Top 20 Most Popular Honda Odyssey Ball Mountschange vehicle

Draw-Tite Ball Mount Review - 2013 Honda Odyssey

Today on our 2013 Honda Odyssey, we'll be test-fitting the Draw Tite ball mount with three quarter-inch rise or two-inch drop part number 2923. To begin our test-fit we'll go ahead and get our hitch height. This is measuring from the ground to the inside top edge of our receiver tube. We have a hitch height of two inches. Now we'll go and pick our ball mount and install it in the drop position. We'll just line up the pinhole and then insert our pin and clip.

Curt Tri-Ball Mount Review - 2012 Honda Odyssey

Today on our 2012 Honda Odyssey well be test fitting the Curt tri ball mount for two inch hitches, part number C45001. Before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. This measurement may vary due to tire size, hitch style or after marker accessories. Well measure from the ground to the inside top of the receiver tube, and well get a measurement of 11 inches. To begin our test fit well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pinholes and secure with the clip on the other side.

Convert-A-Ball Ball Mount with 10 Inch Drop Review - 2012 Honda Odyssey

Today on our 2012 Honda Odyssey well be test fitting the Convert-A-Ball cushioned ball mount for two inch hitches with eight and three quarter inch rise, 14 inch drop rated at 10,000 pounds, part number AMSC10. Before we begin our test fit well first need to determine the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We get a measurement of 11 inches. To begin our test fit, in the rise position, well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through the pin holes and secure the clip on the other side. Well then measure from the ground to the top of the ball platform and well get a measurement of 19 inches.

Draw-Tite Ball Mount Review - 2012 Honda Odyssey

Today, on our 2012 Honda Odyssey we'll be test-fitting the Draw Tite Ball Mount 3/4-inch rise or 2-inch drop, rated at 6,000 pounds, part number 2923. Now, to begin our test-fit, first, we'll obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Our measurement is 11 inches. This measurement may vary to the tire size, hitch style, or aftermarket accessories. Now, we'll go ahead.

Hidden Hitch Ball Mount with 4 Inch Drop Review - 2012 Honda Odyssey

Today on our 2012 Honda Odyssey, we'll be test-fitting the Hidden Hitch ball mount with the 4 3/4-inch rise or 6-inch drop, rated at 6,000 pounds, part number 80240. Now, before we begin our test fit, we will first need to determine the hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube. Our measurement is 11 1/2 inches. This measurement may vary due to tire size, hitch style, or aftermarket accessories. Now, we'll go ahead into rise position, slide the shank of the ball mount into the opening of the hitch, line up our pinholes, insert our pin through our pinholes and secure the clip on the other side. We'll then measure from the ground to the top of the ball platform and we got a measurement of 16 inches.

Hidden Hitch Ball Mount with 4 Inch Drop Review - 2011 Honda Odyssey

Today on our 2011 Honda Odyssey well be test fitting the Hidden Hitch ball mount, part number 80240. Before we fit our ball mount we want to take on important measurement on the vehicle. We want to measure the hitch height and thats the measurement from the ground to the inside top edge of our receiver tube. Now remember this measurement will vary from vehicle to vehicle depending on tire size, exact model, or other aftermarket parts. Now since our hitch height measures 12 inches using this ball mount in the drop position would get us down to 6 inches which is probably too low to use with a trailer. So well show this ball mount only in the rise position.

Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2011 Honda Odyssey

Today on our 2011 Honda Odyssey well be test fitting the Convertible Cushion ball mount, part number AMSC4. Before we fit our ball mount we want to take one important measurement on the vehicle. We want to measure the hitch height and thats the measurement from the ground to the inside top edge of our receiver tube. Now remember this measurement will vary from vehicle to vehicle depending on tire size, exact model, or other aftermarket parts. On our particular Odyssey, with this particular hitch, we have a hitch height measurement of 12 inches. Now well go ahead and mount our ball mount in the drop position.

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2011 Honda Odyssey

Today on our 2011 Honda Odyssey well be test fitting the Convertible Cushion ball mount, part number AMSC2. Before we fit our ball mount we want to take one important measurement on the vehicle. We want to measure the hitch height and thats the measurement from the ground to the inside top edge of our receiver tube. Now remember this measurement will vary from vehicle to vehicle depending on tire size, exact model, or other aftermarket parts. On our particular Odyssey, with this particular hitch, we have a hitch height measurement of 12 inches. Now well go ahead and mount our ball mount in the drop position.

Draw-Tite Ball Mount Review - 2011 Honda Odyssey

Today on our 2011 Honda Odyssey well be test fitting the Draw-Tite Ball Mount part number 2923. Before we fit our ball mount we want to take one important measurement on the vehicle. We want to measure the hitch height and thats the measurement from the ground to the inside top edge of our receiver tube. Now remember this measurement will vary from vehicle to vehicle depending on tire size, exact model or other aftermarket parts. On our particular Odyssey with this particular hitch we have a hitch height measurement of 12 inches. Now well go ahead and mount the ball mount in the drop position.