Top 20 Most Popular GMC Acadia Bike Rackschange vehicle

Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2012 GMC Acadia

Swagman Titan Hitch Bike Rack Review - 2012 GMC Acadia

Yakima StickUp 2 Hitch Bike Rack Review - 2012 GMC Acadia

Today on our 2012 GMC Acadia well be test fitting the Yakima Stickup 2 Bike Carrier, part number Y02420. To begin our test fit well slide the shank of the carrier into the opening of the hitch tube, align our threaded pin hole throughout our anti-rattle bolt, through the threaded pin and tighten with a wrench. Now lets go over some clearance measurements to see how the bike carrier and this vehicle fit together. Theres about 17 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about three inches. Weve added about 11 inches to the overall length of the vehicle.

Yakima HighLite 2 Hitch Bike Rack Review - 2012 GMC Acadia

Today on this 2012 GMC Acadia, well be test fitting the Yakima High Lite aluminum two bike carrier, part number y02438. To begin our test fit well slide the shank of the carrier into the opening of the hitch tube, well align our pin hole, put our safety pin through our pin hole, and turn the black knob located at the rear of the carrier to engage our anti-rattle device. Now lets go over some clearance measurements to see how the bike carrier and this vehicle fit together, there is about 17-1/2 inches of ground clearance, the closet part of the vehicle to the closet part of the carrier is about three inches, weve added about 8-1/2 inches to the overall length of the vehicle. To access the cargo area lift up on the red knob located at the base of the carrier and tilt the carrier towards you, this will allow you to have access to your cargo door. To load the bike first make sure that the mast is in its upright position, pull the red latch located at the top of the mast, and tilt the cradle arms towards you, and undo the cradle straps, set the bike onto the frame cradles and secure it with the cradle straps, and that concludes todays test fit for the Yakima High Lite aluminum two bike carrier, part number y02438 on our 2012 GMC Acadia.

Thule Vertex 4 Hitch Bike Rack Review - 2012 GMC Acadia

Today on our 2012 GMC Acadia, well be test fitting the Thule Vertex 4 Bike Carrier, part number TH9029. To being our test fit well slide the shank of the carrier into the opening of the hitch tube, align our threaded pin holes and well then thread our anti-rattle bolt through the threaded pin hole and tighten with a wrench. Now lets go over some clearance measurements to see how the bike carrier and this vehicle fit together. There are about 16 and a half inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about two inches. Weve added about 12 inches to the overall length of the vehicle.

Thule T2 Platform Style Hitch Bike Rack Review - 2012 GMC Acadia

Today on our 2012 GMC Acadia, well be test fitting the Thule T2 Platform Style 2 Bike Carrier, part number TH916XTR. To being our test fit, well slide the shank of the carrier into the opening of the hitch tube, align up our threaded pin hole, start our anti-rattle bolt through the threaded pin hole and tighten with a wrench. Now lets go over some clearance measurements to see how this bike carrier and the vehicle fit together. Theres about 16 and a half inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about one inch. Weve added about 12 inches to the overall length of the vehicle.

Thule Hitching Post Pro Hitch Bike Rack Review - 2012 GMC Acadia

Today on this 2012 GMC Acadia, well be test fitting the Thule Hitching Post Pro, part number TH934XTR. To begin our test fit well slide the shank of the carrier into the opening of the hitch tube, align our threaded pin, thread our anti-rattle bolt through the threaded pin hole and tighten with a wrench. Now lets go over some clearance measurements to see how the bike carrier and this vehicle fit together. There are about 16 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about seven inches. Weve added about 16 inches to the overall length of the vehicle.

Thule Doubletrack Hitch Bike Rack Review - 2012 GMC Acadia

Today on our 2012 GMC Acadia, well be test fitting the Thule Doubletrack Platform-Style 2 Bike Carrier, part number TH990XT. To begin our test fit well slide the shank of the carrier into the opening of the hitch tube, align up our threaded pin hole and well thread our anti-rattle bolt through our threaded pin hole and tighten with a wrench. Now lets go over some clearance measurements to see how the bike carrier and this vehicle fit together. There are about 17 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about three inches. Weve added about nine inches to the overall length of the vehicle.

SportRack EZ Hitch Bike Rack Review - 2012 GMC Acadia

Today on our 2012 GMC Acadia, well be test fitting the SportRack 2 Bike Carrier, part number A30901. To begin our test fit well slide the shank of the carrier into the opening of the hitch tube, align our threaded pin hole, well then thread our anti-rattle bolt through the threaded pin and tighten with a wrench. Now lets go over some clearance measurements to see how the bike carrier and this vehicle fit together. There are about 17 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about seven inches. Weve added about 25 inches to the overall length of the vehicle.

Softride Dura Hitch Bike Rack Review - 2012 GMC Acadia

Today on our 2012 GMC Acadia, well be test fitting the Softride Dura Parallelogram Tilting 4 Bike Carrier, part number SR26247. To begin our test fit well slide the shank of the carrier into the opening of the hitch tube, align our threaded pin hole, thread our anti-rattle bolt through the threaded pin and tighten with a wrench. Now lets go over some clearance measurements to see how the bike carrier and this vehicle fit together. There are about 16 and a half inches of ground clearance. The closest part of the carrier to the closest part of the vehicle is about two inches. Weve added about 32 inches to the overall length of the vehicle.

RockyMounts PitchFork Roof Bike Rack Review - 2012 GMC Acadia

Today on our 2012 GMC Acadia, we'll be test fitting the RockyMounts Pitchfork roof-mounted bike carrier, part number RKY0438. Now with our roof rack system already assembled and onto our vehicle, we'll begin our test fit by placing the carrier onto the vehicle's cross bars. Note that you cannot access the Allen bolts on the front of the carrier without first removing the black plastic cap, as well as the skewer. We'll loosen up the Allen bolts at the head of the carrier, as well as the Allen bolts at the rear of the carrier, bringing both the brackets around the underside of each cross bar. We'll then use an Allen wrench to tighten down the bolts in the front and read of the carrier, securing the brackets to the front and rear cross bar. Once the carrier is secured to the vehicle, we're ready to load our bike.

RockyMounts TieRod Stretch Roof Bike Rack Review - 2012 GMC Acadia

Today on our 2012 GMC Acadia, well be test fitting the RockyMounts TieRod Stretch Roof Mounted Bike Carrier, part number RKY1011. Now with our roof rack system already assembled onto our vehicle, well begin our test fit by placing the carrier onto the vehicles crossbars. Well then remove the black plastic cap on the front of the carrier to bring the rubber coated steel straps around the underside of the crossbar. Well loosen up the Allen bolts at the rear of the carrier to bring the bracket around the rear crossbar and tighten it down as well as tightening down the front bolt on the front of the carrier to secure the rubber coated steel straps to the front crossbar. It is important to make sure before completely tightening down the carrier that, the carrier is perpendicular to the crossbars. This will ensure that, the bracket and rubber coated steel straps fit correctly onto the crossbars.

RockyMounts TieRod Roof Bike Rack Review - 2012 GMC Acadia

Today, on our 2012 GMC Acadia, we'll be test fitting the Rocky Mounts Tire Rod Roof-Mounted Bike Carrier, part number RKY1014. To begin our test fit, we'll place the Carrier onto the vehicle's crossbars. We'll then remove the black plastic head on the front of the Carrier and bring the rubber coated steel straps around the front crossbar, and by loosing up the Allen bolts, we'll bring the back bracket around the underside of the rear crossbar. After hooking the rubber coated steel straps into position, we'll tighten on the Allen bolt on the front of the Carrier as well as the Allen bolts at the rear of the Carrier, securing the rear bracket to the rear crossbar and the rubber coated steel straps to the front crossbar. Now that our Carrier is secured to the vehicle, we're ready to load our bike. We'll loosen up the skewer, as well as the rear tray strap.