with the
  view full answer...


• Which WD System Will Work With Reese Pole-Tongue Adapter # RP58393 Towing Trailer With Surge Brakes
  
• I would recommend to use the Reese SC Weight Distribution System w Sway Control - Trunnion - 10,000 lbs GTW, 600 lbs TW, part # RP66151. This system will work with the Reese Pole-Tongue Adapter, part # RP58393, on your 2003 Honda Odyssey. It has a tongue weight capacity range of 200 to 600 lbs. and a gross towing weight capacity of 10,000 lbs. I am including a link to the installation instructions on the Reese SC weight distribution system. The Reese Weight Distribution System, part # RP66041
  view full answer...

Do you have a question?

Have a question about the best weight distribution for your Honda Odyssey? click here.