Top 20 Most Popular Honda Odyssey Cargo Carrierschange vehicle

Rola Hitch Cargo Carrier Review - 2012 Honda Odyssey

Today on our 2012 Honda Odyssey well be test fitting the Rola 23x56 Cargo Carrier for 2-inch hitches part number 59502. Now to begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pinholes, insert our pin through our pinholes and secure with a clip. Now with the carrier secured to the vehicle, well go over a few clearance measurements to see how this carrier and the vehicle fit together. There is about 11 inches of ground clearance from the rear of the carrier. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 5-1/2 inches. Weve added a total of 30 inches to the overall length of the vehicle.

Pro Series Hitch Cargo Carrier Review - 2012 Honda Odyssey

Today on our 2012 Honda Odyssey well be test fitting the Pro-Series 24x60 Railed Cargo Carrier for 2-inch hitches part number 63153. Now to begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin hole, insert our pin through our pin holes and secure with the clip. Now that the carrier is secured to the vehicle well go over a few clearance measurements to see how this carrier and the vehicle fit together. There is about 11 inches of ground clearance from the rear of the carrier. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is 6-1/2 inches. Weve added a total of 32 inches to the overall length of the vehicle.

Curt 20x60 Folding Aluminum Cargo Carrier Review - 2011 Honda Odyssey

Today on our 2011 Honda Odyssey well be test fitting part number C18100. This is the Curt 20 by 60 folding aluminum cargo carrier for two inch hitches. Now all well need to do to test fit this to the vehicle is slide in the cargo carrier shank, line up the hitch pin holes, and install the hitch pin. With the hitch pin in well go ahead and put the safety clip on the other side which will secure our cargo carrier to the vehicle. Now well go ahead and give you a few measurements. With the cargo carrier in the stored position it is of an inch from the closest point of the cargo carrier to the back of the vehicle.

Curt Hitch Cargo Carrier Review - 2011 Honda Odyssey

Today on our 2011 Honda Odyssey well be test fitting the Curt 20 by 48 cargo carrier for both inch and a quarter and two inch hitches, part number C18145. Now with our included adapter on our cargo carrier all well need to do is slide in the cargo carrier shank to the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. With our bolt tight our cargo carrier is secured to the vehicle. Well now go ahead and give you a few measurements. Our cargo carriers closest point to the back of the vehicle is a of an inch. The cargo carrier will add an additional 19 inches of overall length to the vehicle.

Rola Hitch Cargo Carrier Review - 2011 Honda Odyssey

Today on our 2011 Honda Odyssey well be test fitting the Rola 23-inch x 56-inch Railed Cargo Carrier part number 59502. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch and line up our hitch pin holes. Well then secure the carrier using a standard 5/8-inch pin and clip. Now well go over a handful of clearance measurements. Weve got about 13 inches of ground clearance at the rear of the carrier and about 5 inches of clearance between the closest part of the carrier and the closest part of our bumper. Overall, weve added about 29 inches of length to the rear of the vehicle.

Pro Series Hitch Cargo Carrier Review - 2011 Honda Odyssey

Today on our 2011 Honda Odyssey well be test fitting the Pro Series 24-inch x 60-inch Railed Cargo Carrier part number 63153. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes and secure the carrier with a standard 5/8-inch pin and clip. Now well go over a handful of clearance measurements. Weve got about 13 inches of ground clearance at the rear of the carrier. Weve got about 5-1/2 inches of clearance between the closest part of the carrier and the closest part of our bumper.

Curt Hitch Cargo Carrier Review - 2013 Honda Odyssey

Today on our 2013 Honda Odyssey well be test fitting the Curt 20 x 48 cargo carrier, part number C18145. To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our threaded pin holes, thread our anti-rattle bolt through the threaded pin hold and tighten with a wrench. Now lets go over some clearance measurements to see how the cargo carrier and this vehicle fit together. Theres about nine inches of ground clearance from the rear of the carrier. The closest part of the vehicle to the closest part of the carrier is about a half an inch. The closest part of the carrier to the closest part of the vehicles exhaust tip is about 11 inches.

Surco Hitch Cargo Carrier Review - 2013 Honda Odyssey

Today on our 2013 Honda Odyssey well be test fitting the 24 x 60 cargo carrier for two inch hitches from Surco, part number 52018. To begin well simply slide our cargo carrier shank into the hitch, line up the hitch pin hole and install our hitch pin. Well then put the clip on the other side of the pin which will secure our cargo carrier to the vehicle. Well now go ahead and give you a few measurements. From the closest point of the carrier to the back of the vehicle is a half inch, and the cargo carrier will add an additional 26 inches of overall length to the vehicle. The ground clearance at the back of the carrier is 10 inches, and the exhaust on this vehicle does exit the passengers side here at the rear bumper.

Rola Hitch Cargo Carrier Review - 2013 Honda Odyssey

Today on our 2013 Honda Odyssey well be test fitting the 23 by 56 railed cargo carrier, for two inch hitches, from Rola, part number 59502. Now to begin our test fit well slide our cargo carriers shank into the hitch, line up the hitch pin hole, and install our hitch pin. Well then put the clip on the other side which will secure our cargo carrier to the vehicle. Well now go ahead and give you a few measurements. From the closest point of the platform to the back of the vehicle is six and 1/2 inches. The cargo carrier will add an additional 31 inches of overall length to the vehicle.

Pro Series Hitch Cargo Carrier Review - 2013 Honda Odyssey

Today on our 2013 Honda Odyssey well be test fitting the Pro Series 24 x 60 rear cargo carrier for two inch hitches, part number 63153. To begin our test fit well slide the cargo carrier shank into the hitch, line up the hitch pin hole and install our hitch pin. Well then put the clip on the other side of the pin which will secure our cargo carrier to the vehicle. Well now go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is 7 inches, and the cargo carrier will add an additional 33 inches of overall length to the vehicle. The ground clearance at the back of the carrier is 13 inches, and the exhaust on this vehicle does exit the passenger side here at the rear bumper.

UWS Aluminum Cargo Carrier Review - 2009 Honda Odyssey

Today we have with us a 2009 Honda Odyssey and were going to be test fitting the UWS Aluminum Cargo Carrier part number UWS03511. To mount our carrier to our vehicle well insert the shank of the carrier into the receiver tube of the hitch on our van. Well line up the pin holes, feed the pin through and secure with a clip on the other side. We have about 1/4-inch between the furthest part of our bumper and the closest point of the bike rack. Weve added an overall length of about 23-1/2 inches to the rear of our vehicle. From the far corner of our cargo carrier to vehicles tailpipe weve got about 8 inches of clearance.

Surco Hitch Cargo Carrier Review - 2009 Honda Odyssey

Today on our 2009 Honda Odyssey, we're going to be test fitting Surco's 24-inch by 60-inch Cargo Carrier, part number 52018. To fit our carrier to our vehicle, we'll insert the shank of the carrier into the receiver tube of our hitch. We'll line up the hitch pin holes, feed the pin through and secure it with a clip on the other side. And now that we have our carrier secured, we're going to go over some clearance measurements. We've got about a quarter of an inch of clearance between the furthest point of our vehicle and the closest point of the cargo carrier. We've added about 26 inches of overall length to the rear of our vehicle.

Rola Hitch Cargo Carrier Review - 2009 Honda Odyssey

Today on our 2009 Honda Odyssey, we're going to be test fitting Rola's 23-inch by 56-inch Railed Cargo Carrier, part number 59502. To fit the cargo carrier to our vehicle, we'll insert the shank of the carrier into the receiver tube of our hitch. We'll line up the hitch pin holes and feed our pin through and secure with the clip on the other side. With our carrier attached, we're going to go over with some clearance measurements. We've got about 6-1/2 inches of clearance from our bumper to the closest point of the bike rack. We've added about 31 inches of overall length to the rear of our vehicle.

Pro Series Hitch Cargo Carrier Review - 2009 Honda Odyssey

Today on our 2009 Honday Odyssey, we're going to test fit the Pro Series 24-inch by 60-inch Railed Cargo Carrier, part number 63153. To mount the carrier to our vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch on the Odyssey. We'll line up the hitch pin holes, feed our pin through and secure it with a clip. With that, our cargo carrier is mounted to the vehicle and we can go over some quick clearance measurements. We've got about 7-1/4 inches between the furthest point of our bumper and the closest point of the cargo carrier. We've added about 32-3/4 inches of overall length to the vehicle.

Curt Hitch Cargo Carrier Review - 2007 Honda Odyssey

Today on our 2007 Honda Odyssey, well be test fitting the Curt 20 x 48 Cargo Carrier for both 1-1/4 inch and 2-inch hitches, part number C18145. Now with our adapter installed, well simply slide the cargo carrier shank into the hitch, line up the hitch pinhole, and install our anti-rattle bolt. With the bolt tight, our cargo carrier is secured to the vehicle and we can go ahead and load it up. Now, well go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is 1 inch, and well add an additional 20-1/4 inches of length to the overall vehicle. Now, with our exhaust exits on the passenger rear, but the cargo carrier is small enough and far enough away, there will be little to know transfer of heat from our tail pipe.

Surco Folding Hitch Cargo Carrier Review - 2007 Honda Odyssey

Today on our 2007 Honda Odyssey, well be test fitting part number 52018F the 24x60 folding cargo carrier by Surco. Now all we need to do to install our cargo carrier is slide the cargo carrier shank into the hitch, line up the hitch pinhole and install our hitch pin. And with that, our cargo carrier is secured and were ready to load it up. Now well give you a few measurements. In the stored position, the closest point of the cargo carrier to the back of the vehicle is -inch and our ground clearance at the bottom of the cargo carrier is 9 inches. Well now pull the pin to fold our cargo carrier down.

UWS Aluminum Cargo Carrier Review - 2007 Honda Odyssey

Today on our 2007 Honda Odyssey we'll be test fitting the 23 x 51 Aluminum Cargo Carrier for 2-inch hitches, part number UWS03511. Now all we'll need to do to fit the cargo carrier to the vehicle is simply install the cargo carrier shank into the hitch, line up the hitch pin hole, and install our hitch pin and that will secure our carrier to the vehicle. Now we'll give you a few measurements. The closest point on the cargo carrier to the back of the vehicle is a half an inch and the cargo carrier will add an additional 23-1/2 inches of overall length to the vehicle. Now the exhaust exits the passenger rear of the vehicle and the cargo carrier is small enough that it is not straight on to the tailpipe. There may be some slight heat transfer when driving down the road.

Curt 20x60 Folding Aluminum Cargo Carrier Review - 2007 Honda Odyssey

Today on our 2007 Honda Odyssey, well be test fitting the Curt 20x60 folding aluminum cargo carrier part number C18100. Now all we need to do to fit the cargo carrier to the vehicle is simply install the cargo carrier shank into the hitch, line up the hitch pinhole and install our hitch pin. And with that, well give you a few measurements. Our ground clearance at the bottom of the cargo carrier is 8 inches and in the stored position the cargo sits very close to the vehicle but its not impacted in anyway. After pulling the pin to fold our cargo carrier down, the closest point of the cargo carrier is 6 inches from the bumper. And the cargo carrier will add an additional 26 inches of overall length to the Honda Odyssey.

GearCage Extra Large Cargo Carrier Review - 2003 Honda Odyssey

Today we are going to do a quick review of the GearCage extra large cargo carrier from Highland, part number 5800200. We will be demonstrating this on a 2003 Honda Odyssey. Now you can tell we already have it installed on the 2 inch receiver hitch. Let us go ahead and install the anti rattle pin that comes with it. It threads in. We will tighten it down and install the clip. 0:22

Rola Roof Cargo Basket Installation - 2012 Honda Odyssey

Today on our 2012 Honda Odyssey, we'll be test fitting the Rola Roof Basket, part number 59504. With our Honda Odyssey equipped with the factory roof rack system and our basket pre-assembled, we're ready to go ahead and fit it to the vehicle. We'll begin by setting the basket on top of the roof rack crossbars. We'll center it from left to right with the vehicle. We'll then use the included hardware with the basket to secure it to the roof rack. And with our hardware all tight, our roof top cargo carrier is secured to the vehicle and we're ready to load it up.